lkml.org 
[lkml]   [2019]   [Dec]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] arm64: dts: meson: add A1 periphs and PLL clock nodes
Date
Add A1 periphs and PLL clock controller nodes, Some clocks
in periphs controller are the parents of PLL clocks, Meanwhile
some clocks in PLL controller are those of periphs clocks.
They rely on each other.

Signed-off-by: Jian Hu <jian.hu@amlogic.com>
---
Compared with the previous series, the register region
is only for the clock. So syscon is not used in A1.

This patch depends on A1 clock patchset at [0]

Changes since v1 at [1]:
-remove the compared message in commit description,
And put it after the '---'
-reorder order the includes
-reorder the clock node
-change the clock node name

[0] https://lkml.kernel.org/r/20191206074052.15557-1-jian.hu@amlogic.com
[1] https://lkml.kernel.org/r/20191211070835.83489-1-jian.hu@amlogic.com

---
---
arch/arm64/boot/dts/amlogic/meson-a1.dtsi | 26 +++++++++++++++++++++++
1 file changed, 26 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
index 7210ad049d1d..48ba3eba547d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
@@ -3,6 +3,8 @@
* Copyright (c) 2019 Amlogic, Inc. All rights reserved.
*/

+#include <dt-bindings/clock/a1-pll-clkc.h>
+#include <dt-bindings/clock/a1-clkc.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>

@@ -74,6 +76,21 @@
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x1000000>;

+ clkc_periphs: clock-controller@800 {
+ compatible = "amlogic,a1-periphs-clkc";
+ #clock-cells = <1>;
+ reg = <0 0x800 0 0x104>;
+ clocks = <&clkc_pll CLKID_FCLK_DIV2>,
+ <&clkc_pll CLKID_FCLK_DIV3>,
+ <&clkc_pll CLKID_FCLK_DIV5>,
+ <&clkc_pll CLKID_FCLK_DIV7>,
+ <&clkc_pll CLKID_HIFI_PLL>,
+ <&xtal>;
+ clock-names = "fclk_div2", "fclk_div3",
+ "fclk_div5", "fclk_div7",
+ "hifi_pll", "xtal";
+ };
+
uart_AO: serial@1c00 {
compatible = "amlogic,meson-gx-uart",
"amlogic,meson-ao-uart";
@@ -93,6 +110,15 @@
clock-names = "xtal", "pclk", "baud";
status = "disabled";
};
+
+ clkc_pll: clock-controller@7c80 {
+ compatible = "amlogic,a1-pll-clkc";
+ #clock-cells = <1>;
+ reg = <0 0x7c80 0 0x21c>;
+ clocks = <&clkc_periphs CLKID_XTAL_FIXPLL>,
+ <&clkc_periphs CLKID_XTAL_HIFIPLL>;
+ clock-names = "xtal_fixpll", "xtal_hifipll";
+ };
};

gic: interrupt-controller@ff901000 {
--
2.24.0
\
 
 \ /
  Last update: 2019-12-11 14:24    [W:0.022 / U:0.916 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site