lkml.org 
[lkml]   [2019]   [Nov]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 3/4] PCI: brcmstb: add Broadcom STB PCIe host controller driver
On Fri, Nov 8, 2019 at 5:52 AM Andrew Murray <andrew.murray@arm.com> wrote:
>
> On Thu, Nov 07, 2019 at 11:12:58AM -0500, Jim Quinlan wrote:
> > On Thu, Nov 7, 2019 at 10:05 AM Andrew Murray <andrew.murray@arm.com> wrote:
> > >
> > > Thanks for the patch, some initial feedback below, though I will give it a
> > > more detailed review on your respin.
> > >
> > > On Wed, Nov 06, 2019 at 10:45:25PM +0100, Nicolas Saenz Julienne wrote:
> > > > From: Jim Quinlan <james.quinlan@broadcom.com>
> > > >
> > > > This commit adds the basic Broadcom STB PCIe controller. Missing is the
> > > > ability to process MSI. This functionality is added in a subsequent
> > > > commit.
> > > >
> > > > The PCIe block contains an MDIO interface. This is a local interface
> > > > only accessible by the PCIe controller. It cannot be used or shared
> > > > by any other HW. As such, the small amount of code for this
> > > > controller is included in this driver as there is little upside to put
> > > > it elsewhere.
> > > >
> > > > This is based on Jim's original submission[1] but adapted and tailored
> > > > specifically to bcm2711's needs (that's the Raspberry Pi 4). Support for
> > > > the rest of the brcmstb family will soon follow once we get support for
> > > > multiple dma-ranges in dma/direct.
> > >
> > > This commit message is very informative and helpful, though I feel a lot
> > > of this isn't relevant for a commit message (especially as much of it is
> > > time based comments). Instead it would be better to simply describe what
> > > the patch does provide, and any additional helpful notes can be provided
> > > under the '---' after the signed off (which won't make it into git).
> > >
> > > >
> > > > [1] https://patchwork.kernel.org/patch/10605959/
> > > >
> > > > Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
> > > > Co-developed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> > > > Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> > > > ---
> > > > drivers/pci/controller/Kconfig | 12 +
> > > > drivers/pci/controller/Makefile | 1 +
> > > > drivers/pci/controller/pcie-brcmstb.c | 973 ++++++++++++++++++++++++++
> > > > 3 files changed, 986 insertions(+)
> > > > create mode 100644 drivers/pci/controller/pcie-brcmstb.c
> > > >
> > > > diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
> > > > index f5de9119e8d3..8b3aae91d8af 100644
> > > > --- a/drivers/pci/controller/Kconfig
> > > > +++ b/drivers/pci/controller/Kconfig
> > > > @@ -281,6 +281,18 @@ config VMD
> > > > To compile this driver as a module, choose M here: the
> > > > module will be called vmd.
> > > >
> > > > +config PCIE_BRCMSTB
> > > > + bool "Broadcom Brcmstb PCIe host controller"
> > > > + depends on ARCH_BRCMSTB || BMIPS_GENERIC
> > >
> > > I can't see what ARCH_BRCMSTB adds here. Given this also depends
> > > on SOC_BRCMSTB. Are all of these depends really necessary?
> > >
> > > Also should the bool be "Broadcom STB PCIe host contoller" ?
> > >
> > > > + depends on OF
> > > > + depends on SOC_BRCMSTB
> > > > + default ARCH_BRCMSTB || BMIPS_GENERIC
> > >
> > > Please also include COMPILE_TEST in here (look at the other controllers
> > > in the file). This helps improve testing coverage by compiling all drivers
> > > even if they can't be run.
> > >
> > > > + help
> > > > + Say Y here to enable PCIe host controller support for
> > > > + Broadcom Settop Box SOCs. A Broadcom SOC will may have
> > >
> > > s/Settop/Set top/ or s/Settop/STB/?
> > >
> > > > + multiple host controllers as opposed to a single host
> > > > + controller with multiple ports.
> > >
> > > I'm sure many other SOCs may have multiple controllers instead of one
> > > with multiple ports. I'm not sure what value this adds here. It's
> > > always better to describe enough information so the user can determine
> > > if this option will enable something they want on their hardware.
