lkml.org 
[lkml]   [2019]   [Dec]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] powerpc/mpc85xx: also write addr_h to spin table for 64bit boot entry
Date
yingjie_bai@126.com writes:
> From: Bai Yingjie <byj.tea@gmail.com>
>
> CPU like P4080 has 36bit physical address, its DDR physical
> start address can be configured above 4G by LAW registers.
>
> For such systems in which their physical memory start address was
> configured higher than 4G, we need also to write addr_h into the spin
> table of the target secondary CPU, so that addr_h and addr_l together
> represent a 64bit physical address.
> Otherwise the secondary core can not get correct entry to start from.
>
> This should do no harm for normal case where addr_h is all 0.
>
> Signed-off-by: Bai Yingjie <byj.tea@gmail.com>
> ---
> arch/powerpc/platforms/85xx/smp.c | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
> index 8c7ea2486bc0..f12cdd1e80ff 100644
> --- a/arch/powerpc/platforms/85xx/smp.c
> +++ b/arch/powerpc/platforms/85xx/smp.c
> @@ -252,6 +252,14 @@ static int smp_85xx_start_cpu(int cpu)
> out_be64((u64 *)(&spin_table->addr_h),
> __pa(ppc_function_entry(generic_secondary_smp_init)));
> #else
> + /*
> + * We need also to write addr_h to spin table for systems
> + * in which their physical memory start address was configured
> + * to above 4G, otherwise the secondary core can not get
> + * correct entry to start from.
> + * This does no harm for normal case where addr_h is all 0.
> + */
> + out_be32(&spin_table->addr_h, __pa(__early_start) >> 32);
> out_be32(&spin_table->addr_l, __pa(__early_start));

This breaks the corenet32_smp_defconfig build:

/linux/arch/powerpc/platforms/85xx/smp.c: In function 'smp_85xx_start_cpu':
/linux/arch/powerpc/platforms/85xx/smp.c:262:52: error: right shift count >= width of type [-Werror=shift-count-overflow]
262 | out_be32(&spin_table->addr_h, __pa(__early_start) >> 32);
| ^~
cc1: all warnings being treated as errors

cheers

\
 
 \ /
  Last update: 2019-12-22 10:39    [W:0.071 / U:0.256 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site