lkml.org 
[lkml]   [2019]   [Dec]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.19 11/47] net/mlx5e: Query global pause state before setting prio2buffer
Date
From: Huy Nguyen <huyn@mellanox.com>

[ Upstream commit 73e6551699a32fac703ceea09214d6580edcf2d5 ]

When the user changes prio2buffer mapping while global pause is
enabled, mlx5 driver incorrectly sets all active buffers
(buffer that has at least one priority mapped) to lossy.

Solution:
If global pause is enabled, set all the active buffers to lossless
in prio2buffer command.
Also, add error message when buffer size is not enough to meet
xoff threshold.

Fixes: 0696d60853d5 ("net/mlx5e: Receive buffer configuration")
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/mellanox/mlx5/core/en/port_buffer.c | 27 +++++++++++++--
1 file changed, 25 insertions(+), 2 deletions(-)

--- a/drivers/net/ethernet/mellanox/mlx5/core/en/port_buffer.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/port_buffer.c
@@ -155,8 +155,11 @@ static int update_xoff_threshold(struct
}

if (port_buffer->buffer[i].size <
- (xoff + max_mtu + (1 << MLX5E_BUFFER_CELL_SHIFT)))
+ (xoff + max_mtu + (1 << MLX5E_BUFFER_CELL_SHIFT))) {
+ pr_err("buffer_size[%d]=%d is not enough for lossless buffer\n",
+ i, port_buffer->buffer[i].size);
return -ENOMEM;
+ }

port_buffer->buffer[i].xoff = port_buffer->buffer[i].size - xoff;
port_buffer->buffer[i].xon =
@@ -232,6 +235,26 @@ static int update_buffer_lossy(unsigned
return 0;
}

+static int fill_pfc_en(struct mlx5_core_dev *mdev, u8 *pfc_en)
+{
+ u32 g_rx_pause, g_tx_pause;
+ int err;
+
+ err = mlx5_query_port_pause(mdev, &g_rx_pause, &g_tx_pause);
+ if (err)
+ return err;
+
+ /* If global pause enabled, set all active buffers to lossless.
+ * Otherwise, check PFC setting.
+ */
+ if (g_rx_pause || g_tx_pause)
+ *pfc_en = 0xff;
+ else
+ err = mlx5_query_port_pfc(mdev, pfc_en, NULL);
+
+ return err;
+}
+
#define MINIMUM_MAX_MTU 9216
int mlx5e_port_manual_buffer_config(struct mlx5e_priv *priv,
u32 change, unsigned int mtu,
@@ -277,7 +300,7 @@ int mlx5e_port_manual_buffer_config(stru

if (change & MLX5E_PORT_BUFFER_PRIO2BUFFER) {
update_prio2buffer = true;
- err = mlx5_query_port_pfc(priv->mdev, &curr_pfc_en, NULL);
+ err = fill_pfc_en(priv->mdev, &curr_pfc_en);
if (err)
return err;


\
 
 \ /
  Last update: 2019-12-19 20:01    [W:0.205 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site