> > >
> > > > +
> > > > config PCI_HYPERV_INTERFACE
> > > > tristate "Hyper-V PCI Interface"
> > > > depends on X86 && HYPERV && PCI_MSI && PCI_MSI_IRQ_DOMAIN && X86_64
> > > > diff --git a/drivers/pci/controller/Makefile b/drivers/pci/controller/Makefile
> > > > index a2a22c9d91af..3fc0b0cf5b5b 100644
> > > > --- a/drivers/pci/controller/Makefile
> > > > +++ b/drivers/pci/controller/Makefile
> > > > @@ -30,6 +30,7 @@ obj-$(CONFIG_PCIE_MEDIATEK) += pcie-mediatek.o
> > > > obj-$(CONFIG_PCIE_MOBIVEIL) += pcie-mobiveil.o
> > > > obj-$(CONFIG_PCIE_TANGO_SMP8759) += pcie-tango.o
> > > > obj-$(CONFIG_VMD) += vmd.o
> > > > +obj-$(CONFIG_PCIE_BRCMSTB) += pcie-brcmstb.o
> > > > # pcie-hisi.o quirks are needed even without CONFIG_PCIE_DW
> > > > obj-y += dwc/
> > > >
> > > > diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
> > > > new file mode 100644
> > > > index 000000000000..880ec11d06a1
> > > > --- /dev/null
> > > > +++ b/drivers/pci/controller/pcie-brcmstb.c
> > > > @@ -0,0 +1,973 @@
> > > > +// SPDX-License-Identifier: GPL-2.0
> > > > +/* Copyright (C) 2009 - 2019 Broadcom */
> > > > +
> > > > +#include <linux/clk.h>
> > > > +#include <linux/compiler.h>
> > > > +#include <linux/delay.h>
> > > > +#include <linux/init.h>
> > > > +#include <linux/interrupt.h>
> > > > +#include <linux/io.h>
> > > > +#include <linux/ioport.h>
> > > > +#include <linux/irqdomain.h>
> > > > +#include <linux/kernel.h>
> > > > +#include <linux/list.h>
> > > > +#include <linux/log2.h>
> > > > +#include <linux/module.h>
> > > > +#include <linux/of_address.h>
> > > > +#include <linux/of_irq.h>
> > > > +#include <linux/of_pci.h>
> > > > +#include <linux/of_platform.h>
> > > > +#include <linux/pci.h>
> > > > +#include <linux/printk.h>
> > > > +#include <linux/sizes.h>
> > > > +#include <linux/slab.h>
> > > > +#include <linux/string.h>
> > > > +#include <linux/types.h>
> > > > +
> > > > +#include "../pci.h"
> > >
> > > Is this last include needed? Sometimes controller drivers suffer from copy and
> > > paste and this is often included when it isn't needed.
> > >
> > > > +
> > > > +/* BRCM_PCIE_CAP_REGS - Offset for the mandatory capability config regs */
> > > > +#define BRCM_PCIE_CAP_REGS 0x00ac
> > > > +
> > > > +/*
> > > > + * Broadcom Settop Box PCIe Register Offsets. The names are from
> > > > + * the chip's RDB and we use them here so that a script can correlate
> > > > + * this code and the RDB to prevent discrepancies.
> > > > + */
> > > > +#define PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1 0x0188
> > > > +#define PCIE_RC_CFG_PRIV1_ID_VAL3 0x043c
> > > > +#define PCIE_RC_DL_MDIO_ADDR 0x1100
> > > > +#define PCIE_RC_DL_MDIO_WR_DATA 0x1104
> > > > +#define PCIE_RC_DL_MDIO_RD_DATA 0x1108
> > > > +#define PCIE_MISC_MISC_CTRL 0x4008
> > > > +#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LO 0x400c
> > > > +#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_HI 0x4010
> > > > +#define PCIE_MISC_RC_BAR1_CONFIG_LO 0x402c
> > > > +#define PCIE_MISC_RC_BAR2_CONFIG_LO 0x4034
> > > > +#define PCIE_MISC_RC_BAR2_CONFIG_HI 0x4038
> > > > +#define PCIE_MISC_RC_BAR3_CONFIG_LO 0x403c
> > > > +#define PCIE_MISC_PCIE_CTRL 0x4064
> > > > +#define PCIE_MISC_PCIE_STATUS 0x4068
> > > > +#define PCIE_MISC_REVISION 0x406c
> > >
> > > PCIE_MISC_REVISION can be removed as it shouldn't be needed
> > >
> > > > +#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT 0x4070
> > > > +#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI 0x4080
> > > > +#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI 0x4084
> > > > +#define PCIE_MISC_HARD_PCIE_HARD_DEBUG 0x4204
> > > > +#define PCIE_INTR2_CPU_BASE 0x4300
> > > > +
> > > > +/*
> > > > + * Broadcom Settop Box PCIe Register Field shift and mask info. The
> > > > + * names are from the chip's RDB and we use them here so that a script
> > > > + * can correlate this code and the RDB to prevent discrepancies.
