lkml.org 
[lkml]   [2019]   [Dec]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH AUTOSEL 5.4 006/134] gpio: mxc: Only get the second IRQ when there is more than one IRQ
Date
From: Anson Huang <Anson.Huang@nxp.com>

[ Upstream commit c8f3d144004dd3f471ffd414690d15a005e4acd6 ]

On some of i.MX SoCs like i.MX8QXP, there is ONLY one IRQ for each
GPIO bank, so it is better to check the IRQ count before getting
second IRQ to avoid below error message during probe:

[ 1.070908] gpio-mxc 5d080000.gpio: IRQ index 1 not found
[ 1.077420] gpio-mxc 5d090000.gpio: IRQ index 1 not found
[ 1.083766] gpio-mxc 5d0a0000.gpio: IRQ index 1 not found
[ 1.090122] gpio-mxc 5d0b0000.gpio: IRQ index 1 not found
[ 1.096470] gpio-mxc 5d0c0000.gpio: IRQ index 1 not found
[ 1.102804] gpio-mxc 5d0d0000.gpio: IRQ index 1 not found
[ 1.109144] gpio-mxc 5d0e0000.gpio: IRQ index 1 not found
[ 1.115475] gpio-mxc 5d0f0000.gpio: IRQ index 1 not found

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpio/gpio-mxc.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c
index 7907a87558662..c77d474185f31 100644
--- a/drivers/gpio/gpio-mxc.c
+++ b/drivers/gpio/gpio-mxc.c
@@ -411,6 +411,7 @@ static int mxc_gpio_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
struct mxc_gpio_port *port;
+ int irq_count;
int irq_base;
int err;

@@ -426,9 +427,15 @@ static int mxc_gpio_probe(struct platform_device *pdev)
if (IS_ERR(port->base))
return PTR_ERR(port->base);

- port->irq_high = platform_get_irq(pdev, 1);
- if (port->irq_high < 0)
- port->irq_high = 0;
+ irq_count = platform_irq_count(pdev);
+ if (irq_count < 0)
+ return irq_count;
+
+ if (irq_count > 1) {
+ port->irq_high = platform_get_irq(pdev, 1);
+ if (port->irq_high < 0)
+ port->irq_high = 0;
+ }

port->irq = platform_get_irq(pdev, 0);
if (port->irq < 0)
--
2.20.1
\
 
 \ /
  Last update: 2019-12-11 16:13    [W:1.900 / U:0.216 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site