lkml.org 
[lkml]   [2019]   [Dec]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH net-next 5/6] arm64: dts: mt7622: add mt7531 dsa to mt7622-rfb1 board
From
Date
On Wed, 2019-12-11 at 00:51 +0800, Andrew Lunn wrote:
> > + port@6 {
> > + reg = <6>;
> > + label = "cpu";
> > + ethernet = <&gmac0>;
> > + phy-mode = "2500base-x";
> > +
> > + fixed-link {
> > + speed = <2500>;
> > + full-duplex;
> > + pause;
> > + };
>
> This fixed-link should not be needed. The DSA driver is supposed to
> configure the CPU port to its fastest speed by default. 2500 is
> the fastest speed a 2500Base-X link can do...
I'll add the cpu port logic to use the fastest speed by default.
It also needs to modify the mt753x_phylink_mac_config() logic.

Landen
>
> Andrew

\
 
 \ /
  Last update: 2019-12-11 19:28    [W:0.054 / U:0.424 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site