lkml.org 
[lkml]   [2019]   [Dec]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 3/4] dt-bindings: at24: remove the optional property write-protect-gpios
Date
NVMEM framework is an interface for the at24 EEPROMs as well as for
other drivers, instead of passing the wp-gpios over the different
drivers each time, it would be better to pass it over the NVMEM
subsystem once and for all.

Removing the optional property form the device tree binding document.

Signed-off-by: Khouloud Touil <ktouil@baylibre.com>
---
Documentation/devicetree/bindings/eeprom/at24.yaml | 6 +-----
1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/eeprom/at24.yaml b/Documentation/devicetree/bindings/eeprom/at24.yaml
index e8778560d966..75de83708146 100644
--- a/Documentation/devicetree/bindings/eeprom/at24.yaml
+++ b/Documentation/devicetree/bindings/eeprom/at24.yaml
@@ -145,10 +145,7 @@ properties:
over reads to the next slave address. Please consult the manual of
your device.

- wp-gpios:
- description:
- GPIO to which the write-protect pin of the chip is connected.
- maxItems: 1
+ wp-gpios: true

address-width:
allOf:
@@ -181,7 +178,6 @@ examples:
compatible = "microchip,24c32", "atmel,24c32";
reg = <0x52>;
pagesize = <32>;
- wp-gpios = <&gpio1 3 0>;
num-addresses = <8>;
};
};
--
2.17.1
\
 
 \ /
  Last update: 2019-12-10 16:43    [W:0.081 / U:1.548 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site