lkml.org 
[lkml]   [2019]   [Dec]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 2/2] I2C: JZ4780: Add support for the X1000.
From
Date
Hi Paul,

On 2019年12月16日 21:57, Paul Cercueil wrote:
> Hi Zhou,
>
>
> Le lun., déc. 16, 2019 at 18:06, 周琰杰 (Zhou Yanjie)
> <zhouyanjie@wanyeetech.com> a écrit :
>> Add support for probing i2c driver on the X1000 Soc from Ingenic.
>> call the corresponding fifo parameter according to the device
>> model obtained from the devicetree.
>>
>> Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
>> ---
>>
>> Notes:
>> v1->v2:
>> Add code to check device_get_match_data(), if it return a NULL ptr,
>> then print an error message and return -ENODEV.
>>
>> drivers/i2c/busses/i2c-jz4780.c | 155
>> +++++++++++++++++++++++++++++-----------
>> 1 file changed, 115 insertions(+), 40 deletions(-)
>>
>> diff --git a/drivers/i2c/busses/i2c-jz4780.c
>> b/drivers/i2c/busses/i2c-jz4780.c
>> index 25dcd73..f07a07c 100644
>> --- a/drivers/i2c/busses/i2c-jz4780.c
>> +++ b/drivers/i2c/busses/i2c-jz4780.c
>> @@ -4,6 +4,7 @@
>> *
>> * Copyright (C) 2006 - 2009 Ingenic Semiconductor Inc.
>> * Copyright (C) 2015 Imagination Technologies
>> + * Copyright (C) 2019 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
>> */
>>
>> #include <linux/bitops.h>
>> @@ -17,6 +18,7 @@
>> #include <linux/io.h>
>> #include <linux/kernel.h>
>> #include <linux/module.h>
>> +#include <linux/of_device.h>
>> #include <linux/platform_device.h>
>> #include <linux/sched.h>
>> #include <linux/slab.h>
>> @@ -55,6 +57,7 @@
>> #define JZ4780_I2C_ACKGC 0x98
>> #define JZ4780_I2C_ENSTA 0x9C
>> #define JZ4780_I2C_SDAHD 0xD0
>> +#define X1000_I2C_SDAHD 0x7C
>>
>> #define JZ4780_I2C_CTRL_STPHLD BIT(7)
>> #define JZ4780_I2C_CTRL_SLVDIS BIT(6)
>> @@ -73,6 +76,8 @@
>> #define JZ4780_I2C_STA_TFNF BIT(1)
>> #define JZ4780_I2C_STA_ACT BIT(0)
>>
>> +#define X1000_I2C_DC_STOP BIT(9)
>> +
>> static const char * const jz4780_i2c_abrt_src[] = {
>> "ABRT_7B_ADDR_NOACK",
>> "ABRT_10ADDR1_NOACK",
>> @@ -130,18 +135,33 @@ static const char * const jz4780_i2c_abrt_src[]
>> = {
>> #define JZ4780_I2CFLCNT_ADJUST(n) (((n) - 1) < 8 ? 8 : ((n) - 1))
>>
>> #define JZ4780_I2C_FIFO_LEN 16
>> -#define TX_LEVEL 3
>> -#define RX_LEVEL (JZ4780_I2C_FIFO_LEN - TX_LEVEL - 1)
>> +
>> +#define X1000_I2C_FIFO_LEN 64
>>
>> #define JZ4780_I2C_TIMEOUT 300
>>
>> #define BUFSIZE 200
>>
>> +enum ingenic_i2c_version {
>> + ID_JZ4780,
>> + ID_X1000,
>> +};
>> +
>> +/* ingenic_i2c_config: SoC specific config data. */
>> +struct ingenic_i2c_config {
>> + enum ingenic_i2c_version version;
>> +
>> + int fifosize;
>> + int tx_level;
>> + int rx_level;
>> +};
>> +
>> struct jz4780_i2c {
>> void __iomem *iomem;
>> int irq;
>> struct clk *clk;
>> struct i2c_adapter adap;
>> + const struct ingenic_i2c_config *cdata;
>>
>> /* lock to protect rbuf and wbuf between xfer_rd/wr and irq
>> handler */
>> spinlock_t lock;
>> @@ -340,11 +360,18 @@ static int jz4780_i2c_set_speed(struct
>> jz4780_i2c *i2c)
>>
>> if (hold_time >= 0) {
>> /*i2c hold time enable */
>> - hold_time |= JZ4780_I2C_SDAHD_HDENB;
>> - jz4780_i2c_writew(i2c, JZ4780_I2C_SDAHD, hold_time);
>> + if (i2c->cdata->version >= ID_X1000)
>> + jz4780_i2c_writew(i2c, X1000_I2C_SDAHD, hold_time);
>> + else {
>
> If only one branch of a conditional statement is a single statement,
> then you should use braces in both branches.
>

Sure, I will fix this in v3.

