Messages in this thread | | | Subject | Re: [PATCH 4/5] ARM: dts: mmp3: Add HSIC controllers | From | Lubomir Rintel <> | Date | Fri, 20 Dec 2019 08:05:50 +0100 |
| |
On Fri, 2019-12-20 at 07:53 +0100, Lubomir Rintel wrote: > There are two on MMP3, along with the PHYs. The PHYs are made compatible > with the NOP transceiver, since there's no driver for the time being and > they're likely configured by the firmware. > > Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> > --- > arch/arm/boot/dts/mmp3.dtsi | 44 +++++++++++++++++++++++++++++++++++++ > 1 file changed, 44 insertions(+) > > diff --git a/arch/arm/boot/dts/mmp3.dtsi b/arch/arm/boot/dts/mmp3.dtsi > index d9762de0ed34b..36c50706e60e0 100644 > --- a/arch/arm/boot/dts/mmp3.dtsi > +++ b/arch/arm/boot/dts/mmp3.dtsi > @@ -201,6 +201,50 @@ usb_otg0: usb-otg@d4208000 { > status = "disabled"; > }; > > + hsic_phy0: hsic-phy@f0001800 { > + compatible = "marvell,mmp3-hsic-phy", > + "usb-nop-xceiv",
I managed to mess this up right before sending it out. ^^^ Sorry for that. There should be a semicolon there. I'll fix this up on next patch spin.
> + reg = <0xf0001800 0x40>; > + #phy-cells = <0>; > + status = "disabled"; > + }; > + > + hsic0: hsic@f0001000 { > + compatible = "marvell,pxau2o-ehci"; > + reg = <0xf0001000 0x200>; > + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&soc_clocks MMP2_CLK_USBHSIC0>; > + clock-names = "USBCLK"; > + phys = <&hsic_phy0>; > + phy-names = "usb"; > + phy_type = "hsic"; > + #address-cells = <0x01>; > + #size-cells = <0x00>; > + status = "disabled"; > + }; > + > + hsic_phy1: hsic-phy@f0002800 { > + compatible = "marvell,mmp3-hsic-phy", > + "usb-nop-xceiv", > + reg = <0xf0002800 0x40>; > + #phy-cells = <0>; > + status = "disabled"; > + }; > + > + hsic1: hsic@f0002000 { > + compatible = "marvell,pxau2o-ehci"; > + reg = <0xf0002000 0x200>; > + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&soc_clocks MMP2_CLK_USBHSIC1>; > + clock-names = "USBCLK"; > + phys = <&hsic_phy1>; > + phy-names = "usb"; > + phy_type = "hsic"; > + #address-cells = <0x01>; > + #size-cells = <0x00>; > + status = "disabled"; > + }; > + > mmc1: mmc@d4280000 { > compatible = "mrvl,pxav3-mmc"; > reg = <0xd4280000 0x120>;
| |