> > > > + */
> > > > +#define PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1_ENDIAN_MODE_BAR2_MASK 0xc
> > > > +#define PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1_ENDIAN_MODE_BAR2_SHIFT 0x2
> > > > +#define PCIE_RC_CFG_PRIV1_ID_VAL3_CLASS_CODE_MASK 0xffffff
> > > > +#define PCIE_RC_CFG_PRIV1_ID_VAL3_CLASS_CODE_SHIFT 0x0
> > > > +#define PCIE_MISC_MISC_CTRL_SCB_ACCESS_EN_MASK 0x1000
> > > > +#define PCIE_MISC_MISC_CTRL_SCB_ACCESS_EN_SHIFT 0xc
> > > > +#define PCIE_MISC_MISC_CTRL_CFG_READ_UR_MODE_MASK 0x2000
> > > > +#define PCIE_MISC_MISC_CTRL_CFG_READ_UR_MODE_SHIFT 0xd
> > > > +#define PCIE_MISC_MISC_CTRL_MAX_BURST_SIZE_MASK 0x300000
> > > > +#define PCIE_MISC_MISC_CTRL_MAX_BURST_SIZE_SHIFT 0x14
> > > > +#define PCIE_MISC_MISC_CTRL_SCB0_SIZE_MASK 0xf8000000
> > > > +#define PCIE_MISC_MISC_CTRL_SCB0_SIZE_SHIFT 0x1b
> > > > +#define PCIE_MISC_MISC_CTRL_SCB1_SIZE_MASK 0x7c00000
> > > > +#define PCIE_MISC_MISC_CTRL_SCB1_SIZE_SHIFT 0x16
> > > > +#define PCIE_MISC_MISC_CTRL_SCB2_SIZE_MASK 0x1f
> > > > +#define PCIE_MISC_MISC_CTRL_SCB2_SIZE_SHIFT 0x0
> > > > +#define PCIE_MISC_RC_BAR1_CONFIG_LO_SIZE_MASK 0x1f
> > > > +#define PCIE_MISC_RC_BAR1_CONFIG_LO_SIZE_SHIFT 0x0
> > > > +#define PCIE_MISC_RC_BAR2_CONFIG_LO_SIZE_MASK 0x1f
> > > > +#define PCIE_MISC_RC_BAR2_CONFIG_LO_SIZE_SHIFT 0x0
> > > > +#define PCIE_MISC_RC_BAR3_CONFIG_LO_SIZE_MASK 0x1f
> > > > +#define PCIE_MISC_RC_BAR3_CONFIG_LO_SIZE_SHIFT 0x0
> > > > +#define PCIE_MISC_PCIE_CTRL_PCIE_PERSTB_MASK 0x4
> > > > +#define PCIE_MISC_PCIE_CTRL_PCIE_PERSTB_SHIFT 0x2
> > > > +#define PCIE_MISC_PCIE_CTRL_PCIE_L23_REQUEST_MASK 0x1
> > > > +#define PCIE_MISC_PCIE_CTRL_PCIE_L23_REQUEST_SHIFT 0x0
> > > > +#define PCIE_MISC_PCIE_STATUS_PCIE_PORT_MASK 0x80
> > > > +#define PCIE_MISC_PCIE_STATUS_PCIE_PORT_SHIFT 0x7
> > > > +#define PCIE_MISC_PCIE_STATUS_PCIE_DL_ACTIVE_MASK 0x20
> > > > +#define PCIE_MISC_PCIE_STATUS_PCIE_DL_ACTIVE_SHIFT 0x5
> > > > +#define PCIE_MISC_PCIE_STATUS_PCIE_PHYLINKUP_MASK 0x10
> > > > +#define PCIE_MISC_PCIE_STATUS_PCIE_PHYLINKUP_SHIFT 0x4
> > > > +#define PCIE_MISC_PCIE_STATUS_PCIE_LINK_IN_L23_MASK 0x40
> > > > +#define PCIE_MISC_PCIE_STATUS_PCIE_LINK_IN_L23_SHIFT 0x6
> > > > +#define PCIE_MISC_REVISION_MAJMIN_MASK 0xffff
> > > > +#define PCIE_MISC_REVISION_MAJMIN_SHIFT 0
> > > > +#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_LIMIT_MASK 0xfff00000
> > > > +#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_LIMIT_SHIFT 0x14
> > > > +#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_BASE_MASK 0xfff0
> > > > +#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_BASE_SHIFT 0x4
> > > > +#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_NUM_MASK_BITS 0xc
> > > > +#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI_BASE_MASK 0xff
> > > > +#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI_BASE_SHIFT 0x0
> > > > +#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI_LIMIT_MASK 0xff
> > > > +#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI_LIMIT_SHIFT 0x0
> > > > +#define PCIE_MISC_HARD_PCIE_HARD_DEBUG_CLKREQ_DEBUG_ENABLE_MASK 0x2
> > > > +#define PCIE_MISC_HARD_PCIE_HARD_DEBUG_CLKREQ_DEBUG_ENABLE_SHIFT 0x1
> > > > +#define PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK 0x08000000
> > > > +#define PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_SHIFT 0x1b
> > > > +#define PCIE_RGR1_SW_INIT_1_PERST_MASK 0x1
> > > > +#define PCIE_RGR1_SW_INIT_1_PERST_SHIFT 0x0
> > >
> > > Most of the above aren't used anywhere, please remove them.
> > >
> > > > +
> > > > +#define BRCM_NUM_PCIE_OUT_WINS 0x4
> > > > +#define BRCM_MAX_SCB 0x4
> > > > +
> > > > +#define BRCM_MSI_TARGET_ADDR_LT_4GB 0x0fffffffcULL
> > > > +#define BRCM_MSI_TARGET_ADDR_GT_4GB 0xffffffffcULL
> > >
> > > These two aren't used.
> > >
> > > > +
> > > > +#define BURST_SIZE_128 0
> > > > +#define BURST_SIZE_256 1
> > > > +#define BURST_SIZE_512 2
> > > > +
> > > > +/* Offsets from PCIE_INTR2_CPU_BASE */
> > > > +#define STATUS 0x0
> > > > +#define SET 0x4
> > > > +#define CLR 0x8
> > > > +#define MASK_STATUS 0xc
> > > > +#define MASK_SET 0x10
> > > > +#define MASK_CLR 0x14
> > >
> > > Some of the above are not used anywhere.
