lkml.org 
[lkml]   [2019]   [Dec]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RFC 00/25] arm64: realtek: Add Xnano X5 and implement TM1628/FD628/AiP1618 LED controllers
From
Date
Hi Robin,

[- Roc He, + linux-rockchip]

Am 12.12.19 um 14:14 schrieb Robin Murphy:
> On 12/12/2019 3:39 am, Andreas Färber wrote:
>> This patch series implements the LED controllers found in some RTD1295
>> based
>> TV set-top boxes.
[...]
>> TM1628 and related chipsets have an internal Display RAM, from which they
>> control a two-dimensional array of LED components, often used for
>> seven-segment displays, i.e. clock display, but also for indicators.
>> Individual LEDs can be turned on/off, but brightness is applied globally.
>> Some chipsets also support polling a two-dimensional key pad.
[...]
>> Some more notes:
>> * Public TM1628 V1.1 datasheet is in Chinese only and differs from the
>>    unversioned English version found elsewhere on datasheet sites by
>>    documenting more display modes, included here (guessed from Arabic
>> numbers).
>> * Public FD628 datasheet is Chinese only (guesses based on Arabic
>> numbers).
>>    FD623 appears to have more output lines, which would fit current
>> data types.
>> * AiP1618 links were all broken (404); try Google "site:szfdwdz.com"
>> search
>>    to actually find the documents available on their site.
>> * Princeton PT6964 is another related LED controller with public
>> datasheet
>>    that I did not encounter in my TV boxes yet, thus not included here.
>>    Datasheets are linked only for PT6959 and PT6967, but PT6964 V1.3
>> and V1.4
>>    are available elsewhere. PT6967 has more output lines, which my
>> current
>>    data types could barely hold. Maybe bump them all to u32 type right
>> away?
>> * TM1628 is also found on MeLE V9 TV box, to be tested.
>> * FD628 is also found on Amlogic S905X2 based Vontar X96 Max TV box,
>>    to be tested (once UART is soldered).
>> * AiP1618 was found on Ava and Lake I TV boxes, to be tested.
>> * It remained unclear to me which of these many similar chipsets was
>> first.
>>    My driver name is therefore based on the chip I encountered first.
>
> It's pretty cool to see this!

Glad someone else finds it useful. :)

> My Rockchip box has an AiP1618-driven
> display [...]

You don't mention the model: Does it have a mainline .dts we can extend?
If not, I'd ask you to get that merged into -next, then I can happily
pick up patches adding the LED controller for your TV box into this
series as it evolves. (I'm expecting at least two more RFC iterations.)

Similarly, I'm planning to drop Xnano X5 in v2, if it doesn't require a
respin, so that no Realtek-specific parts other than .dts node additions
remain here.

> In case it helps, in my research I found that ARTSCHIP are another
> vendor of these things with accessible datasheets[1],

Thanks, their HT1628 indeed looks compatible.

Sunmoon Microelectronics SM1628 also looks compatible.
http://www.chinaasic.com/product.jsp#item=other#style=27#id=138

> and as far as I
> could tell the command set appears to derive from (or is at least common
> to) some old Holtek VFD controllers.

Hmm, HT16515 looks similar and has more lines, RAM and mode bits than I
prepared here.
https://www.holtek.com/productdetail/-/vg/ht16515

So I'd need to make more numbers model-dependent and allocate the
Display RAM buffer dynamically.

Whereas HT16D35A seems incompatible command-wise, and HT16528 appears to
be out of scope, for dot displays and with fancy embedded character map.

No Holtek email alias that I can quickly spot.

But given that I'm proposing vendor-specific compatibles just in case,
the main decisions will be the Kconfig symbol and module name. The
driver code itself we could always refactor after merging, and renaming
the schema file (as opposed to compatible) should also be possible.

> If I can figure out the DT parts (which was one of the areas that
> stalled my attempt) I'll try to have a play with this series over the
> holidays.

That reminded me that I forgot to push - done in the meantime. :)

> One thought to ponder is that I have an "88:88" display where
> the entire middle grid is reserved for the colon (which is wired to just
> one segment) - I'm not sure how that could be sanely described :/

Well, that sounds exactly like my bindings example and X9S. You'll find
the colon configured as LED, separate from the four digits, which don't
need to be contiguous due to separate reg entries per digit.

While it may be possible to put more cleverness into text_store() to set
the colon as part of five-char "88:88" text, we'd likely want to blink
it every half second, which we should better do without updating the
full display text from "88:88" to "88 88". "8888" updated every minute
sounds less problematic.

Ugly with the colon LED is that the redone LED bindings don't yet have a
function defined for this, so I'm currently misusing whatever was there.
I should prepare a bindings addition, if we want to use an LED node.

Regards,
Andreas

> [1]
> http://www.artschip.com/products.asp?lx=small&anid=779&ParentName=Signal%20management%20_I_O%20Extender
>
>> This series is based on my not-yet-posted RTD1295 pinctrl and GPIO
>> drivers.
>>
>> Latest experimental patches at:
>> https://github.com/afaerber/linux/commits/rtd1295-next
[snip]

--
SUSE Software Solutions Germany GmbH
Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer
HRB 36809 (AG Nürnberg)

\
 
 \ /
  Last update: 2019-12-12 21:55    [W:0.868 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site