lkml.org 
[lkml]   [2019]   [Dec]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] dt-bindings: phy: Add YAML schemas for Intel Combo phy
Date
Combo phy subsystem provides PHY support to number of
controllers, viz. PCIe, SATA and EMAC.
Adding YAML schemas for the same.

Signed-off-by: Dilip Kota <eswara.kota@linux.intel.com>
---
.../devicetree/bindings/phy/intel,combo-phy.yaml | 147 +++++++++++++++++++++
1 file changed, 147 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/intel,combo-phy.yaml

diff --git a/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml b/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml
new file mode 100644
index 000000000000..fc9cbad9dd88
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml
@@ -0,0 +1,147 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/intel,combo-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Combo phy Subsystem
+
+maintainers:
+ - Dilip Kota <eswara.kota@linux.intel.com>
+
+description: |
+ Intel combo phy subsystem supports PHYs for PCIe, EMAC and SATA
+ controllers. A single combo phy provides two PHY instances.
+
+properties:
+ $nodename:
+ pattern: "^combophy@[0-9]+$"
+
+ compatible:
+ items:
+ - const: intel,combo-phy
+ - const: simple-bus
+
+ cell-index:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Index of Combo phy hardware instance.
+
+ resets:
+ maxItems: 2
+
+ reset-names:
+ items:
+ - const: phy
+ - const: core
+
+ intel,syscfg:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: Chip configuration registers handle
+
+ intel,hsio:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: HSIO registers handle
+
+ intel,bid:
+ description: Index of HSIO bus
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - minimum: 0
+ - maximum: 1
+
+ intel,cap-pcie-only:
+ description: |
+ This flag specifies capability of the combo phy.
+ If it is set, combo phy has only PCIe capability.
+ Else it has PCIe, XPCS and SATA PHY capabilities.
+ type: boolean
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 1
+
+ ranges: true
+
+patternProperties:
+ "^cb[0-9]phy@[0-9]+$":
+ type: object
+
+ properties:
+ compatible:
+ const: intel,phydev
+
+ "#phy-cells":
+ const: 0
+
+ reg:
+ description: Offset and size of pcie phy control registers
+
+ intel,phy-mode:
+ description: |
+ Configure the mode of the PHY.
+ 0 - PCIe
+ 1 - xpcs
+ 2 - sata
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - minimum: 0
+ - maximum: 2
+
+ clocks:
+ description: |
+ List of phandle and clock specifier pairs as listed
+ in clock-names property. Configure the clocks according
+ to the PHY mode.
+
+ resets:
+ description: |
+ reset handle according to the PHY mode.
+ See ../reset/reset.txt for details.
+
+ required:
+ - compatible
+ - reg
+ - "#phy-cells"
+ - clocks
+ - intel,phy-mode
+
+required:
+ - compatible
+ - cell-index
+ - "#address-cells"
+ - "#size-cells"
+ - ranges
+ - intel,syscfg
+ - intel,hsio
+ - intel,bid
+
+additionalProperties: false
+
+examples:
+ - |
+ combophy@0 {
+ compatible = "intel,combo-phy", "simple-bus";
+ cell-index = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ resets = <&rcu0 0x50 6>,
+ <&rcu0 0x50 17>;
+ reset-names = "phy", "core";
+ intel,syscfg = <&sysconf>;
+ intel,hsio = <&hsiol>;
+ intel,bid = <0>;
+
+ cb0phy0:cb0phy@0 {
+ compatible = "intel,phydev";
+ #phy-cells = <0>;
+ reg = <0xd0a40000 0x1000>;
+ clocks = <&cgu0 1>;
+ resets = <&rcu0 0x50 23>;
+ intel,phy-mode = <0>;
+ };
+ };
+
+
--
2.11.0
\
 
 \ /
  Last update: 2019-12-20 08:28    [W:2.235 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site