> > >
> > > > +
> > > > +#define PCIE_BUSNUM_SHIFT 20
> > > > +#define PCIE_SLOT_SHIFT 15
> > > > +#define PCIE_FUNC_SHIFT 12
> > > > +
> > > > +#if defined(__BIG_ENDIAN)
> > > > +#define DATA_ENDIAN 2 /* PCIe->DDR inbound traffic */
> > > > +#define MMIO_ENDIAN 2 /* CPU->PCIe outbound traffic */
> > > > +#else
> > > > +#define DATA_ENDIAN 0
> > > > +#define MMIO_ENDIAN 0
> > > > +#endif
> > > > +
> > > > +#define MDIO_PORT0 0x0
> > > > +#define MDIO_DATA_MASK 0x7fffffff
> > > > +#define MDIO_DATA_SHIFT 0x0
> > > > +#define MDIO_PORT_MASK 0xf0000
> > > > +#define MDIO_PORT_SHIFT 0x16
> > > > +#define MDIO_REGAD_MASK 0xffff
> > > > +#define MDIO_REGAD_SHIFT 0x0
> > > > +#define MDIO_CMD_MASK 0xfff00000
> > > > +#define MDIO_CMD_SHIFT 0x14
> > > > +#define MDIO_CMD_READ 0x1
> > > > +#define MDIO_CMD_WRITE 0x0
> > > > +#define MDIO_DATA_DONE_MASK 0x80000000
> > > > +#define MDIO_RD_DONE(x) (((x) & MDIO_DATA_DONE_MASK) ? 1 : 0)
> > > > +#define MDIO_WT_DONE(x) (((x) & MDIO_DATA_DONE_MASK) ? 0 : 1)
> > > > +#define SSC_REGS_ADDR 0x1100
> > > > +#define SET_ADDR_OFFSET 0x1f
> > > > +#define SSC_CNTL_OFFSET 0x2
> > > > +#define SSC_CNTL_OVRD_EN_MASK 0x8000
> > > > +#define SSC_CNTL_OVRD_EN_SHIFT 0xf
> > > > +#define SSC_CNTL_OVRD_VAL_MASK 0x4000
> > > > +#define SSC_CNTL_OVRD_VAL_SHIFT 0xe
> > > > +#define SSC_STATUS_OFFSET 0x1
> > > > +#define SSC_STATUS_SSC_MASK 0x400
> > > > +#define SSC_STATUS_SSC_SHIFT 0xa
> > > > +#define SSC_STATUS_PLL_LOCK_MASK 0x800
> > > > +#define SSC_STATUS_PLL_LOCK_SHIFT 0xb
> > > > +
> > > > +#define IDX_ADDR(pcie) \
> > > > + ((pcie)->reg_offsets[EXT_CFG_INDEX])
> > > > +#define DATA_ADDR(pcie) \
> > > > + ((pcie)->reg_offsets[EXT_CFG_DATA])
> > > > +#define PCIE_RGR1_SW_INIT_1(pcie) \
> > > > + ((pcie)->reg_offsets[RGR1_SW_INIT_1])
> > > > +
> > > > +enum {
> > > > + RGR1_SW_INIT_1,
> > > > + EXT_CFG_INDEX,
> > > > + EXT_CFG_DATA,
> > > > +};
> > > > +
> > > > +enum {
> > > > + RGR1_SW_INIT_1_INIT_MASK,
> > > > + RGR1_SW_INIT_1_INIT_SHIFT,
> > > > + RGR1_SW_INIT_1_PERST_MASK,
> > > > + RGR1_SW_INIT_1_PERST_SHIFT,
> > > > +};
> > > > +
> > > > +enum pcie_type {
> > > > + BCM2711,
> > > > +};
> > > > +
> > > > +struct brcm_window {
> > > > + dma_addr_t pcie_addr;
> > > > + phys_addr_t cpu_addr;
> > > > + dma_addr_t size;
> > > > +};
> > > > +
> > > > +/* Internal PCIe Host Controller Information.*/
> > > > +struct brcm_pcie {
> > > > + struct device *dev;
> > > > + void __iomem *base;
> > > > + int irq;
> > >
> > > 'irq' isn't used and can be removed.
> > >
> > > > + struct clk *clk;
> > > > + struct pci_bus *root_bus;
> > > > + struct device_node *dn;
> > > > + int id;
> > >
> > > 'id' isn't used and can be removed.
> > >
> > > > + bool suspended;
> > > > + bool ssc;
> > > > + int gen;
> > > > + struct brcm_window out_wins[BRCM_NUM_PCIE_OUT_WINS];
> > > > + unsigned int rev;
> > >
> > > 'rev' isn't used and can be removed.
> > >
> > > > + const int *reg_offsets;
> > > > + const int *reg_field_info;
> > > > + enum pcie_type type;
> > > > +};
> > > > +
> > > > +struct pcie_cfg_data {
> > > > + const int *reg_field_info;
> > > > + const int *offsets;
> > > > + const enum pcie_type type;
> > > > +};
> > > > +
> > > > +static const int pcie_reg_field_info[] = {
> > > > + [RGR1_SW_INIT_1_INIT_MASK] = 0x2,
> > > > + [RGR1_SW_INIT_1_INIT_SHIFT] = 0x1,
> > > > +};
> > > > +
> > > > +static const int pcie_offset_bcm2711[] = {
> > > > + [RGR1_SW_INIT_1] = 0x9210,
> > > > + [EXT_CFG_INDEX] = 0x9000,
> > > > + [EXT_CFG_DATA] = 0x8000,
> > > > +};
> > > > +
> > > > +static const struct pcie_cfg_data bcm2711_cfg = {
> > > > + .reg_field_info = pcie_reg_field_info,
> > > > + .offsets = pcie_offset_bcm2711,
> > > > + .type = BCM2711,
> > > > +};
> > > > +
> > > > +static void __iomem *brcm_pcie_map_conf(struct pci_bus *bus, unsigned int devfn,
> > > > + int where);
> > > > +
> > > > +static struct pci_ops brcm_pcie_ops = {
> > > > + .map_bus = brcm_pcie_map_conf,
> > > > + .read = pci_generic_config_read,
> > > > + .write = pci_generic_config_write,
> > > > +};
> > > > +
> > > > +#define bcm_readl(a) readl(a)
> > > > +#define bcm_writel(d, a) writel(d, a)
> > > > +#define bcm_readw(a) readw(a)
> > > > +#define bcm_writew(d, a) writew(d, a)
> > >
> > > Is there much value in these macros?
