lkml.org 
[lkml]   [2019]   [Dec]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 1/3] drivers: thermal: tsens: Add critical interrupt support
On Fri, Nov 15, 2019 at 4:20 AM Stephen Boyd <swboyd@chromium.org> wrote:
>
> Quoting Amit Kucheria (2019-11-11 11:21:27)
> > diff --git a/drivers/thermal/qcom/tsens-common.c b/drivers/thermal/qcom/tsens-common.c
> > index 4359a4247ac3..2989cb952cdb 100644
> > --- a/drivers/thermal/qcom/tsens-common.c
> > +++ b/drivers/thermal/qcom/tsens-common.c
> > @@ -321,6 +357,65 @@ static inline u32 masked_irq(u32 hw_id, u32 mask, enum tsens_ver ver)
> > return 0;
> > }
> >
> > +/**
> > + * tsens_critical_irq_thread - Threaded interrupt handler for critical interrupts
> > + * @irq: irq number
> > + * @data: tsens controller private data
> > + *
> > + * Check all sensors to find ones that violated their critical threshold limits.
> > + * Clear and then re-enable the interrupt.
> > + *
> > + * The level-triggered interrupt might deassert if the temperature returned to
> > + * within the threshold limits by the time the handler got scheduled. We
> > + * consider the irq to have been handled in that case.
> > + *
> > + * Return: IRQ_HANDLED
> > + */
> > +irqreturn_t tsens_critical_irq_thread(int irq, void *data)
> > +{
> > + struct tsens_priv *priv = data;
> > + struct tsens_irq_data d;
> > + bool enable = true, disable = false;
>
> Why not just use true and false in the one place these variables are
> used?

Will fix.

> > + unsigned long flags;
> > + int temp, ret, i;
> > +
> > + for (i = 0; i < priv->num_sensors; i++) {
> > + struct tsens_sensor *s = &priv->sensor[i];
>
> Maybe make this const?

OK.

>
> > + u32 hw_id = s->hw_id;
> > +
> > + if (IS_ERR(priv->sensor[i].tzd))
>
> IS_ERR(s->tzd)?

Yup.

>
> > + continue;
> > + if (!tsens_threshold_violated(priv, hw_id, &d))
> > + continue;
> > + ret = get_temp_tsens_valid(s, &temp);
>
> Can this accept a const 's'?

Yes.

> > + if (ret) {
> > + dev_err(priv->dev, "[%u] %s: error reading sensor\n", hw_id, __func__);
> > + continue;
> > + }
> > +
> > + spin_lock_irqsave(&priv->ul_lock, flags);
> > +
> > + tsens_read_irq_state(priv, hw_id, s, &d);
> > +
> > + if (d.crit_viol &&
> > + !masked_irq(hw_id, d.crit_irq_mask, tsens_version(priv))) {
> > + tsens_set_interrupt(priv, hw_id, CRITICAL, disable);
> > + if (d.crit_thresh > temp) {
> > + dev_dbg(priv->dev, "[%u] %s: re-arm upper\n",
> > + priv->sensor[i].hw_id, __func__);
>
> hw_id instead of priv->sensor...?

Done. Will fixup for older code in a separate patch.

> > + } else {
> > + dev_dbg(priv->dev, "[%u] %s: TZ update trigger (%d mC)\n",
> > + hw_id, __func__, temp);
> > + }
> > + tsens_set_interrupt(priv, hw_id, CRITICAL, enable);
> > + }
> > +
> > + spin_unlock_irqrestore(&priv->crit_lock, flags);
> > + }
> > +
> > + return IRQ_HANDLED;
> > +}
> > +
> > /**
> > * tsens_irq_thread - Threaded interrupt handler for uplow interrupts
> > * @irq: irq number
> > diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
> > index 7d317660211e..784c4976c4f9 100644
> > --- a/drivers/thermal/qcom/tsens.c
> > +++ b/drivers/thermal/qcom/tsens.c
> > @@ -121,6 +121,27 @@ static int tsens_register(struct tsens_priv *priv)
> >
> > enable_irq_wake(irq);
> >
> > + if (tsens_version(priv) > VER_1_X) {
> > + irq = platform_get_irq_byname(pdev, "critical");
> > + if (irq < 0) {
> > + ret = irq;
> > + goto err_put_device;
> > + }
> > +
> > + ret = devm_request_threaded_irq(&pdev->dev, irq,
> > + NULL, tsens_critical_irq_thread,
> > + IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
> > + dev_name(&pdev->dev), priv);
> > + if (ret) {
> > + dev_err(&pdev->dev, "%s: failed to get critical irq\n", __func__);
> > + goto err_put_device;
>
> Do we need to disable_irq_wake() for the previous irq here?

Or we could just move the earlier enable_irq_wake() to after
successful registration of the critical interrupt to avoid the error
branch. See v2 posting.



> > + }
> > +
> > + enable_irq_wake(irq);
> > + }
> > +
> > + return 0;
> > +
> > err_put_device:
> > put_device(&pdev->dev);
> > return ret;

\
 
 \ /
  Last update: 2019-12-03 05:57    [W:0.070 / U:4.096 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site