lkml.org 
[lkml]   [2019]   [Dec]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRE: [PATCH] PCI: layerscape: Add the SRIOV support in host side
Date


> -----Original Message-----
> From: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> Sent: 2019年12月2日 19:02
> To: Xiaowei Bao <xiaowei.bao@nxp.com>
> Cc: robh+dt@kernel.org; frowand.list@gmail.com; M.h. Lian
> <minghuan.lian@nxp.com>; Mingkai Hu <mingkai.hu@nxp.com>; Roy Zang
> <roy.zang@nxp.com>; andrew.murray@arm.com; bhelgaas@google.com;
> devicetree@vger.kernel.org; linux-kernel@vger.kernel.org;
> linux-pci@vger.kernel.org; linux-arm-kernel@lists.infradead.org; Z.q. Hou
> <zhiqiang.hou@nxp.com>
> Subject: Re: [PATCH] PCI: layerscape: Add the SRIOV support in host side
>
> On Mon, Dec 02, 2019 at 06:45:06PM +0800, Xiaowei Bao wrote:
> > GIC get the map relations of devid and stream id from the msi-map
> > property of DTS, our platform add this property in u-boot base on the
> > PCIe device in the bus, but if enable the vf device in kernel, the vf
> > device msi-map will not set, so the vf device can't work, this patch
> > purpose is that manage the stream id and device id map relations
> > dynamically in kernel, and make the new PCIe device work in kernel.
> >
> > Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
> > ---
> > drivers/of/irq.c | 9 +++
> > drivers/pci/controller/dwc/pci-layerscape.c | 94
> +++++++++++++++++++++++++++++
> > drivers/pci/probe.c | 6 ++
> > drivers/pci/remove.c | 6 ++
> > 4 files changed, 115 insertions(+)
>
> NAK
>
> If u-boot is broken it should be fixed, we won't apply core PCI/OF changes to
> paper over it.

Thanks for your comments, I know this patch is not reasonable, but I have no other way,
I think all ARM platform have this issue if it get the stream ID from msi-map property of
DTS, do you have the best advice to make it reasonable, or do you know how other arm
vendors implement the mapping of stream id to request id? If all arm vendors use the
msi-map method, I do not think they can support the SRIOV VF function on the host side.
e.g. x710 enable VF:
echo 1 > /sys/class/net/eth0/device/sriov_numvfs
echo 1 > /sys/class/net/eth1/device/sriov_numvfs
Running this command is equivalent to dynamically adding a new PCIe device. The msi-map
will definitely not exist in DTS, so the VF device of x710 cannot work.