> See:
> https://www.kernel.org/doc/html/v4.10/process/coding-style.html#placing-braces-and-spaces
>
>
>
>> + hold_time |= JZ4780_I2C_SDAHD_HDENB;
>> + jz4780_i2c_writew(i2c, JZ4780_I2C_SDAHD, hold_time);
>> + }
>> } else {
>> /* disable hold time */
>> - jz4780_i2c_writew(i2c, JZ4780_I2C_SDAHD, 0);
>> + if (i2c->cdata->version >= ID_X1000)
>> + jz4780_i2c_writew(i2c, X1000_I2C_SDAHD, 0);
>> + else
>> + jz4780_i2c_writew(i2c, JZ4780_I2C_SDAHD, 0);
>> }
>>
>> return 0;
>> @@ -359,9 +386,11 @@ static int jz4780_i2c_cleanup(struct jz4780_i2c
>> *i2c)
>> spin_lock_irqsave(&i2c->lock, flags);
>>
>> /* can send stop now if need */
>> - tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_CTRL);
>> - tmp &= ~JZ4780_I2C_CTRL_STPHLD;
>> - jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp);
>> + if (i2c->cdata->version < ID_X1000) {
>> + tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_CTRL);
>> + tmp &= ~JZ4780_I2C_CTRL_STPHLD;
>> + jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp);
>> + }
>>
>> /* disable all interrupts first */
>> jz4780_i2c_writew(i2c, JZ4780_I2C_INTM, 0);
>> @@ -399,11 +428,18 @@ static int jz4780_i2c_prepare(struct jz4780_i2c
>> *i2c)
>> return jz4780_i2c_enable(i2c);
>> }
>>
>> -static void jz4780_i2c_send_rcmd(struct jz4780_i2c *i2c, int cmd_count)
>> +static void jz4780_i2c_send_rcmd(struct jz4780_i2c *i2c,
>> + int cmd_count, int cmd_left)
>
> Sorry to be pedantic ;) but this line is not properly indented. You
> should indent with tab charaters (configure your IDE for one tab == 4
> spaces) as much as possible, then use spaces to align the first word.
>

Sure, I will fix this in v3.

Thanks and best regards!

