lkml.org 
[lkml]   [2019]   [Dec]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/2] dt-bindings: mmc: clarify disable-wp text
Date
"disable-wp" has been removed from all Rockchip eMMC and SDIO dts nodes,
but people still continue to submit new patches with "disable-wp" added
to other nodes then for the SD card slot,
what it was designed for in the first place.
So clarify the "disable-wp" text by adding that this option should
not be used in combination with eMMC or SDIO.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---
Documentation/devicetree/bindings/mmc/mmc-controller.yaml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
index d668d0fbe..3c0df4016 100644
--- a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
+++ b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
@@ -99,7 +99,7 @@ properties:
dedicated write-protect detection logic. If a GPIO is always used
for the write-protect detection logic, it is sufficient to not
specify the wp-gpios property in the absence of a write-protect
- line.
+ line. Not used in combination with eMMC or SDIO.

wp-gpios:
description:
--
2.11.0
\
 
 \ /
  Last update: 2019-12-28 10:33    [W:0.074 / U:29.284 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site