lkml.org 
[lkml]   [2019]   [Dec]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V2] arm: dts: imx7ulp: fix reg of cpu node
Date
From: Peng Fan <peng.fan@nxp.com>

According to arm cpus binding doc,
"
On 32-bit ARM v7 or later systems this property is
required and matches the CPU MPIDR[23:0] register
bits.

Bits [23:0] in the reg cell must be set to
bits [23:0] in MPIDR.

All other bits in the reg cell must be set to 0.
"

In i.MX7ULP, the MPIDR[23:0] is 0xf00, not 0, so fix it.
Otherwise there will be warning:
"DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map"

Fixes: 20434dc92c05 ("ARM: dts: imx: add common imx7ulp dtsi support")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---

V2:
Fix suffix, from 0 -> f00

arch/arm/boot/dts/imx7ulp.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx7ulp.dtsi b/arch/arm/boot/dts/imx7ulp.dtsi
index d37a1927c88e..ab91c98f2124 100644
--- a/arch/arm/boot/dts/imx7ulp.dtsi
+++ b/arch/arm/boot/dts/imx7ulp.dtsi
@@ -37,10 +37,10 @@
#address-cells = <1>;
#size-cells = <0>;

- cpu0: cpu@0 {
+ cpu0: cpu@f00 {
compatible = "arm,cortex-a7";
device_type = "cpu";
- reg = <0>;
+ reg = <0xf00>;
};
};

--
2.16.4
\
 
 \ /
  Last update: 2019-12-18 13:22    [W:0.117 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site