> > >
> > > > +
> > > > +/* These macros extract/insert fields to host controller's register set. */
> > > > +#define RD_FLD(base, reg, field) \
> > > > + rd_fld((base) + reg, reg##_##field##_MASK, reg##_##field##_SHIFT)
> > > > +#define WR_FLD(base, reg, field, val) \
> > > > + wr_fld((base) + reg, reg##_##field##_MASK, reg##_##field##_SHIFT, val)
> > > > +#define WR_FLD_RB(base, reg, field, val) \
> > > > + wr_fld_rb((base) + reg, reg##_##field##_MASK, \
> > > > + reg##_##field##_SHIFT, val)
> > > > +#define WR_FLD_WITH_OFFSET(base, off, reg, field, val) \
> > > > + wr_fld((base) + reg + (off), reg##_##field##_MASK, \
> > > > + reg##_##field##_SHIFT, val)
> > > > +#define EXTRACT_FIELD(val, reg, field) \
> > > > + (((val) & reg##_##field##_MASK) >> reg##_##field##_SHIFT)
> > > > +#define INSERT_FIELD(val, reg, field, field_val) \
> > > > + (((val) & ~reg##_##field##_MASK) | \
> > > > + (reg##_##field##_MASK & (field_val << reg##_##field##_SHIFT)))
> > > > +
> > > > +static u32 rd_fld(void __iomem *p, u32 mask, int shift)
> > > > +{
> > > > + return (bcm_readl(p) & mask) >> shift;
> > > > +}
> > > > +
> > > > +static void wr_fld(void __iomem *p, u32 mask, int shift, u32 val)
> > > > +{
> > > > + u32 reg = bcm_readl(p);
> > > > +
> > > > + reg = (reg & ~mask) | ((val << shift) & mask);
> > > > + bcm_writel(reg, p);
> > > > +}
> > > > +
> > > > +static void wr_fld_rb(void __iomem *p, u32 mask, int shift, u32 val)
> > > > +{
> > > > + wr_fld(p, mask, shift, val);
> > > > + (void)bcm_readl(p);
> > > > +}
> > > > +
> > > > +static const char *link_speed_to_str(int s)
> > > > +{
> > > > + switch (s) {
> > > > + case 1:
> > > > + return "2.5";
> > > > + case 2:
> > > > + return "5.0";
> > > > + case 3:
> > > > + return "8.0";
> > > > + default:
> > > > + break;
> > > > + }
> > > > + return "???";
> > > > +}
> > > > +
> > > > +/*
> > > > + * The roundup_pow_of_two() from log2.h invokes
> > > > + * __roundup_pow_of_two(unsigned long), but we really need a
> > > > + * such a function to take a native u64 since unsigned long
> > > > + * is 32 bits on some configurations. So we provide this helper
> > > > + * function below.
> > > > + */
> > > > +static u64 roundup_pow_of_two_64(u64 n)
> > > > +{
> > > > + return 1ULL << fls64(n - 1);
> > > > +}
> > >
> > > Given that you use this in one place and that it is a single line, I'd
> > > suggest you just drop this function. Alternatively if you wanted to add
> > > this function to log2.h then you already have a bunch of users ready to
> > > be migrated to it:
> > >
> > > $ git grep "<< fls64"
> > > arch/sparc/mm/init_64.c: m_end += pa_start & ~((1ul << fls64(m_mask)) - 1);
> > > drivers/net/ethernet/mellanox/mlx4/en_clock.c: u64 max_val_cycles_rounded = 1ULL << fls64(max_val_cycles - 1);
> > > drivers/pci/controller/pcie-cadence-ep.c: sz = 1ULL << fls64(sz - 1);
> > > drivers/pci/controller/pcie-cadence.c: u64 sz = 1ULL << fls64(size - 1);
> > > drivers/pci/controller/pcie-rockchip-ep.c: u64 sz = 1ULL << fls64(size - 1);
> > > drivers/pci/controller/pcie-rockchip-ep.c: sz = 1ULL << fls64(sz - 1);
> > >
> > >
> > > > +
> > > > +/*
> > > > + * This is to convert the size of the inbound "BAR" region to the
> > > > + * non-linear values of PCIE_X_MISC_RC_BAR[123]_CONFIG_LO.SIZE
> > > > + */
> > > > +int encode_ibar_size(u64 size)
> > > > +{
> > > > + int log2_in = ilog2(size);
> > > > +
> > > > + if (log2_in >= 12 && log2_in <= 15)
> > > > + /* Covers 4KB to 32KB (inclusive) */
> > > > + return (log2_in - 12) + 0x1c;
> > > > + else if (log2_in >= 16 && log2_in <= 37)
> > > > + /* Covers 64KB to 32GB, (inclusive) */
> > >
> > > 2^37 != 32GB?
