lkml.org 
[lkml]   [2019]   [Dec]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v8 1/2] dt-bindings: display/bridge: Add binding for NWL mipi dsi host controller
Date
The Northwest Logic MIPI DSI IP core can be found in NXPs i.MX8 SoCs.

Signed-off-by: Guido Günther <agx@sigxcpu.org>
Tested-by: Robert Chiras <robert.chiras@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
.../bindings/display/bridge/nwl-dsi.yaml | 203 ++++++++++++++++++
1 file changed, 203 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml

diff --git a/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml
new file mode 100644
index 000000000000..8cbecd53c1ac
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml
@@ -0,0 +1,203 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/nwl-dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Northwest Logic MIPI-DSI controller on i.MX SoCs
+
+maintainers:
+ - Guido Gúnther <agx@sigxcpu.org>
+ - Robert Chiras <robert.chiras@nxp.com>
+
+description: |
+ NWL MIPI-DSI host controller found on i.MX8 platforms. This is a dsi bridge for
+ the SOCs NWL MIPI-DSI host controller.
+
+properties:
+ compatible:
+ const: fsl,imx8mq-nwl-dsi
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+ clocks:
+ items:
+ - description: DSI core clock
+ - description: RX_ESC clock (used in escape mode)
+ - description: TX_ESC clock (used in escape mode)
+ - description: PHY_REF clock
+
+ clock-names:
+ items:
+ - const: core
+ - const: rx_esc
+ - const: tx_esc
+ - const: phy_ref
+
+ mux-controls:
+ description:
+ mux controller node to use for operating the input mux
+
+ phys:
+ maxItems: 1
+ description:
+ A phandle to the phy module representing the DPHY
+
+ phy-names:
+ items:
+ - const: dphy
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ items:
+ - description: dsi byte reset line
+ - description: dsi dpi reset line
+ - description: dsi esc reset line
+ - description: dsi pclk reset line
+
+ reset-names:
+ items:
+ - const: byte
+ - const: dpi
+ - const: esc
+ - const: pclk
+
+ ports:
+ type: object
+ description:
+ A node containing DSI input & output port nodes with endpoint
+ definitions as documented in
+ Documentation/devicetree/bindings/graph.txt.
+ properties:
+ port@0:
+ type: object
+ description:
+ Input port node to receive pixel data from the
+ display controller. Exactly one endpoint must be
+ specified.
+ properties:
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+ endpoint@0:
+ description: sub-node describing the input from LCDIF
+ type: object
+
+ endpoint@1:
+ description: sub-node describing the input from DCSS
+ type: object
+
+ reg:
+ const: 0
+
+ required:
+ - '#address-cells'
+ - '#size-cells'
+ - reg
+ additionalProperties: false
+
+ port@1:
+ type: object
+ description:
+ DSI output port node to the panel or the next bridge
+ in the chain
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+ required:
+ - '#address-cells'
+ - '#size-cells'
+ - port@0
+ - port@1
+
+ additionalProperties: false
+
+patternProperties:
+ "^panel@[0-9]+$":
+ type: object
+
+required:
+ - '#address-cells'
+ - '#size-cells'
+ - clock-names
+ - clocks
+ - compatible
+ - interrupts
+ - mux-controls
+ - phy-names
+ - phys
+ - ports
+ - reg
+ - reset-names
+ - resets
+
+additionalProperties: false
+
+examples:
+ - |
+
+ mipi_dsi: mipi_dsi@30a00000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx8mq-nwl-dsi";
+ reg = <0x30A00000 0x300>;
+ clocks = <&clk 163>, <&clk 244>, <&clk 245>, <&clk 164>;
+ clock-names = "core", "rx_esc", "tx_esc", "phy_ref";
+ interrupts = <0 34 4>;
+ mux-controls = <&mux 0>;
+ power-domains = <&pgc_mipi>;
+ resets = <&src 0>, <&src 1>, <&src 2>, <&src 3>;
+ reset-names = "byte", "dpi", "esc", "pclk";
+ phys = <&dphy>;
+ phy-names = "dphy";
+
+ panel@0 {
+ compatible = "rocktech,jh057n00900";
+ reg = <0>;
+ port@0 {
+ panel_in: endpoint {
+ remote-endpoint = <&mipi_dsi_out>;
+ };
+ };
+ };
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ #size-cells = <0>;
+ #address-cells = <1>;
+ reg = <0>;
+ mipi_dsi_in: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&lcdif_mipi_dsi>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ mipi_dsi_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+ };
--
2.23.0
\
 
 \ /
  Last update: 2019-12-02 20:36    [W:0.073 / U:10.240 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site