lkml.org 
[lkml]   [2019]   [Dec]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 1/2] dt-bindings: power: reset: xilinx: Add bindings for ipi mailbox
Date
Add IPI mailbox property and its example in xilinx zynqmp-power
documentation.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
---
Changes in v2:
- Correct order of tx and rx in mbox-names property.
- Add interrupts property in example.
---
.../bindings/power/reset/xlnx,zynqmp-power.txt | 43 ++++++++++++++++++++--
1 file changed, 40 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt b/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt
index d366f1e..0d74987 100644
--- a/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt
+++ b/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt
@@ -8,18 +8,55 @@ Required properties:
- compatible: Must contain: "xlnx,zynqmp-power"
- interrupts: Interrupt specifier

--------
-Example
--------
+Optional properties:
+ - mbox-names : Name given to channels seen in the 'mboxes' property.
+ "tx" - Mailbox corresponding to transmit path
+ "rx" - Mailbox corresponding to receive path
+ - mboxes : Standard property to specify a Mailbox. Each value of
+ the mboxes property should contain a phandle to the
+ mailbox controller device node and an args specifier
+ that will be the phandle to the intended sub-mailbox
+ child node to be used for communication. See
+ Documentation/devicetree/bindings/mailbox/mailbox.txt
+ for more details about the generic mailbox controller
+ and client driver bindings. Also see
+ Documentation/devicetree/bindings/mailbox/ \
+ xlnx,zynqmp-ipi-mailbox.txt for typical controller that
+ is used to communicate with this System controllers.
+
+--------
+Examples
+--------
+
+Example with interrupt method:
+
+firmware {
+ zynqmp_firmware: zynqmp-firmware {
+ compatible = "xlnx,zynqmp-firmware";
+ method = "smc";
+
+ zynqmp_power: zynqmp-power {
+ compatible = "xlnx,zynqmp-power";
+ interrupts = <0 35 4>;
+ };
+ };
+};
+
+Example with IPI mailbox method:

firmware {
+
zynqmp_firmware: zynqmp-firmware {
compatible = "xlnx,zynqmp-firmware";
method = "smc";

zynqmp_power: zynqmp-power {
compatible = "xlnx,zynqmp-power";
+ interrupt-parent = <&gic>;
interrupts = <0 35 4>;
+ mboxes = <&ipi_mailbox_pmu0 0>,
+ <&ipi_mailbox_pmu0 1>;
+ mbox-names = "tx", "rx";
};
};
};
--
2.7.4
\
 
 \ /
  Last update: 2019-12-02 11:40    [W:0.049 / U:2.036 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site