> > Comment should be changed
> > /* Current chips implement 64KB to 32GB; allow up to 128GB for
> > future chips */
> > or the value should be changed:
> > s/37/35/;
> > >
> > > > + return log2_in - 15;
> > > > + /* Something is awry so disable */
> > > > + return 0;
> > > > +}
> > > > +
> > > > +static u32 mdio_form_pkt(int port, int regad, int cmd)
> > > > +{
> > > > + u32 pkt = 0;
> > > > +
> > > > + pkt |= (port << MDIO_PORT_SHIFT) & MDIO_PORT_MASK;
> > > > + pkt |= (regad << MDIO_REGAD_SHIFT) & MDIO_REGAD_MASK;
> > > > + pkt |= (cmd << MDIO_CMD_SHIFT) & MDIO_CMD_MASK;
> > > > +
> > > > + return pkt;
> > > > +}
> > > > +
> > > > +/* negative return value indicates error */
> > > > +static int mdio_read(void __iomem *base, u8 port, u8 regad)
> > > > +{
> > > > + int tries;
> > > > + u32 data;
> > > > +
> > > > + bcm_writel(mdio_form_pkt(port, regad, MDIO_CMD_READ),
> > > > + base + PCIE_RC_DL_MDIO_ADDR);
> > > > + bcm_readl(base + PCIE_RC_DL_MDIO_ADDR);
> > > > +
> > > > + data = bcm_readl(base + PCIE_RC_DL_MDIO_RD_DATA);
> > > > + for (tries = 0; !MDIO_RD_DONE(data) && tries < 10; tries++) {
> > > > + udelay(10);
> > > > + data = bcm_readl(base + PCIE_RC_DL_MDIO_RD_DATA);
> > > > + }
> > > > +
> > > > + return MDIO_RD_DONE(data)
> > > > + ? (data & MDIO_DATA_MASK) >> MDIO_DATA_SHIFT
> > > > + : -EIO;
> > > > +}
> > > > +
> > > > +/* negative return value indicates error */
> > > > +static int mdio_write(void __iomem *base, u8 port, u8 regad, u16 wrdata)
> > > > +{
> > > > + int tries;
> > > > + u32 data;
> > > > +
> > > > + bcm_writel(mdio_form_pkt(port, regad, MDIO_CMD_WRITE),
> > > > + base + PCIE_RC_DL_MDIO_ADDR);
> > > > + bcm_readl(base + PCIE_RC_DL_MDIO_ADDR);
> > > > + bcm_writel(MDIO_DATA_DONE_MASK | wrdata,
> > > > + base + PCIE_RC_DL_MDIO_WR_DATA);
> > > > +
> > > > + data = bcm_readl(base + PCIE_RC_DL_MDIO_WR_DATA);
> > > > + for (tries = 0; !MDIO_WT_DONE(data) && tries < 10; tries++) {
> > > > + udelay(10);
> > > > + data = bcm_readl(base + PCIE_RC_DL_MDIO_WR_DATA);
> > > > + }
> > > > +
> > > > + return MDIO_WT_DONE(data) ? 0 : -EIO;
> > > > +}
> > > > +
> > > > +/*
> > > > + * Configures device for Spread Spectrum Clocking (SSC) mode; a negative
> > > > + * return value indicates error.
> > > > + */
> > > > +static int set_ssc(void __iomem *base)
> > >
> > > Please prefix this with brcm_pcie_ (and other similar occurances)
> > >
> > > > +{
> > > > + int tmp;
> > > > + u16 wrdata;
> > > > + int pll, ssc;
> > > > +
> > > > + tmp = mdio_write(base, MDIO_PORT0, SET_ADDR_OFFSET, SSC_REGS_ADDR);
> > > > + if (tmp < 0)
> > > > + return tmp;
> > > > +
> > > > + tmp = mdio_read(base, MDIO_PORT0, SSC_CNTL_OFFSET);
> > > > + if (tmp < 0)
> > > > + return tmp;
> > > > +
> > > > + wrdata = INSERT_FIELD(tmp, SSC_CNTL_OVRD, EN, 1);
> > > > + wrdata = INSERT_FIELD(wrdata, SSC_CNTL_OVRD, VAL, 1);
> > > > + tmp = mdio_write(base, MDIO_PORT0, SSC_CNTL_OFFSET, wrdata);
> > > > + if (tmp < 0)
> > > > + return tmp;
> > > > +
> > > > + usleep_range(1000, 2000);
> > > > + tmp = mdio_read(base, MDIO_PORT0, SSC_STATUS_OFFSET);
> > > > + if (tmp < 0)
> > > > + return tmp;
> > > > +
> > > > + ssc = EXTRACT_FIELD(tmp, SSC_STATUS, SSC);
> > > > + pll = EXTRACT_FIELD(tmp, SSC_STATUS, PLL_LOCK);
> > > > +
> > > > + return (ssc && pll) ? 0 : -EIO;
> > > > +}
> > > > +
> > > > +/* Limits operation to a specific generation (1, 2, or 3) */
> > > > +static void set_gen(void __iomem *base, int gen)
> > > > +{
> > > > + u32 lnkcap = bcm_readl(base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKCAP);
> > > > + u16 lnkctl2 = bcm_readw(base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKCTL2);
> > > > +
> > > > + lnkcap = (lnkcap & ~PCI_EXP_LNKCAP_SLS) | gen;
> > > > + bcm_writel(lnkcap, base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKCAP);
> > > > +
> > > > + lnkctl2 = (lnkctl2 & ~0xf) | gen;
> > > > + bcm_writew(lnkctl2, base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKCTL2);
