lkml.org 
[lkml]   [2019]   [Dec]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v1] sdhci: tegra: Add workaround for Broadcom WiFi
From
Date
Hello Ulf,

11.12.2019 11:11, Ulf Hansson пишет:
> On Tue, 10 Dec 2019 at 02:40, Dmitry Osipenko <digetx@gmail.com> wrote:
>>
>> All Tegra20 boards that have embedded Broadcom WiFi SDIO chip are affected
>> by a problem where WiFi chip reports CCCR v1.10, while it should v1.20.
>> In a result high-speed mode isn't enabled for the WiFi card and this
>> results in a malfunctioning SDIO communication.
>
> Does that also mean SDIO_SPEED_SHS bit is set when reading SDIO_CCCR_SPEED?

Yes, the SDIO_SPEED_SHS bit is set.

>> brcmfmac: brcmf_sdio_readframes: read 304 bytes from channel 1 failed: -84
>> brcmfmac: brcmf_sdio_rxfail: abort command, terminate frame, send NAK
>>
>> Downstream kernels are overriding card's CCCR info in SDHCI driver to fix
>> the problem, let's do the same in upstream.
>>
>> The change is inspired by omap_hsmmc_init_card() of OMAP's HSMMC driver,
>> which overrides card's info for the TI wl1251 WiFi.
>
> This is a temporary solution and should be replaced by doing the DT
> parsing during
>
> So, yes, let's see if we can use a card quirk instead. That's the first option.
>
> A second option is simply to parse the DT subnode for a new DT
> property during mmc_sdio_init_card(). Along the lines of what we do
> for the broken-hpi DT binding for eMMC.

Let's try the first option. My understanding is that the problem affects
only the specific model of the WiFi chip and it's not a board-specific
problem. I'll add Broadcom driver people to CC for the next version of
the patch, maybe they'll have something to say.

[snip]

\
 
 \ /
  Last update: 2019-12-11 16:47    [W:0.101 / U:21.656 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site