lkml.org 
[lkml]   [2019]   [Dec]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 05/13] PCI: cadence: Add read and write accessors to perform only 32-bit accesses
From
Date
Hi Andrew,

On 16/12/19 8:19 pm, Andrew Murray wrote:
> On Mon, Dec 09, 2019 at 02:51:39PM +0530, Kishon Vijay Abraham I wrote:
>> Certain platforms like TI's J721E allow only 32-bit register accesses.
>
> When I first read this I thought you meant only 32-bit accesses are allowed
> and not other sizes (such as 64-bit). However the limitation you address
> here is that the J721E allows only 32-bit *aligned* register accesses.

It's both, it allows only 32-bit aligned accesses and the size should be
only 32 bits. That's why I always use "readl" in the APIs below.
>
> It would be helpful to make this clearer in the commit message.
>
> You can also shorten the commit subject to 'PCI: cadence: Add read/write
> accessors for 32-bit aligned accesses' or similar.
>
>> Add read and write accessors to perform only 32-bit accesses in order to
>> support platfroms like TI's J721E.
>>
>> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
>> ---
>> drivers/pci/controller/cadence/pcie-cadence.c | 40 +++++++++++++++++++
>> drivers/pci/controller/cadence/pcie-cadence.h | 2 +
>> 2 files changed, 42 insertions(+)
>>
>> diff --git a/drivers/pci/controller/cadence/pcie-cadence.c b/drivers/pci/controller/cadence/pcie-cadence.c
>> index cd795f6fc1e2..de5b3b06f2d0 100644
>> --- a/drivers/pci/controller/cadence/pcie-cadence.c
>> +++ b/drivers/pci/controller/cadence/pcie-cadence.c
>> @@ -7,6 +7,46 @@
>>
>> #include "pcie-cadence.h"
>>
>> +u32 cdns_pcie_read32(void __iomem *addr, int size)
>
> Given there is already a cdns_pcie_readl in pcie-cadence.h it may help
> to name this in a way that doesn't cause confusion. Here 32 is perhaps
> being used to suggest the size of the actual read performed, the
> maximum size of 'size' or the alignment.
>
>
>> +{
>> + void __iomem *aligned_addr = PTR_ALIGN_DOWN(addr, 0x4);
>> + unsigned int offset = (unsigned long)addr & 0x3;
>> + u32 val = readl(aligned_addr);
>> +
>> + if (!IS_ALIGNED((uintptr_t)addr, size)) {
>> + pr_err("Invalid Address in function:%s\n", __func__);
>
> Would this be better as a BUG? Without a BUG this error could get ignored
> and yet the device may not behave as expected.

yeah.
>
>
>> + return 0;
>> + }
>> +
>> + if (size > 2)
>> + return val;
>
> I think you make the assumption here that if size > 2 then it's 4. It could
> be 3 (though unlikely) in which case you'd want to fall through to the next
> line.

This assumption is used elsewhere too (e.g drivers/pci/access.c). I
generally don't prefer adding handlers for non-occurring error
scenarios, but If you insist I can fix that.

Thanks
Kishon

\
 
 \ /
  Last update: 2019-12-19 12:55    [W:1.275 / U:0.320 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site