lkml.org 
[lkml]   [2019]   [Dec]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/4] phy: qcom-qmp: Use register defines
On 2019-12-19 23:04, Vinod Koul wrote:
> We already define register offsets so use them in register layout.
>
> Signed-off-by: Vinod Koul <vkoul@kernel.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c
> b/drivers/phy/qualcomm/phy-qcom-qmp.c
> index c2e800a3825a..06f971ca518e 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
> @@ -166,8 +166,8 @@ static const unsigned int
> sdm845_ufsphy_regs_layout[] = {
> };
>
> static const unsigned int sm8150_ufsphy_regs_layout[] = {
> - [QPHY_START_CTRL] = 0x00,
> - [QPHY_PCS_READY_STATUS] = 0x180,
> + [QPHY_START_CTRL] = QPHY_V4_PHY_START,
> + [QPHY_SW_RESET] = QPHY_V4_SW_RESET,
> };
>
> static const struct qmp_phy_init_tbl msm8996_pcie_serdes_tbl[] = {

Why is the QPHY_PCS_READY_STATUS removed here? Then what "status" are we
polling here for UFS PHY?

<snip>
if (cfg->type == PHY_TYPE_UFS) {
status = pcs + cfg->regs[QPHY_PCS_READY_STATUS];
mask = PCS_READY;
ready = PCS_READY;
} else {
<snip>

Can Guo.

\
 
 \ /
  Last update: 2019-12-20 01:45    [W:0.107 / U:0.548 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site