> > > > +}
> > > > +
> > > > +static void brcm_pcie_set_outbound_win(struct brcm_pcie *pcie,
> > > > + unsigned int win, phys_addr_t cpu_addr,
> > > > + dma_addr_t pcie_addr, dma_addr_t size)
> > > > +{
> > > > + void __iomem *base = pcie->base;
> > > > + phys_addr_t cpu_addr_mb, limit_addr_mb;
> > > > + u32 tmp;
> > > > +
> > > > + /* Set the base of the pcie_addr window */
> > > > + bcm_writel(lower_32_bits(pcie_addr) + MMIO_ENDIAN,
> > > > + base + PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LO + (win * 8));
> > > > + bcm_writel(upper_32_bits(pcie_addr),
> > > > + base + PCIE_MISC_CPU_2_PCIE_MEM_WIN0_HI + (win * 8));
> > > > +
> > > > + cpu_addr_mb = cpu_addr >> 20;
> > > > + limit_addr_mb = (cpu_addr + size - 1) >> 20;
> > > > +
> > > > + /* Write the addr base low register */
> > > > + WR_FLD_WITH_OFFSET(base, (win * 4),
> > > > + PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT,
> > > > + BASE, cpu_addr_mb);
> > > > + /* Write the addr limit low register */
> > > > + WR_FLD_WITH_OFFSET(base, (win * 4),
> > > > + PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT,
> > > > + LIMIT, limit_addr_mb);
> > > > +
> > > > + /* Write the cpu addr high register */
> > > > + tmp = (u32)(cpu_addr_mb >>
> > > > + PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_NUM_MASK_BITS);
> > > > + WR_FLD_WITH_OFFSET(base, (win * 8),
> > > > + PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI,
> > > > + BASE, tmp);
> > > > + /* Write the cpu limit high register */
> > > > + tmp = (u32)(limit_addr_mb >>
> > > > + PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_NUM_MASK_BITS);
> > > > + WR_FLD_WITH_OFFSET(base, (win * 8),
> > > > + PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI,
> > > > + LIMIT, tmp);
> > > > +}
> > > > +
> > > > +/* Configuration space read/write support */
> > > > +static int cfg_index(int busnr, int devfn, int reg)
> > > > +{
> > > > + return ((PCI_SLOT(devfn) & 0x1f) << PCIE_SLOT_SHIFT)
> > > > + | ((PCI_FUNC(devfn) & 0x07) << PCIE_FUNC_SHIFT)
> > > > + | (busnr << PCIE_BUSNUM_SHIFT)
> > > > + | (reg & ~3);
> > > > +}
> > > > +
> > > > +/* The controller is capable of serving in both RC and EP roles */
> > > > +static bool brcm_pcie_rc_mode(struct brcm_pcie *pcie)
> > > > +{
> > > > + void __iomem *base = pcie->base;
> > > > + u32 val = bcm_readl(base + PCIE_MISC_PCIE_STATUS);
> > > > +
> > > > + return !!EXTRACT_FIELD(val, PCIE_MISC_PCIE_STATUS, PCIE_PORT);
> > > > +}
> > > > +
> > > > +static bool brcm_pcie_link_up(struct brcm_pcie *pcie)
> > > > +{
> > > > + void __iomem *base = pcie->base;
> > > > + u32 val = bcm_readl(base + PCIE_MISC_PCIE_STATUS);
> > > > + u32 dla = EXTRACT_FIELD(val, PCIE_MISC_PCIE_STATUS, PCIE_DL_ACTIVE);
> > > > + u32 plu = EXTRACT_FIELD(val, PCIE_MISC_PCIE_STATUS, PCIE_PHYLINKUP);
> > > > +
> > > > + return (dla && plu) ? true : false;
> > > > +}
> > > > +
> > > > +static void __iomem *brcm_pcie_map_conf(struct pci_bus *bus, unsigned int devfn,
> > > > + int where)
> > > > +{
> > > > + struct brcm_pcie *pcie = bus->sysdata;
> > > > + void __iomem *base = pcie->base;
> > > > + int idx;
> > > > +
> > > > + /* Accesses to the RC go right to the RC registers if slot==0 */
> > > > + if (pci_is_root_bus(bus))
> > > > + return PCI_SLOT(devfn) ? NULL : base + where;
> > > > +
> > > > + /* For devices, write to the config space index register */
> > > > + idx = cfg_index(bus->number, devfn, 0);
> > > > + bcm_writel(idx, pcie->base + IDX_ADDR(pcie));
> > > > + return base + DATA_ADDR(pcie) + where;
> > > > +}
> > > > +
> > > > +static inline void brcm_pcie_bridge_sw_init_set(struct brcm_pcie *pcie,
> > > > + unsigned int val)
> > > > +{
> > > > + unsigned int shift = pcie->reg_field_info[RGR1_SW_INIT_1_INIT_SHIFT];
> > > > + u32 mask = pcie->reg_field_info[RGR1_SW_INIT_1_INIT_MASK];
> > > > +
> > > > + wr_fld_rb(pcie->base + PCIE_RGR1_SW_INIT_1(pcie), mask, shift, val);
> > > > +}
> > > > +
