lkml.org 
[lkml]   [2019]   [Dec]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 1/3] arm64: dts: allwinner: a64: olinuxino: Fix eMMC supply regulator
On Fri, Nov 29, 2019 at 01:39:39PM +0200, Stefan Mavrodiev wrote:
> A64-OLinuXino-eMMC uses 1.8V for eMMC supply. This is done via a triple
> jumper, which sets VCC-PL to either 1.8V or 3.3V. This setting is different
> for boards with and without eMMC.
>
> This is not a big issue for DDR52 mode, however the eMMC will not work in
> HS200/HS400, since these modes explicitly requires 1.8V.
>
> Fixes: 94f68f3a4b2a ("arm64: dts: allwinner: a64: Add A64 OlinuXino board (with eMMC)")
> Cc: stable@vger.kernel.org # v5.4
> Signed-off-by: Stefan Mavrodiev <stefan@olimex.com>

Applied, thanks!
Maxime
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2019-12-02 20:14    [W:0.034 / U:3.436 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site