lkml.org 
[lkml]   [2019]   [Dec]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.3 034/180] USB: atm: ueagle-atm: add missing endpoint check
Date
From: Johan Hovold <johan@kernel.org>

commit 09068c1ad53fb077bdac288869dec2435420bdc4 upstream.

Make sure that the interrupt interface has an endpoint before trying to
access its endpoint descriptors to avoid dereferencing a NULL pointer.

The driver binds to the interrupt interface with interface number 0, but
must not assume that this interface or its current alternate setting are
the first entries in the corresponding configuration arrays.

Fixes: b72458a80c75 ("[PATCH] USB: Eagle and ADI 930 usb adsl modem driver")
Cc: stable <stable@vger.kernel.org> # 2.6.16
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191210112601.3561-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/usb/atm/ueagle-atm.c | 18 ++++++++++++------
1 file changed, 12 insertions(+), 6 deletions(-)

--- a/drivers/usb/atm/ueagle-atm.c
+++ b/drivers/usb/atm/ueagle-atm.c
@@ -2124,10 +2124,11 @@ resubmit:
/*
* Start the modem : init the data and start kernel thread
*/
-static int uea_boot(struct uea_softc *sc)
+static int uea_boot(struct uea_softc *sc, struct usb_interface *intf)
{
- int ret, size;
struct intr_pkt *intr;
+ int ret = -ENOMEM;
+ int size;

uea_enters(INS_TO_USBDEV(sc));

@@ -2152,6 +2153,11 @@ static int uea_boot(struct uea_softc *sc
if (UEA_CHIP_VERSION(sc) == ADI930)
load_XILINX_firmware(sc);

+ if (intf->cur_altsetting->desc.bNumEndpoints < 1) {
+ ret = -ENODEV;
+ goto err0;
+ }
+
intr = kmalloc(size, GFP_KERNEL);
if (!intr)
goto err0;
@@ -2163,8 +2169,7 @@ static int uea_boot(struct uea_softc *sc
usb_fill_int_urb(sc->urb_int, sc->usb_dev,
usb_rcvintpipe(sc->usb_dev, UEA_INTR_PIPE),
intr, size, uea_intr, sc,
- sc->usb_dev->actconfig->interface[0]->altsetting[0].
- endpoint[0].desc.bInterval);
+ intf->cur_altsetting->endpoint[0].desc.bInterval);

ret = usb_submit_urb(sc->urb_int, GFP_KERNEL);
if (ret < 0) {
@@ -2179,6 +2184,7 @@ static int uea_boot(struct uea_softc *sc
sc->kthread = kthread_create(uea_kthread, sc, "ueagle-atm");
if (IS_ERR(sc->kthread)) {
uea_err(INS_TO_USBDEV(sc), "failed to create thread\n");
+ ret = PTR_ERR(sc->kthread);
goto err2;
}

@@ -2193,7 +2199,7 @@ err1:
kfree(intr);
err0:
uea_leaves(INS_TO_USBDEV(sc));
- return -ENOMEM;
+ return ret;
}

/*
@@ -2554,7 +2560,7 @@ static int uea_bind(struct usbatm_data *
if (ret < 0)
goto error;

- ret = uea_boot(sc);
+ ret = uea_boot(sc, intf);
if (ret < 0)
goto error_rm_grp;


\
 
 \ /
  Last update: 2019-12-16 19:10    [W:0.623 / U:2.904 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site