lkml.org 
[lkml]   [2019]   [Dec]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.4 08/80] PCI: pciehp: Avoid returning prematurely from sysfs requests
Date
From: Lukas Wunner <lukas@wunner.de>

commit 157c1062fcd86ade3c674503705033051fd3d401 upstream.

A sysfs request to enable or disable a PCIe hotplug slot should not
return before it has been carried out. That is sought to be achieved by
waiting until the controller's "pending_events" have been cleared.

However the IRQ thread pciehp_ist() clears the "pending_events" before
it acts on them. If pciehp_sysfs_enable_slot() / _disable_slot() happen
to check the "pending_events" after they have been cleared but while
pciehp_ist() is still running, the functions may return prematurely
with an incorrect return value.

Fix by introducing an "ist_running" flag which must be false before a sysfs
request is allowed to return.

Fixes: 32a8cef274fe ("PCI: pciehp: Enable/disable exclusively from IRQ thread")
Link: https://lore.kernel.org/linux-pci/1562226638-54134-1-git-send-email-wangxiongfeng2@huawei.com
Link: https://lore.kernel.org/r/4174210466e27eb7e2243dd1d801d5f75baaffd8.1565345211.git.lukas@wunner.de
Reported-and-tested-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/pci/hotplug/pciehp.h | 2 ++
drivers/pci/hotplug/pciehp_ctrl.c | 6 ++++--
drivers/pci/hotplug/pciehp_hpc.c | 2 ++
3 files changed, 8 insertions(+), 2 deletions(-)

--- a/drivers/pci/hotplug/pciehp.h
+++ b/drivers/pci/hotplug/pciehp.h
@@ -72,6 +72,7 @@ extern int pciehp_poll_time;
* @reset_lock: prevents access to the Data Link Layer Link Active bit in the
* Link Status register and to the Presence Detect State bit in the Slot
* Status register during a slot reset which may cause them to flap
+ * @ist_running: flag to keep user request waiting while IRQ thread is running
* @request_result: result of last user request submitted to the IRQ thread
* @requester: wait queue to wake up on completion of user request,
* used for synchronous slot enable/disable request via sysfs
@@ -101,6 +102,7 @@ struct controller {

struct hotplug_slot hotplug_slot; /* hotplug core interface */
struct rw_semaphore reset_lock;
+ unsigned int ist_running;
int request_result;
wait_queue_head_t requester;
};
--- a/drivers/pci/hotplug/pciehp_ctrl.c
+++ b/drivers/pci/hotplug/pciehp_ctrl.c
@@ -375,7 +375,8 @@ int pciehp_sysfs_enable_slot(struct hotp
ctrl->request_result = -ENODEV;
pciehp_request(ctrl, PCI_EXP_SLTSTA_PDC);
wait_event(ctrl->requester,
- !atomic_read(&ctrl->pending_events));
+ !atomic_read(&ctrl->pending_events) &&
+ !ctrl->ist_running);
return ctrl->request_result;
case POWERON_STATE:
ctrl_info(ctrl, "Slot(%s): Already in powering on state\n",
@@ -408,7 +409,8 @@ int pciehp_sysfs_disable_slot(struct hot
mutex_unlock(&ctrl->state_lock);
pciehp_request(ctrl, DISABLE_SLOT);
wait_event(ctrl->requester,
- !atomic_read(&ctrl->pending_events));
+ !atomic_read(&ctrl->pending_events) &&
+ !ctrl->ist_running);
return ctrl->request_result;
case POWEROFF_STATE:
ctrl_info(ctrl, "Slot(%s): Already in powering off state\n",
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -583,6 +583,7 @@ static irqreturn_t pciehp_ist(int irq, v
irqreturn_t ret;
u32 events;

+ ctrl->ist_running = true;
pci_config_pm_runtime_get(pdev);

/* rerun pciehp_isr() if the port was inaccessible on interrupt */
@@ -629,6 +630,7 @@ static irqreturn_t pciehp_ist(int irq, v
up_read(&ctrl->reset_lock);

pci_config_pm_runtime_put(pdev);
+ ctrl->ist_running = false;
wake_up(&ctrl->requester);
return IRQ_HANDLED;
}

\
 
 \ /
  Last update: 2019-12-19 19:55    [W:0.312 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site