lkml.org 
[lkml]   [2019]   [Dec]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 2/7] scsi: ufs-qcom: Add reset control support for host controller
Hi Can,

On 14-11-19, 22:09, Can Guo wrote:
> Add reset control for host controller so that host controller can be reset
> as required in its power up sequence.

I am seeing a regression on UFS on SM8150-mtp with this patch. I think
Jeff is seeing same one lenove laptop on 8998.

845 does not seem to have this issue and only thing I can see is that on
sm8150 and 8998 we define reset as:

resets = <&gcc GCC_UFS_BCR>;
reset-names = "rst";

Thanks

>
> Signed-off-by: Can Guo <cang@codeaurora.org>
> ---
> drivers/scsi/ufs/ufs-qcom.c | 53 +++++++++++++++++++++++++++++++++++++++++++++
> drivers/scsi/ufs/ufs-qcom.h | 3 +++
> 2 files changed, 56 insertions(+)
>
> diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
> index a5b7148..c69c29a1c 100644
> --- a/drivers/scsi/ufs/ufs-qcom.c
> +++ b/drivers/scsi/ufs/ufs-qcom.c
> @@ -246,6 +246,44 @@ static void ufs_qcom_select_unipro_mode(struct ufs_qcom_host *host)
> mb();
> }
>
> +/**
> + * ufs_qcom_host_reset - reset host controller and PHY
> + */
> +static int ufs_qcom_host_reset(struct ufs_hba *hba)
> +{
> + int ret = 0;
> + struct ufs_qcom_host *host = ufshcd_get_variant(hba);
> +
> + if (!host->core_reset) {
> + dev_warn(hba->dev, "%s: reset control not set\n", __func__);
> + goto out;
> + }
> +
> + ret = reset_control_assert(host->core_reset);
> + if (ret) {
> + dev_err(hba->dev, "%s: core_reset assert failed, err = %d\n",
> + __func__, ret);
> + goto out;
> + }
> +
> + /*
> + * The hardware requirement for delay between assert/deassert
> + * is at least 3-4 sleep clock (32.7KHz) cycles, which comes to
> + * ~125us (4/32768). To be on the safe side add 200us delay.
> + */
> + usleep_range(200, 210);
> +
> + ret = reset_control_deassert(host->core_reset);
> + if (ret)
> + dev_err(hba->dev, "%s: core_reset deassert failed, err = %d\n",
> + __func__, ret);
> +
> + usleep_range(1000, 1100);
> +
> +out:
> + return ret;
> +}
> +
> static int ufs_qcom_power_up_sequence(struct ufs_hba *hba)
> {
> struct ufs_qcom_host *host = ufshcd_get_variant(hba);
> @@ -254,6 +292,12 @@ static int ufs_qcom_power_up_sequence(struct ufs_hba *hba)
> bool is_rate_B = (UFS_QCOM_LIMIT_HS_RATE == PA_HS_MODE_B)
> ? true : false;
>
> + /* Reset UFS Host Controller and PHY */
> + ret = ufs_qcom_host_reset(hba);
> + if (ret)
> + dev_warn(hba->dev, "%s: host reset returned %d\n",
> + __func__, ret);
> +
> if (is_rate_B)
> phy_set_mode(phy, PHY_MODE_UFS_HS_B);
>
> @@ -1101,6 +1145,15 @@ static int ufs_qcom_init(struct ufs_hba *hba)
> host->hba = hba;
> ufshcd_set_variant(hba, host);
>
> + /* Setup the reset control of HCI */
> + host->core_reset = devm_reset_control_get(hba->dev, "rst");
> + if (IS_ERR(host->core_reset)) {
> + err = PTR_ERR(host->core_reset);
> + dev_warn(dev, "Failed to get reset control %d\n", err);
> + host->core_reset = NULL;
> + err = 0;
> + }
> +
> /* Fire up the reset controller. Failure here is non-fatal. */
> host->rcdev.of_node = dev->of_node;
> host->rcdev.ops = &ufs_qcom_reset_ops;
> diff --git a/drivers/scsi/ufs/ufs-qcom.h b/drivers/scsi/ufs/ufs-qcom.h
> index d401f17..2d95e7c 100644
> --- a/drivers/scsi/ufs/ufs-qcom.h
> +++ b/drivers/scsi/ufs/ufs-qcom.h
> @@ -6,6 +6,7 @@
> #define UFS_QCOM_H_
>
> #include <linux/reset-controller.h>
> +#include <linux/reset.h>
>
> #define MAX_UFS_QCOM_HOSTS 1
> #define MAX_U32 (~(u32)0)
> @@ -233,6 +234,8 @@ struct ufs_qcom_host {
> u32 dbg_print_en;
> struct ufs_qcom_testbus testbus;
>
> + /* Reset control of HCI */
> + struct reset_control *core_reset;
> struct reset_controller_dev rcdev;
>
> struct gpio_desc *device_reset;
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project

--
~Vinod

\
 
 \ /
  Last update: 2019-12-16 20:04    [W:0.244 / U:0.340 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site