> With these two things fixed:
> Acked-by: Paul Cercueil <paul@crapouillou.net>
>
> Cheers,
> -Paul
>
>
>> {
>> int i;
>>
>> - for (i = 0; i < cmd_count; i++)
>> + for (i = 0; i < cmd_count - 1; i++)
>> + jz4780_i2c_writew(i2c, JZ4780_I2C_DC, JZ4780_I2C_DC_READ);
>> +
>> + if ((cmd_left == 0) && (i2c->cdata->version >= ID_X1000))
>> + jz4780_i2c_writew(i2c, JZ4780_I2C_DC,
>> + JZ4780_I2C_DC_READ | X1000_I2C_DC_STOP);
>> + else
>> jz4780_i2c_writew(i2c, JZ4780_I2C_DC, JZ4780_I2C_DC_READ);
>> }
>>
>> @@ -458,37 +494,44 @@ static irqreturn_t jz4780_i2c_irq(int irqno,
>> void *dev_id)
>>
>> rd_left = i2c->rd_total_len - i2c->rd_data_xfered;
>>
>> - if (rd_left <= JZ4780_I2C_FIFO_LEN)
>> + if (rd_left <= i2c->cdata->fifosize)
>> jz4780_i2c_writew(i2c, JZ4780_I2C_RXTL, rd_left - 1);
>> }
>>
>> if (intst & JZ4780_I2C_INTST_TXEMP) {
>> if (i2c->is_write == 0) {
>> int cmd_left = i2c->rd_total_len - i2c->rd_cmd_xfered;
>> - int max_send = (JZ4780_I2C_FIFO_LEN - 1)
>> + int max_send = (i2c->cdata->fifosize - 1)
>> - (i2c->rd_cmd_xfered
>> - i2c->rd_data_xfered);
>> int cmd_to_send = min(cmd_left, max_send);
>>
>> if (i2c->rd_cmd_xfered != 0)
>> cmd_to_send = min(cmd_to_send,
>> - JZ4780_I2C_FIFO_LEN
>> - - TX_LEVEL - 1);
>> + i2c->cdata->fifosize
>> + - i2c->cdata->tx_level - 1);
>>
>> if (cmd_to_send) {
>> - jz4780_i2c_send_rcmd(i2c, cmd_to_send);
>> i2c->rd_cmd_xfered += cmd_to_send;
>> + cmd_left = i2c->rd_total_len -
>> + i2c->rd_cmd_xfered;
>> + jz4780_i2c_send_rcmd(i2c,
>> + cmd_to_send, cmd_left);
>> +
>> }
>>
>> - cmd_left = i2c->rd_total_len - i2c->rd_cmd_xfered;
>> if (cmd_left == 0) {
>> intmsk = jz4780_i2c_readw(i2c, JZ4780_I2C_INTM);
>> intmsk &= ~JZ4780_I2C_INTM_MTXEMP;
>> jz4780_i2c_writew(i2c, JZ4780_I2C_INTM, intmsk);
>>
>> - tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_CTRL);
>> - tmp &= ~JZ4780_I2C_CTRL_STPHLD;
>> - jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp);
>> + if (i2c->cdata->version < ID_X1000) {
>> + tmp = jz4780_i2c_readw(i2c,
>> + JZ4780_I2C_CTRL);
>> + tmp &= ~JZ4780_I2C_CTRL_STPHLD;
>> + jz4780_i2c_writew(i2c,
>> + JZ4780_I2C_CTRL, tmp);
>> + }
>> }
>> } else {
>> unsigned short data;
>> @@ -497,23 +540,26 @@ static irqreturn_t jz4780_i2c_irq(int irqno,
>> void *dev_id)
>> i2c_sta = jz4780_i2c_readw(i2c, JZ4780_I2C_STA);
>>
>> while ((i2c_sta & JZ4780_I2C_STA_TFNF) &&
>> - (i2c->wt_len > 0)) {
>> + (i2c->wt_len > 0)) {
>> i2c_sta = jz4780_i2c_readw(i2c, JZ4780_I2C_STA);
>> data = *i2c->wbuf;
>> data &= ~JZ4780_I2C_DC_READ;
>> - jz4780_i2c_writew(i2c, JZ4780_I2C_DC,
>> - data);
>> + if ((!i2c->stop_hold) && (i2c->cdata->version >=
>> + ID_X1000))
>> + data |= X1000_I2C_DC_STOP;
>> + jz4780_i2c_writew(i2c, JZ4780_I2C_DC, data);
>> i2c->wbuf++;
>> i2c->wt_len--;
>> }
>>
>> if (i2c->wt_len == 0) {
>> - if (!i2c->stop_hold) {
>> + if ((!i2c->stop_hold) && (i2c->cdata->version <
>> + ID_X1000)) {
>> tmp = jz4780_i2c_readw(i2c,
>> - JZ4780_I2C_CTRL);
>> + JZ4780_I2C_CTRL);
>> tmp &= ~JZ4780_I2C_CTRL_STPHLD;
>> - jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL,
>> - tmp);
>> + jz4780_i2c_writew(i2c,
>> + JZ4780_I2C_CTRL, tmp);
>> }
>>
>> jz4780_i2c_trans_done(i2c);
>> @@ -567,20 +613,22 @@ static inline int jz4780_i2c_xfer_read(struct
>> jz4780_i2c *i2c,
>> i2c->rd_data_xfered = 0;
>> i2c->rd_cmd_xfered = 0;
>>
>> - if (len <= JZ4780_I2C_FIFO_LEN)
>> + if (len <= i2c->cdata->fifosize)
>> jz4780_i2c_writew(i2c, JZ4780_I2C_RXTL, len - 1);
>> else
>> - jz4780_i2c_writew(i2c, JZ4780_I2C_RXTL, RX_LEVEL);
>> + jz4780_i2c_writew(i2c, JZ4780_I2C_RXTL, i2c->cdata->rx_level);
