lkml.org 
[lkml]   [2019]   [Dec]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 13/14] dt-bindings: phy: Document WIZ (SERDES wrapper) bindings
On Mon, Dec 16, 2019 at 03:27:11PM +0530, Kishon Vijay Abraham I wrote:
> Add DT binding documentation for WIZ (SERDES wrapper). WIZ is *NOT* a
> PHY but a wrapper used to configure some of the input signals to the
> SERDES. It is used with both Sierra(16G) and Torrent(10G) serdes.
>
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> [jsarha@ti.com: Add separate compatible for Sierra(16G) and Torrent(10G)
> SERDES]
> Signed-off-by: Jyri Sarha <jsarha@ti.com>
> ---
> .../bindings/phy/ti,phy-j721e-wiz.yaml | 204 ++++++++++++++++++
> 1 file changed, 204 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
>
> diff --git a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
> new file mode 100644
> index 000000000000..fd4204a960a9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
> @@ -0,0 +1,204 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/phy/ti,phy-j721e-wiz.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: TI J721E WIZ (SERDES Wrapper)
> +
> +maintainers:
> + - Kishon Vijay Abraham I <kishon@ti.com>
> +
> +properties:
> + compatible:
> + enum:
> + - ti,j721e-wiz-16g
> + - ti,j721e-wiz-10g

Tab size is 2 spaces.

> +
> + power-domains:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 3
> + description: clock-specifier to represent input to the WIZ
> +
> + clock-names:
> + items:
> + - const: fck
> + - const: core_ref_clk
> + - const: ext_ref_clk
> +
> + num-lanes:
> + minimum: 1
> + maximum: 4
> +
> + "#address-cells":
> + const: 1
> +
> + "#size-cells":
> + const: 1
> +
> + "#reset-cells":
> + const: 1
> +
> + ranges: true
> +
> + assigned-clocks:
> + maxItems: 2
> +
> + assigned-clock-parents:
> + maxItems: 2
> +
> +patternProperties:
> + "^pll[0|1]-refclk$":

Indentation

> + type: object
> + description: |

Don't need the '|' unless there's formatting or multiple paragraphs.

> + WIZ node should have subnodes for each of the PLLs present in
> + the SERDES.
> + properties:
> + clocks:
> + maxItems: 2
> + description: Phandle to clock nodes representing the two inputs to PLL.
> +
> + "#clock-cells":
> + const: 0
> +
> + assigned-clocks:
> + maxItems: 1
> +
> + assigned-clock-parents:
> + maxItems: 1
> +
> + required:
> + - clocks
> + - "#clock-cells"
> + - assigned-clocks
> + - assigned-clock-parents
> +
> + "^cmn-refclk1?-dig-div$":

Indentation

> + type: object
> + description: |
> + WIZ node should have subnodes for each of the PMA common refclock
> + provided by the SERDES.
> + properties:
> + clocks:
> + maxItems: 1
> + description: Phandle to the clock node representing the input to the
> + divider clock.
> +
> + "#clock-cells":
> + const: 0
> +
> + required:
> + - clocks
> + - "#clock-cells"
> +
> + "^refclk-dig$":

Indentation

> + type: object
> + description: |
> + WIZ node should have subnode for refclk_dig to select the reference
> + clock source for the reference clock used in the PHY and PMA digital
> + logic.
> + properties:
> + clocks:
> + maxItems: 4
> + description: Phandle to four clock nodes representing the inputs to
> + refclk_dig
> +
> + "#clock-cells":
> + const: 0
> +
> + assigned-clocks:
> + maxItems: 1
> +
> + assigned-clock-parents:
> + maxItems: 1
> +
> + required:
> + - clocks
> + - "#clock-cells"
> + - assigned-clocks
> + - assigned-clock-parents
> +
> + "^serdes@[0-9a-f]+$":

...

> + type: object
> + description: |
> + WIZ node should have '1' subnode for the SERDES. It could be either
> + Sierra SERDES or Torrent SERDES. Sierra SERDES should follow the
> + bindings specified in
> + Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt
> + Torrent SERDES should follow the bindings specified in
> + Documentation/devicetree/bindings/phy/phy-cadence-dp.txt
> +
> +required:
> + - compatible
> + - power-domains
> + - clocks
> + - clock-names
> + - num-lanes
> + - "#address-cells"
> + - "#size-cells"
> + - "#reset-cells"
> + - ranges
> +
> +examples:
> + - |
> + #include <dt-bindings/soc/ti,sci_pm_domain.h>
> +
> + wiz@5000000 {
> + compatible = "ti,j721e-wiz-16g";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + power-domains = <&k3_pds 292 TI_SCI_PD_EXCLUSIVE>;
> + clocks = <&k3_clks 292 5>, <&k3_clks 292 11>, <&dummy_cmn_refclk>;
> + clock-names = "fck", "core_ref_clk", "ext_ref_clk";
> + assigned-clocks = <&k3_clks 292 11>, <&k3_clks 292 0>;
> + assigned-clock-parents = <&k3_clks 292 15>, <&k3_clks 292 4>;
> + num-lanes = <2>;
> + #reset-cells = <1>;
> + ranges = <0x5000000 0x0 0x5000000 0x10000>;
> +
> + pll0-refclk {
> + clocks = <&k3_clks 293 13>, <&dummy_cmn_refclk>;
> + #clock-cells = <0>;
> + assigned-clocks = <&wiz1_pll0_refclk>;
> + assigned-clock-parents = <&k3_clks 293 13>;
> + };
> +
> + pll1-refclk {
> + clocks = <&k3_clks 293 0>, <&dummy_cmn_refclk1>;
> + #clock-cells = <0>;
> + assigned-clocks = <&wiz1_pll1_refclk>;
> + assigned-clock-parents = <&k3_clks 293 0>;
> + };
> +
> + cmn-refclk-dig-div {
> + clocks = <&wiz1_refclk_dig>;
> + #clock-cells = <0>;
> + };
> +
> + cmn-refclk1-dig-div {
> + clocks = <&wiz1_pll1_refclk>;
> + #clock-cells = <0>;
> + };
> +
> + refclk-dig {
> + clocks = <&k3_clks 292 11>, <&k3_clks 292 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>;
> + #clock-cells = <0>;
> + assigned-clocks = <&wiz0_refclk_dig>;
> + assigned-clock-parents = <&k3_clks 292 11>;
> + };
> +
> + serdes@5000000 {
> + compatible = "cdns,ti,sierra-phy-t0";
> + reg-names = "serdes";
> + reg = <0x5000000 0x10000>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + resets = <&serdes_wiz0 0>;
> + reset-names = "sierra_reset";
> + clocks = <&wiz0_cmn_refclk_dig_div>, <&wiz0_cmn_refclk1_dig_div>;
> + clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div";
> + };
> + };
> --
> 2.17.1
>

\
 
 \ /
  Last update: 2019-12-18 22:01    [W:0.159 / U:0.368 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site