lkml.org 
[lkml]   [2019]   [Dec]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.4 062/177] usb: dwc3: ep0: Clear started flag on completion
Date
From: Thinh Nguyen <Thinh.Nguyen@synopsys.com>

commit 2d7b78f59e020b07fc6338eefe286f54ee2d6773 upstream.

Clear ep0's DWC3_EP_TRANSFER_STARTED flag if the END_TRANSFER command is
completed. Otherwise, we can't start control transfer again after
END_TRANSFER.

Cc: stable@vger.kernel.org
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/usb/dwc3/ep0.c | 8 ++++++++
1 file changed, 8 insertions(+)

--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -1117,6 +1117,9 @@ static void dwc3_ep0_xfernotready(struct
void dwc3_ep0_interrupt(struct dwc3 *dwc,
const struct dwc3_event_depevt *event)
{
+ struct dwc3_ep *dep = dwc->eps[event->endpoint_number];
+ u8 cmd;
+
switch (event->endpoint_event) {
case DWC3_DEPEVT_XFERCOMPLETE:
dwc3_ep0_xfer_complete(dwc, event);
@@ -1129,7 +1132,12 @@ void dwc3_ep0_interrupt(struct dwc3 *dwc
case DWC3_DEPEVT_XFERINPROGRESS:
case DWC3_DEPEVT_RXTXFIFOEVT:
case DWC3_DEPEVT_STREAMEVT:
+ break;
case DWC3_DEPEVT_EPCMDCMPLT:
+ cmd = DEPEVT_PARAMETER_CMD(event->parameters);
+
+ if (cmd == DWC3_DEPCMD_ENDTRANSFER)
+ dep->flags &= ~DWC3_EP_TRANSFER_STARTED;
break;
}
}

\
 
 \ /
  Last update: 2019-12-16 19:17    [W:0.540 / U:1.524 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site