Thanks
Xiaowei

>
> Thanks,
> Lorenzo
>
> > diff --git a/drivers/of/irq.c b/drivers/of/irq.c index
> > a296eaf..791e609 100644
> > --- a/drivers/of/irq.c
> > +++ b/drivers/of/irq.c
> > @@ -576,6 +576,11 @@ void __init of_irq_init(const struct of_device_id
> *matches)
> > }
> > }
> >
> > +u32 __weak ls_pcie_streamid_fix(struct device *dev, u32 rid) {
> > + return rid;
> > +}
> > +
> > static u32 __of_msi_map_rid(struct device *dev, struct device_node
> **np,
> > u32 rid_in)
> > {
> > @@ -590,6 +595,10 @@ static u32 __of_msi_map_rid(struct device *dev,
> struct device_node **np,
> > if (!of_map_rid(parent_dev->of_node, rid_in, "msi-map",
> > "msi-map-mask", np, &rid_out))
> > break;
> > +
> > + if (rid_out == rid_in)
> > + rid_out = ls_pcie_streamid_fix(parent_dev, rid_in);
> > +
> > return rid_out;
> > }
> >
> > diff --git a/drivers/pci/controller/dwc/pci-layerscape.c
> > b/drivers/pci/controller/dwc/pci-layerscape.c
> > index f24f79a..c1b3675 100644
> > --- a/drivers/pci/controller/dwc/pci-layerscape.c
> > +++ b/drivers/pci/controller/dwc/pci-layerscape.c
> > @@ -22,6 +22,8 @@
> >
> > #include "pcie-designware.h"
> >
> > +#define FSL_PEX_STREAM_ID_START 7
> > +#define FSL_PEX_STREAM_ID_END 22
> > /* PEX1/2 Misc Ports Status Register */
> > #define SCFG_PEXMSCPORTSR(pex_idx) (0x94 + (pex_idx) * 4)
> > #define LTSSM_STATE_SHIFT 20
> > @@ -33,8 +35,16 @@
> > #define PCIE_ABSERR 0x8d0 /* Bridge Slave Error Response
> Register */
> > #define PCIE_ABSERR_SETTING 0x9401 /* Forward error of non-posted
> request */
> >
> > +/* LUT registers */
> > +#define PCIE_LUT_UDR(n) (0x800 + (n) * 8)
> > +#define PCIE_LUT_LDR(n) (0x804 + (n) * 8)
> > +#define PCIE_LUT_ENABLE (1 << 31)
> > +#define PCIE_LUT_ENTRY_COUNT 32
> > +
> > #define PCIE_IATU_NUM 6
> >
> > +unsigned long *stream_id_map;
> > +
> > struct ls_pcie_drvdata {
> > u32 lut_offset;
> > u32 ltssm_shift;
> > @@ -49,6 +59,7 @@ struct ls_pcie {
> > struct regmap *scfg;
> > const struct ls_pcie_drvdata *drvdata;
> > int index;
> > + unsigned long *lut_reg_map;
> > };
> >
> > #define to_ls_pcie(x) dev_get_drvdata((x)->dev)
> > @@ -291,6 +302,77 @@ static int __init ls_add_pcie_port(struct ls_pcie
> *pcie)
> > return 0;
> > }
> >
> > +u32 ls_pcie_streamid_fix(struct device *dev, u32 rid) {
> > + u32 lut_idx, streamid, val;
> > + struct platform_device *pdev = to_platform_device(dev);
> > + struct ls_pcie *pcie = platform_get_drvdata(pdev);
> > +
> > + for (lut_idx = 0; lut_idx < PCIE_LUT_ENTRY_COUNT; lut_idx++) {
> > + val = ioread32(pcie->lut + PCIE_LUT_UDR(lut_idx)) >> 16;
> > + if (val == rid) {
> > + streamid = ioread32(pcie->lut + PCIE_LUT_LDR(lut_idx)) &
> > + (~PCIE_LUT_ENABLE);
> > + break;
> > + }
> > + }
> > +
> > + return streamid;
> > +}
> > +
> > +void ls_pcie_remove_streamid(struct pci_bus *bus, struct pci_dev
> > +*pdev) {
> > + struct pcie_port *pp = bus->sysdata;
> > + struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> > + struct ls_pcie *pcie = to_ls_pcie(pci);
> > + u32 lut_idx, streamid, rid, val;
> > +
> > + rid = PCI_DEVID(pdev->bus->number, pdev->devfn);
> > +
> > + for (lut_idx = 0; lut_idx < PCIE_LUT_ENTRY_COUNT; lut_idx++) {
> > + val = ioread32(pcie->lut + PCIE_LUT_UDR(lut_idx)) >> 16;
> > + if (val == rid) {
> > + streamid = ioread32(pcie->lut + PCIE_LUT_LDR(lut_idx)) &
> > + (~PCIE_LUT_ENABLE);
> > + break;
> > + }
> > + }
> > +
> > + if (lut_idx >= PCIE_LUT_ENTRY_COUNT) {
> > + pr_err("Don't find the streamid relate to the rid !\n");
> > + return;
