lkml.org 
[lkml]   [2019]   [Dec]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] hwmon: Driver for temperature sensors on SATA drives
On Wed, Dec 18, 2019 at 07:15:07PM -0500, Martin K. Petersen wrote:
>
> Guenter,
>
> > This driver solves this problem by adding support for reading the
> > temperature of SATA drives from the kernel using the hwmon API and
> > by adding a temperature zone for each drive.
>
> My working tree is available here:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/mkp/linux.git/log/?h=5.6/drivetemp
>
> A few notes:
>
> - Before applying your patch I did s/satatemp/drivetemp/
>
> - I get a crash in the driver core during probe if the drivetemp module
> is loaded prior to loading ahci or a SCSI HBA driver. This crash is
> unrelated to my changes. Haven't had time to debug.
>
> - I tweaked your ATA detection heuristics and now use the cached VPD
> page 0x89 instead of fetching one from the device.
>
> - I also added support for reading the temperature log page on SCSI
> drives.
>
> - Tested with a mixed bag of about 40 SCSI and SATA drives attached.
>
> - I still think sensor naming needs work. How and where are the
> "drivetemp-scsi-8-140" names generated?
>
Quick one: In libsensors, outside the kernel. The naming is generic,
along the line of <driver name>-<bus name>-<bus index>-<slot>.

> I'll tinker some more but thought I'd share what I have for now.
>
Thanks for sharing. I'll be out on vacation until January 1. I'll look
at the code after I am back.

Guenter

> --
> Martin K. Petersen Oracle Linux Engineering

\
 
 \ /
  Last update: 2019-12-19 01:33    [W:0.129 / U:17.472 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site