>>
>> - jz4780_i2c_writew(i2c, JZ4780_I2C_TXTL, TX_LEVEL);
>> + jz4780_i2c_writew(i2c, JZ4780_I2C_TXTL, i2c->cdata->tx_level);
>>
>> jz4780_i2c_writew(i2c, JZ4780_I2C_INTM,
>> JZ4780_I2C_INTM_MRXFL | JZ4780_I2C_INTM_MTXEMP
>> | JZ4780_I2C_INTM_MTXABT | JZ4780_I2C_INTM_MRXOF);
>>
>> - tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_CTRL);
>> - tmp |= JZ4780_I2C_CTRL_STPHLD;
>> - jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp);
>> + if (i2c->cdata->version < ID_X1000) {
>> + tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_CTRL);
>> + tmp |= JZ4780_I2C_CTRL_STPHLD;
>> + jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp);
>> + }
>>
>> spin_unlock_irqrestore(&i2c->lock, flags);
>>
>> @@ -626,14 +674,16 @@ static inline int jz4780_i2c_xfer_write(struct
>> jz4780_i2c *i2c,
>> i2c->wbuf = buf;
>> i2c->wt_len = len;
>>
>> - jz4780_i2c_writew(i2c, JZ4780_I2C_TXTL, TX_LEVEL);
>> + jz4780_i2c_writew(i2c, JZ4780_I2C_TXTL, i2c->cdata->tx_level);
>>
>> jz4780_i2c_writew(i2c, JZ4780_I2C_INTM, JZ4780_I2C_INTM_MTXEMP
>> | JZ4780_I2C_INTM_MTXABT);
>>
>> - tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_CTRL);
>> - tmp |= JZ4780_I2C_CTRL_STPHLD;
>> - jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp);
>> + if (i2c->cdata->version < ID_X1000) {
>> + tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_CTRL);
>> + tmp |= JZ4780_I2C_CTRL_STPHLD;
>> + jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp);
>> + }
>>
>> spin_unlock_irqrestore(&i2c->lock, flags);
>>
>> @@ -716,8 +766,25 @@ static const struct i2c_algorithm
>> jz4780_i2c_algorithm = {
>> .functionality = jz4780_i2c_functionality,
>> };
>>
>> +static const struct ingenic_i2c_config jz4780_i2c_config = {
>> + .version = ID_JZ4780,
>> +
>> + .fifosize = JZ4780_I2C_FIFO_LEN,
>> + .tx_level = JZ4780_I2C_FIFO_LEN / 2,
>> + .rx_level = JZ4780_I2C_FIFO_LEN / 2 - 1,
>> +};
>> +
>> +static const struct ingenic_i2c_config x1000_i2c_config = {
>> + .version = ID_X1000,
>> +
>> + .fifosize = X1000_I2C_FIFO_LEN,
>> + .tx_level = X1000_I2C_FIFO_LEN / 2,
>> + .rx_level = X1000_I2C_FIFO_LEN / 2 - 1,
>> +};
>> +
>> static const struct of_device_id jz4780_i2c_of_matches[] = {
>> - { .compatible = "ingenic,jz4780-i2c", },
>> + { .compatible = "ingenic,jz4780-i2c", .data = &jz4780_i2c_config },
>> + { .compatible = "ingenic,x1000-i2c", .data = &x1000_i2c_config },
>> { /* sentinel */ }
>> };
>> MODULE_DEVICE_TABLE(of, jz4780_i2c_of_matches);
>> @@ -734,6 +801,12 @@ static int jz4780_i2c_probe(struct
>> platform_device *pdev)
>> if (!i2c)
>> return -ENOMEM;
>>
>> + i2c->cdata = device_get_match_data(&pdev->dev);
>> + if (!i2c->cdata) {
>> + dev_err(&pdev->dev, "Error: No device match found\n");
>> + return -ENODEV;
>> + }
>> +
>> i2c->adap.owner = THIS_MODULE;
>> i2c->adap.algo = &jz4780_i2c_algorithm;
>> i2c->adap.algo_data = i2c;
>> @@ -777,9 +850,11 @@ static int jz4780_i2c_probe(struct
>> platform_device *pdev)
>>
>> dev_info(&pdev->dev, "Bus frequency is %d KHz\n", i2c->speed);
>>
>> - tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_CTRL);
>> - tmp &= ~JZ4780_I2C_CTRL_STPHLD;
>> - jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp);
>> + if (i2c->cdata->version < ID_X1000) {
>> + tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_CTRL);
>> + tmp &= ~JZ4780_I2C_CTRL_STPHLD;
>> + jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp);
>> + }
>>
>> jz4780_i2c_writew(i2c, JZ4780_I2C_INTM, 0x0);
>>
>> --
>> 2.7.4
>>
>

\
 
 \ /
  Last update: 2019-12-17 08:51    [W:0.085 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site