lkml.org 
[lkml]   [2019]   [Dec]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [Patch V2 00/18] Tegra XUSB OTG support
From
Date


On 12/19/19 9:13 PM, Thierry Reding wrote:
> On Wed, Dec 18, 2019 at 02:46:13PM +0530, Nagarjuna Kristam wrote:
>> This patch series adds OTG support on XUSB hardware used in Tegra210 and
>> Tegra186 SoCs.
>>
>> This patchset is composed with :
>> - dt bindings of XUSB Pad Controller
>> - dt bindings for XUSB device Driver
>> - Tegra PHY driver for usb-role-switch and usb-phy
>> - Tegra XUSB host mode driver to support OTG mode
>> - Tegra XUSB device mode driver to use usb-phy and multi device mode
>> - dts for XUSB pad controller
>> - dts for xudc
>>
>> Tegra Pad controller driver register for role switch updates for
>> OTG/peripheral capable USB ports and adds usb-phy for that corresponding
>> USB ports.
>>
>> Host and Device mode drivers gets usb-phy from USB2's phy and registers
>> notifier for role changes to perform corresponding role tasks.
>>
>> Tests done:
>> - device mode support using micro-B USB cable connection between ubuntu
>> host and DUT on micro-B port
It's a micro-AB port according to Micro USB specifications.

>> - host mode support by connecting pen-drive to micro USB port on DUT
>> using micro-B OTG cable.
It's a standard-A to micro-A converter.

>> - toggling between these 2 modes by hot plugging corresponding cables.
>
> Are there any tests we can run without manual intervention? Can we force
> the device into peripheral mode and then setup a configuration using
> configfs? I'm not sure how useful that would be since it doesn't really
> exercise the driver code very much and doesn't tell whether it's
> actually working.
>
> Any other way how we can test this?
>
I don't think there is a way to test role-swap and host/device driver without
swapping cables. Thanks.

> Thierry
>
>>
>> DUT: Jetson-tx1, Jetson tx2.
>>
>> V2:
>> - Updated usb-role-switch documentation for Padctl driver.
>> - Update XUDC bindings doc as suggested by Rob.
>> - Used standard error codes for error return.
>> - Added of_platform_depopulate during error and driver removal.
>> - Updated error variable during phy initialization in XUDC driver.
>> - Updated Tegra210 soc dtb file as per changes to binding doc.
>>
>> Nagarjuna Kristam (18):
>> dt-bindings: phy: tegra-xusb: Add usb-role-switch
>> dt-bindings: usb: Add NVIDIA Tegra XUSB device mode controller binding
>> phy: tegra: xusb: Add usb-role-switch support
>> phy: tegra: xusb: Add usb-phy support
>> phy: tegra: xusb: Add support to get companion USB 3 port
>> phy: tegra: xusb: Add set_mode support for USB 2 phy on Tegra210
>> phy: tegra: xusb: Add set_mode support for utmi phy on Tegra186
>> usb: xhci-tegra: Add OTG support
>> usb: gadget: tegra-xudc: Remove usb-role-switch support
>> usb: gadget: tegra-xudc: Add usb-phy support
>> usb: gadget: tegra-xudc: use phy_set_mode to set/unset device mode
>> usb: gadget: tegra-xudc: support multiple device modes
>> arm64: tegra: update OTG port entries for jetson-tx1
>> arm64: tegra: update OTG port entries for jetson-tx2
>> arm64: tegra: Add xudc node for Tegra210
>> arm64: tegra: Enable xudc on Jetson TX1
>> arm64: tegra: Add xudc node for Tegra186
>> arm64: tegra: Enable xudc node on Jetson TX2
>>
>> .../bindings/phy/nvidia,tegra124-xusb-padctl.txt | 6 +
>> .../devicetree/bindings/usb/nvidia,tegra-xudc.yaml | 190 ++++++++++++++
>> arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts | 23 +-
>> arch/arm64/boot/dts/nvidia/tegra186.dtsi | 19 ++
>> arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi | 34 ++-
>> arch/arm64/boot/dts/nvidia/tegra210.dtsi | 19 ++
>> drivers/phy/tegra/Kconfig | 1 +
>> drivers/phy/tegra/xusb-tegra186.c | 109 ++++++--
>> drivers/phy/tegra/xusb-tegra210.c | 126 ++++++++--
>> drivers/phy/tegra/xusb.c | 134 ++++++++++
>> drivers/phy/tegra/xusb.h | 5 +
>> drivers/usb/gadget/udc/tegra-xudc.c | 276 ++++++++++++++-------
>> drivers/usb/host/xhci-tegra.c | 225 ++++++++++++++++-
>> include/linux/phy/tegra/xusb.h | 2 +
>> 14 files changed, 1031 insertions(+), 138 deletions(-)
>> create mode 100644 Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml
>>
>> --
>> 2.7.4
>>

\
 
 \ /
  Last update: 2019-12-20 08:36    [W:0.242 / U:0.556 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site