lkml.org 
[lkml]   [2019]   [Dec]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] ARM: OMAP2+: Fix warnings with broken omap2_set_init_voltage()
On Mon, 2 Dec 2019 22:09:26 +0100
"H. Nikolaus Schaller" <hns@goldelico.com> wrote:

> Hi Tony,
>
> > Am 25.09.2019 um 01:32 schrieb Tony Lindgren <tony@atomide.com>:
> >
> > This code is currently unable to find the dts opp tables as ti-cpufreq
> > needs to set them up first based on speed binning.
> >
> > We stopped initializing the opp tables with platform code years ago for
> > device tree based booting with commit 92d51856d740 ("ARM: OMAP3+: do not
> > register non-dt OPP tables for device tree boot"), and all of mach-omap2
> > is now booting using device tree.
> >
> > We currently get the following errors on init:
> >
> > omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu
> > omap2_set_init_voltage: unable to set vdd_mpu
> > omap2_set_init_voltage: unable to find boot up OPP for vdd_core
> > omap2_set_init_voltage: unable to set vdd_core
> > omap2_set_init_voltage: unable to find boot up OPP for vdd_iva
> > omap2_set_init_voltage: unable to set vdd_iva
> >
> > Let's just drop the unused code. Nowadays ti-cpufreq should be used to
> > to initialize things properly.
> >
> > Cc: Adam Ford <aford173@gmail.com>
> > Cc: André Roth <neolynx@gmail.com>
> > Cc: "H. Nikolaus Schaller" <hns@goldelico.com>
> > Cc: Nishanth Menon <nm@ti.com>
> > Cc: Tero Kristo <t-kristo@ti.com>
> > Signed-off-by: Tony Lindgren <tony@atomide.com>
> > ---
> >
> > Guys, please check and ack if we can really do this to get rid of some
> > pointless dmesg -l3 errors without affecting the ongoing cpufreq and
> > voltage work.
>
> unfortunately we did not yet test in combination with the 1GHz OPP
> patches for omap3630 (queued for v5.5-rc1) and it appears that this
> patch breaks the 1GHz OPP.
>
> The symptom is that it works fine on a dm3730 with 800MHz rating
> but results in spurious kernel panics, stack corruption, virtual memory
> failures, OneNAND DMA timeouts etc. on a dm3730 with 1GHz speed grade.
>
I #if 0'ed the 1Ghz opp and found out that the OneNAND DMA timeouts
are independant of 1Ghz. But the result is interesting:
With this patch
xxd /dev/mtd0 shows only ff
without this patch gives content, it is slower.
In both cases I see
[ 476.533477] omap2-onenand 4000000.onenand: timeout waiting for DMA

Regards,
Andreas

\
 
 \ /
  Last update: 2019-12-02 23:17    [W:0.039 / U:5.988 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site