lkml.org 
[lkml]   [2019]   [Dec]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] input: keyboard: imx_sc_key: Only take the valid data from SCU firmware as key state
Date
When reading key state from SCU, the response data from SCU firmware
is 4 bytes due to MU message protocol, but ONLY the first byte is the
key state, other 3 bytes could be some dirty data, so we should ONLY
take the first byte as key state to avoid reporting incorrect state.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
drivers/input/keyboard/imx_sc_key.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/input/keyboard/imx_sc_key.c b/drivers/input/keyboard/imx_sc_key.c
index 5379952..9f809ae 100644
--- a/drivers/input/keyboard/imx_sc_key.c
+++ b/drivers/input/keyboard/imx_sc_key.c
@@ -78,7 +78,13 @@ static void imx_sc_check_for_events(struct work_struct *work)
return;
}

- state = (bool)msg.state;
+ /*
+ * The response data from SCU firmware is 4 bytes,
+ * but ONLY the first byte is the key state, other
+ * 3 bytes could be some dirty data, so we should
+ * ONLY take the first byte as key state.
+ */
+ state = (bool)(msg.state & 0xff);

if (state ^ priv->keystate) {
priv->keystate = state;
--
2.7.4
\
 
 \ /
  Last update: 2019-12-13 03:12    [W:1.445 / U:0.304 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site