lkml.org 
[lkml]   [2019]   [Dec]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH linux-can/testing] can: tcan4x5x: Disable the INH pin device-state GPIO is unavailable
Date
If the device state GPIO is not connected to the host then disable the
INH output from the TCAN device per section 8.3.5 of the data sheet.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
---
drivers/net/can/m_can/tcan4x5x.c | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/net/can/m_can/tcan4x5x.c b/drivers/net/can/m_can/tcan4x5x.c
index b5d2ea0999c1..6a1f242d1876 100644
--- a/drivers/net/can/m_can/tcan4x5x.c
+++ b/drivers/net/can/m_can/tcan4x5x.c
@@ -102,6 +102,7 @@
#define TCAN4X5X_MODE_NORMAL BIT(7)

#define TCAN4X5X_DISABLE_WAKE_MSK (BIT(31) | BIT(30))
+#define TCAN4X5X_DISABLE_INH_MSK BIT(9)

#define TCAN4X5X_SW_RESET BIT(2)

@@ -360,6 +361,15 @@ static int tcan4x5x_disable_wake(struct m_can_classdev *cdev)
TCAN4X5X_DISABLE_WAKE_MSK, 0x00);
}

+static int tcan4x5x_disable_state(struct m_can_classdev *cdev)
+{
+ struct tcan4x5x_priv *tcan4x5x = cdev->device_data;
+
+ return regmap_update_bits(tcan4x5x->regmap, TCAN4X5X_CONFIG,
+ TCAN4X5X_DISABLE_INH_MSK, 0x01);
+
+}
+
static int tcan4x5x_parse_config(struct m_can_classdev *cdev)
{
struct tcan4x5x_priv *tcan4x5x = cdev->device_data;
@@ -383,8 +393,10 @@ static int tcan4x5x_parse_config(struct m_can_classdev *cdev)
tcan4x5x->device_state_gpio = devm_gpiod_get_optional(cdev->dev,
"device-state",
GPIOD_IN);
- if (IS_ERR(tcan4x5x->device_state_gpio))
+ if (IS_ERR(tcan4x5x->device_state_gpio)) {
tcan4x5x->device_state_gpio = NULL;
+ tcan4x5x_disable_state(cdev);
+ }

return 0;
}
--
2.23.0
\
 
 \ /
  Last update: 2019-12-12 17:18    [W:0.801 / U:0.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site