lkml.org 
[lkml]   [2019]   [Dec]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v1] sdhci: tegra: Add workaround for Broadcom WiFi
On Wed, 11 Dec 2019 at 16:46, Dmitry Osipenko <digetx@gmail.com> wrote:
>
> Hello Ulf,
>
> 11.12.2019 11:11, Ulf Hansson пишет:
> > On Tue, 10 Dec 2019 at 02:40, Dmitry Osipenko <digetx@gmail.com> wrote:
> >>
> >> All Tegra20 boards that have embedded Broadcom WiFi SDIO chip are affected
> >> by a problem where WiFi chip reports CCCR v1.10, while it should v1.20.
> >> In a result high-speed mode isn't enabled for the WiFi card and this
> >> results in a malfunctioning SDIO communication.
> >
> > Does that also mean SDIO_SPEED_SHS bit is set when reading SDIO_CCCR_SPEED?
>
> Yes, the SDIO_SPEED_SHS bit is set.
>
> >> brcmfmac: brcmf_sdio_readframes: read 304 bytes from channel 1 failed: -84
> >> brcmfmac: brcmf_sdio_rxfail: abort command, terminate frame, send NAK
> >>
> >> Downstream kernels are overriding card's CCCR info in SDHCI driver to fix
> >> the problem, let's do the same in upstream.
> >>
> >> The change is inspired by omap_hsmmc_init_card() of OMAP's HSMMC driver,
> >> which overrides card's info for the TI wl1251 WiFi.
> >
> > This is a temporary solution and should be replaced by doing the DT
> > parsing during
> >
> > So, yes, let's see if we can use a card quirk instead. That's the first option.
> >
> > A second option is simply to parse the DT subnode for a new DT
> > property during mmc_sdio_init_card(). Along the lines of what we do
> > for the broken-hpi DT binding for eMMC.
>
> Let's try the first option. My understanding is that the problem affects
> only the specific model of the WiFi chip and it's not a board-specific
> problem. I'll add Broadcom driver people to CC for the next version of
> the patch, maybe they'll have something to say.

Okay, sounds reasonable. By looking at your latest attempt for a fix,
I have two minor nitpicks, otherwise it looks good.

The nitpicks:
I suggest to rename MMC_QUIRK_HIGH_SPEED_CARD to MMC_QUIRK_HIGH_SPEED
and mmc_card_need_high_speed_toggle() to mmc_card_quirk_hs().

Kind regards
Uffe

\
 
 \ /
  Last update: 2019-12-11 17:11    [W:0.067 / U:0.332 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site