lkml.org 
[lkml]   [2019]   [Dec]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 09/13] dt-bindings: PCI: Add host mode dt-bindings for TI's J721E SoC
On Mon, Dec 09, 2019 at 02:51:43PM +0530, Kishon Vijay Abraham I wrote:
> Add host mode dt-bindings for TI's J721E SoC.
>
> Cc: Rob Herring <robh+dt@kernel.org>
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> ---
> .../bindings/pci/ti,j721e-pci-host.yaml | 161 ++++++++++++++++++
> 1 file changed, 161 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
>
> diff --git a/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
> new file mode 100644
> index 000000000000..96184e1f419f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
> @@ -0,0 +1,161 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/pci/ti,j721e-pci-host.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: TI J721E PCI Host (PCIe Wrapper)
> +
> +maintainers:
> + - Kishon Vijay Abraham I <kishon@ti.com>

There's now a PCI bus schema. Reference it here:

allOf:
- $ref: "/schemas/pci/pci-bus.yaml#"

> +
> +properties:
> + compatible:
> + enum:
> + - ti,j721e-pcie-host

Indentation.

> +
> + reg:
> + maxItems: 4
> +
> + reg-names:
> + items:
> + - const: intd_cfg
> + - const: user_cfg
> + - const: reg
> + - const: cfg
> +
> + ti,syscon-pcie-ctrl:
> + description: Phandle to the SYSCON entry required for configuring PCIe mode
> + and link speed.
> + allOf:
> + - $ref: /schemas/types.yaml#/definitions/phandle

You can drop the 'allOf' here if there aren't more constraints.

> +
> + max-link-speed:
> + minimum: 1
> + maximum: 3
> +
> + num-lanes:
> + minimum: 1
> + maximum: 2
> +
> + power-domains:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 1
> + description: clock-specifier to represent input to the PCIe
> +
> + clock-names:
> + items:
> + - const: fck
> +

> + "#address-cells":
> + const: 3
> +
> + "#size-cells":
> + const: 2
> +
> + bus-range:
> + description: Range of bus numbers associated with this controller.

Drop these 3 as they are all standard.

> +
> + cdns,max-outbound-regions:
> + description: As defined in
> + Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
> + allOf:
> + - $ref: /schemas/types.yaml#/definitions/int32

Can be negative? Use uint32.

The int* definitions are kind of broken until dtc is fixed to maintain
sign.

> + - enum: [16]

const: 16

> +
> + cdns,no-bar-match-nbits:
> + description: As defined in
> + Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
> + allOf:
> + - $ref: /schemas/types.yaml#/definitions/int32
> + - enum: [64]
> +
> + vendor-id:
> + const: 0x104c
> + description: As defined in
> + Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt

And elsewhere. Drop the description.

> +
> + device-id:
> + const: 0xb00d
> + description: As defined in
> + Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
> +
> + msi-map: true
> +
> + dma-coherent:
> + description: Indicates that the PCIe IP block can ensure the coherency
> +
> + ranges: true

Don't you know how many?

> +
> + reset-gpios:
> + description: GPIO specifier for the PERST# signal
> +
> + phys:
> + description: As defined in
> + Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
> +
> + phy-names:
> + description: As defined in
> + Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
> +
> +required:
> + - compatible
> + - reg
> + - reg-names
> + - ti,syscon-pcie-ctrl
> + - max-link-speed
> + - num-lanes
> + - power-domains
> + - clocks
> + - clock-names

> + - "#address-cells"
> + - "#size-cells"

Can drop these 2. The bus schema requires them.

> + - bus-range
> + - cdns,max-outbound-regions
> + - cdns,no-bar-match-nbits
> + - vendor-id
> + - device-id
> + - msi-map
> + - dma-coherent
> + - ranges

Can drop, too.

> + - reset-gpios

Isn't having this board dependent?

> + - phys
> + - phy-names
> +
> +examples:
> + - |
> + #include <dt-bindings/soc/ti,sci_pm_domain.h>
> + #include <dt-bindings/gpio/gpio.h>
> +
> +
> + pcie0_rc: pcie@2900000 {
> + compatible = "ti,j721e-pcie-host";
> + reg = <0x00 0x02900000 0x00 0x1000>,
> + <0x00 0x02907000 0x00 0x400>,
> + <0x00 0x0d000000 0x00 0x00800000>,
> + <0x00 0x10000000 0x00 0x00001000>;
> + reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
> + ti,syscon-pcie-ctrl = <&pcie0_ctrl>;
> + max-link-speed = <3>;
> + num-lanes = <2>;
> + power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>;
> + clocks = <&k3_clks 239 1>;
> + clock-names = "fck";
> + #address-cells = <3>;
> + #size-cells = <2>;
> + bus-range = <0x0 0xf>;
> + cdns,max-outbound-regions = <16>;
> + cdns,no-bar-match-nbits = <64>;
> + vendor-id = /bits/ 16 <0x104c>;
> + device-id = /bits/ 16 <0xb00d>;
> + msi-map = <0x0 &gic_its 0x0 0x10000>;
> + dma-coherent;
> + reset-gpios = <&exp1 6 GPIO_ACTIVE_HIGH>;
> + phys = <&serdes0_pcie_link>;
> + phy-names = "pcie_phy";
> + ranges = <0x01000000 0x0 0x10001000 0x00 0x10001000 0x0 0x0010000>,
> + <0x02000000 0x0 0x10011000 0x00 0x10011000 0x0 0x7fef000>;
> + };
> --
> 2.17.1
>

\
 
 \ /
  Last update: 2019-12-19 01:09    [W:0.203 / U:1.444 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site