lkml.org 
[lkml]   [2019]   [Dec]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1 1/4] Bluetooth: hci_qca: Add QCA Rome power off support to the qca_power_off()
Date
We will need to call the qca_power_off() API to power off Rome, add the
support into it. QCA Rome is using bt_en GPIO for power off, so we just
need to pull down this bt_en GPIO to power off it.

Signed-off-by: Rocky Liao <rjliao@codeaurora.org>
---
drivers/bluetooth/hci_qca.c | 21 +++++++++++++++++----
1 file changed, 17 insertions(+), 4 deletions(-)

diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index b602ed01505b..43fd84028786 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -1413,13 +1413,26 @@ static void qca_power_shutdown(struct hci_uart *hu)
static int qca_power_off(struct hci_dev *hdev)
{
struct hci_uart *hu = hci_get_drvdata(hdev);
+ struct qca_serdev *qcadev;
+ enum qca_btsoc_type soc_type = qca_soc_type(hu);
+
+ if (qca_is_wcn399x(soc_type)) {
+ /* Perform pre shutdown command */
+ qca_send_pre_shutdown_cmd(hdev);
+
+ usleep_range(8000, 10000);

- /* Perform pre shutdown command */
- qca_send_pre_shutdown_cmd(hdev);
+ qca_power_shutdown(hu);
+ } else {
+ if (hu->serdev) {
+ qcadev = serdev_device_get_drvdata(hu->serdev);
+
+ gpiod_set_value_cansleep(qcadev->bt_en, 0);

- usleep_range(8000, 10000);
+ usleep_range(8000, 10000);
+ }
+ }

- qca_power_shutdown(hu);
return 0;
}

--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
\
 
 \ /
  Last update: 2019-12-25 07:05    [W:0.167 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site