lkml.org 
[lkml]   [2019]   [Dec]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 8/8] arm64: dts: rockchip: RockPro64: enable wifi module at sdio0
From
Date
re-send as plain text for mailing lists, sorry.

Soeren

On 11.12.19 16:43, Soeren Moch wrote:
>
>
> On 10.12.19 11:13, Heiko Stübner wrote:
>> Am Dienstag, 10. Dezember 2019, 11:08:18 CET schrieb Soeren Moch:
>>> Hi Heiko,
>>>
>>> On 10.12.19 02:18, Heiko Stübner wrote:
>>>> Hi Soeren,
>>>>
>>>> Am Dienstag, 10. Dezember 2019, 00:29:21 CET schrieb Soeren Moch:
>>>>> On 10.12.19 00:08, Heiko Stübner wrote:
>>>>>> Am Montag, 9. Dezember 2019, 23:38:22 CET schrieb Soeren Moch:
>>>>>>> RockPro64 supports an Ampak AP6359SA based wifi/bt combo module.
>>>>>>> The BCM4359/9 wifi controller in this module is connected to sdio0,
>>>>>>> enable this interface.
>>>>>>>
>>>>>>> Signed-off-by: Soeren Moch <smoch@web.de>
>>>>>>> ---
>>>>>>> Not sure where to place exactly the sdio0 node in the dts because
>>>>>>> existing sd nodes are not sorted alphabetically.
>>>>>>>
>>>>>>> This last patch in this brcmfmac patch series probably should be picked
>>>>>>> up by Heiko independently of the rest of this series. It was sent together
>>>>>>> to show how this brcmfmac extension for 4359-sdio support with RSDB is
>>>>>>> used and tested.
>>>>>> node placement looks good so I can apply it, just a general questions
>>>>>> I only got patch 8/8 are patches 1-7 relevant for this one and what are they?
>>>>> Patches 1-7 are the patches to support the BCM4359 chipset with SDIO
>>>>> interface in the linux brcmfmac net-wireless driver, see [1].
>>>>>
>>>>> So this patch series has 2 parts:
>>>>> patches 1-7: add support for the wifi chipset in the wireless driver,
>>>>> this has to go through net-wireless
>>>>> patch 8: enable the wifi module with this chipset on RockPro64, this patch
>>>> Thanks for the clarification :-) .
>>>>
>>>> As patch 8 "only" does the core sdio node, it doesn't really depend on the
>>>> earlier ones and you can submit any uart-hooks for bluetooth once the
>>>> other patches land I guess.
>>> The uart part for bluetooth already is in: uart0.
>>> However, I haven't tested if it really works.
>> In the new world there is now also a way to actually hook the bt-uart to
>> the wifi driver without userspace intervention, and you might want to hook
>> up the interrupt as well for sdio?
>> For example look at the rock960:
> Thanks for the examples.
>> sdio-interrupt: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi#n510
> The signal name wifi_host_wake_l suggests that this is an active-low
> wake-up signal, probably used for wake-on-wifi. But in fact this is
> the active-high out-of-band sdio interrupt and can also be used as
> such on RockPro64 when following your example.
> However, with this external interrupt enabled  wifi runs unstable,
> maybe because board designers (probably confused by their own naming
> style) mixed in the PCI-Express-WAKE# signal to route this to the same
> GPIO.
>
> So I want to use the in-band sdio interrupt instead on RockPro64,
> which works perfectly fine.
> ||||
>> uart-magic: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi#n557
> OK, people probably like to see Bluetooth support. I will add it.
>
> Soeren
>> Heiko
>>
>>>>> If this was confusing, what would be the ideal way to post such series?
>>>> I think every maintainer has some slightly different perspective on this,
>>>> but personally I like getting the whole series to follow the discussion but
>>>> also to just see when the driver-side changes get merged, as the dts-parts
>>>> need to wait for that in a lot of cases.
>>> OK, thanks.
>>> I will add you for the whole series when sending a v2.
>>>
>>> Soeren
>>>> Heiko
>>>>
>>>>
>>>>> [1] https://patchwork.kernel.org/project/linux-wireless/list/?series=213951
>>>>>> Thanks
>>>>>> Heiko
>>>>>>
>>>>>>
>>>>>>> Cc: Heiko Stuebner <heiko@sntech.de>
>>>>>>> Cc: Kalle Valo <kvalo@codeaurora.org>
>>>>>>> Cc: linux-wireless@vger.kernel.org
>>>>>>> Cc: brcm80211-dev-list.pdl@broadcom.com
>>>>>>> Cc: brcm80211-dev-list@cypress.com
>>>>>>> Cc: netdev@vger.kernel.org
>>>>>>> Cc: linux-arm-kernel@lists.infradead.org
>>>>>>> Cc: linux-rockchip@lists.infradead.org
>>>>>>> Cc: linux-kernel@vger.kernel.org
>>>>>>> ---
>>>>>>> .../boot/dts/rockchip/rk3399-rockpro64.dts | 21 ++++++++++++-------
>>>>>>> 1 file changed, 14 insertions(+), 7 deletions(-)
>>>>>>>
>>>>>>> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
>>>>>>> index 7f4b2eba31d4..9fa92790d6e0 100644
>>>>>>> --- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
>>>>>>> +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
>>>>>>> @@ -71,13 +71,6 @@
>>>>>>> clock-names = "ext_clock";
>>>>>>> pinctrl-names = "default";
>>>>>>> pinctrl-0 = <&wifi_enable_h>;
>>>>>>> -
>>>>>>> - /*
>>>>>>> - * On the module itself this is one of these (depending
>>>>>>> - * on the actual card populated):
>>>>>>> - * - SDIO_RESET_L_WL_REG_ON
>>>>>>> - * - PDN (power down when low)
>>>>>>> - */
>>>>>>> reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
>>>>>>> };
>>>>>>>
>>>>>>> @@ -650,6 +643,20 @@
>>>>>>> status = "okay";
>>>>>>> };
>>>>>>>
>>>>>>> +&sdio0 {
>>>>>>> + bus-width = <4>;
>>>>>>> + cap-sd-highspeed;
>>>>>>> + cap-sdio-irq;
>>>>>>> + disable-wp;
>>>>>>> + keep-power-in-suspend;
>>>>>>> + mmc-pwrseq = <&sdio_pwrseq>;
>>>>>>> + non-removable;
>>>>>>> + pinctrl-names = "default";
>>>>>>> + pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
>>>>>>> + sd-uhs-sdr104;
>>>>>>> + status = "okay";
>>>>>>> +};
>>>>>>> +
>>>>>>> &sdmmc {
>>>>>>> bus-width = <4>;
>>>>>>> cap-sd-highspeed;
>>>>>>> --
>>>>>>> 2.17.1
>>>>>>>
>>
>

\
 
 \ /
  Last update: 2019-12-11 16:51    [W:0.669 / U:1.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site