> > + }
> > +
> > + iowrite32(0, pcie->lut + PCIE_LUT_UDR(lut_idx));
> > + iowrite32(0, pcie->lut + PCIE_LUT_LDR(lut_idx));
> > +
> > + clear_bit(streamid, stream_id_map);
> > + clear_bit(lut_idx, pcie->lut_reg_map); }
> > +
> > +void ls_pcie_add_streamid(struct pci_bus *bus, struct pci_dev *pdev)
> > +{
> > + u32 free_lut, free_streamid, rid;
> > + struct pcie_port *pp = bus->sysdata;
> > + struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> > + struct ls_pcie *pcie = to_ls_pcie(pci);
> > +
> > + rid = PCI_DEVID(pdev->bus->number, pdev->devfn);
> > +
> > + free_streamid = find_first_zero_bit(stream_id_map,
> > + FSL_PEX_STREAM_ID_END);
> > +
> > + free_lut = find_first_zero_bit(pcie->lut_reg_map,
> > + PCIE_LUT_ENTRY_COUNT);
> > +
> > + iowrite32(rid << 16, pcie->lut + PCIE_LUT_UDR(free_lut));
> > + iowrite32(free_streamid | PCIE_LUT_ENABLE,
> > + pcie->lut + PCIE_LUT_LDR(free_lut));
> > +
> > + set_bit(free_streamid, stream_id_map);
> > + set_bit(free_lut, pcie->lut_reg_map); }
> > +
> > static int __init ls_pcie_probe(struct platform_device *pdev) {
> > struct device *dev = &pdev->dev;
> > @@ -298,6 +380,7 @@ static int __init ls_pcie_probe(struct
> platform_device *pdev)
> > struct ls_pcie *pcie;
> > struct resource *dbi_base;
> > int ret;
> > + u32 id;
> >
> > pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
> > if (!pcie)
> > @@ -324,6 +407,17 @@ static int __init ls_pcie_probe(struct
> platform_device *pdev)
> > if (!ls_pcie_is_bridge(pcie))
> > return -ENODEV;
> >
> > + stream_id_map = devm_kcalloc(dev,
> > + BITS_TO_LONGS(FSL_PEX_STREAM_ID_END),
> > + sizeof(long), GFP_KERNEL);
> > +
> > + for (id = 0; id < FSL_PEX_STREAM_ID_START; id++)
> > + set_bit(id, stream_id_map);
> > +
> > + pcie->lut_reg_map = devm_kcalloc(dev,
> > + BITS_TO_LONGS(PCIE_LUT_ENTRY_COUNT),
> > + sizeof(long), GFP_KERNEL);
> > +
> > platform_set_drvdata(pdev, pcie);
> >
> > ret = ls_add_pcie_port(pcie);
> > diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index
> > 512cb43..d4729b4 100644
> > --- a/drivers/pci/probe.c
> > +++ b/drivers/pci/probe.c
> > @@ -2380,6 +2380,10 @@ static void pci_set_msi_domain(struct pci_dev
> *dev)
> > dev_set_msi_domain(&dev->dev, d);
> > }
> >
> > +void __weak ls_pcie_add_streamid(struct pci_bus *bus, struct pci_dev
> > +*pdev) { }
> > +
> > void pci_device_add(struct pci_dev *dev, struct pci_bus *bus) {
> > int ret;
> > @@ -2417,6 +2421,8 @@ void pci_device_add(struct pci_dev *dev, struct
> pci_bus *bus)
> > ret = pcibios_add_device(dev);
> > WARN_ON(ret < 0);
> >
> > + ls_pcie_add_streamid(bus, dev);
> > +
> > /* Set up MSI IRQ domain */
> > pci_set_msi_domain(dev);
> >
> > diff --git a/drivers/pci/remove.c b/drivers/pci/remove.c index
> > e9c6b12..af6cc7f 100644
> > --- a/drivers/pci/remove.c
> > +++ b/drivers/pci/remove.c
> > @@ -62,11 +62,17 @@ void pci_remove_bus(struct pci_bus *bus) }
> > EXPORT_SYMBOL(pci_remove_bus);
> >
> > +void __weak ls_pcie_remove_streamid(struct pci_bus *bus, struct
> > +pci_dev *pdev) { }
> > +
> > static void pci_stop_bus_device(struct pci_dev *dev) {
> > struct pci_bus *bus = dev->subordinate;
> > struct pci_dev *child, *tmp;
> >
> > + ls_pcie_remove_streamid(dev->bus, dev);
> > +
> > /*
> > * Stopping an SR-IOV PF device removes all the associated VFs,
> > * which will update the bus->devices list and confuse the
> > --
> > 2.9.5
> >
\
 
 \ /
  Last update: 2019-12-03 02:28    [W:0.117 / U:4.988 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site