> > > > +static inline void brcm_pcie_perst_set(struct brcm_pcie *pcie,
> > > > + unsigned int val)
> > > > +{
> > > > + wr_fld_rb(pcie->base + PCIE_RGR1_SW_INIT_1(pcie),
> > > > + PCIE_RGR1_SW_INIT_1_PERST_MASK,
> > > > + PCIE_RGR1_SW_INIT_1_PERST_SHIFT, val);
> > > > +}
> > > > +
> > > > +static inline int brcm_pcie_get_rc_bar2_size_and_offset(struct brcm_pcie *pcie,
> > > > + u64 *rc_bar2_size,
> > > > + u64 *rc_bar2_offset)
> > > > +{
> > > > + struct pci_host_bridge *bridge = pci_host_bridge_from_priv(pcie);
> > > > + struct device *dev = pcie->dev;
> > > > + struct resource_entry *entry;
> > > > + u64 total_mem_size = 0;
> > > > +
> > > > + *rc_bar2_offset = -1;
> > > > +
> > > > + resource_list_for_each_entry(entry, &bridge->dma_ranges) {
> > > > + /*
> > > > + * We're promissed the RC will provide a contiguous view of
> > >
> > > s/promissed/promised/
> > >
> > > > + * memory to downstream devices. We can then infer the
> > > > + * rc_bar2_offset from the lower avaiable dma-range offset.
> > > > + */
> > > > + if (entry->offset < *rc_bar2_offset)
> > > > + *rc_bar2_offset = entry->offset;
> > > > +
> > > > + total_mem_size += entry->res->end - entry->res->start + 1;
> > > > + }
> > > > +
> > > > + *rc_bar2_size = roundup_pow_of_two_64(total_mem_size);
> > > > +
> > > > + /*
> > > > + * Validate the results:
> > > > + *
> > > > + * The PCIe host controller by design must set the inbound viewport to
> > > > + * be a contiguous arrangement of all of the system's memory. In
> > > > + * addition, its size mut be a power of two. To further complicate
> > > > + * matters, the viewport must start on a pcie-address that is aligned
> > > > + * on a multiple of its size. If a portion of the viewport does not
> > > > + * represent system memory -- e.g. 3GB of memory requires a 4GB
> > > > + * viewport -- we can map the outbound memory in or after 3GB and even
> > > > + * though the viewport will overlap the outbound memory the controller
> > > > + * will know to send outbound memory downstream and everything else
> > > > + * upstream.
> > > > + *
> > > > + * For example:
> > > > + *
> > > > + * - The best-case scenario, memory up to 3GB, is to place the inbound
> > > > + * region in the first 4GB of pcie-space, as some legacy devices can
> > > > + * only address 32bits. We would also like to put the MSI under 4GB
> > > > + * as well, since some devices require a 32bit MSI target address.
> > > > + *
> > > > + * - If the system memory is 4GB or larger we cannot start the inbound
> > > > + * region at location 0 (since we have to allow some space for
> > > > + * outbound memory @ 3GB). So instead it will start at the 1x
> > > > + * multiple of its size
> > > > + */
> > > > + if (!*rc_bar2_size || *rc_bar2_offset % *rc_bar2_size ||
> > > > + (*rc_bar2_offset < SZ_4G && *rc_bar2_offset > SZ_2G)) {
> > > > + dev_err(dev, "Invalid rc_bar2_offset/size: size 0x%llx, off 0x%llx\n",
> > > > + *rc_bar2_size, *rc_bar2_offset);
> > > > + return -EINVAL;
> > > > + }
> > > > +
> > > > + return 0;
> > > > +}
> > > > +
> > > > +static int brcm_pcie_setup(struct brcm_pcie *pcie)
> > > > +{
> > > > + struct pci_host_bridge *bridge = pci_host_bridge_from_priv(pcie);
> > > > + u64 rc_bar2_offset, rc_bar2_size;
> > > > + void __iomem *base = pcie->base;
> > > > + struct resource_entry *entry;
> > > > + unsigned int scb_size_val;
> > > > + struct resource *res;
> > > > + int num_out_wins = 0;
> > > > + u32 tmp;
> > > > + int i, j, ret, limit;
> > > > + u16 nlw, cls, lnksta;
> > > > + bool ssc_good = false;
> > > > + struct device *dev = pcie->dev;
> > > > +
> > > > + /* Reset the bridge */
> > > > + brcm_pcie_bridge_sw_init_set(pcie, 1);
> > > > +
> > > > + usleep_range(100, 200);
> > > > +
> > > > + /* Take the bridge out of reset */
> > > > + brcm_pcie_bridge_sw_init_set(pcie, 0);
> > > > +
> > > > + WR_FLD_RB(base, PCIE_MISC_HARD_PCIE_HARD_DEBUG, SERDES_IDDQ, 0);
> > > > + /* Wait for SerDes to be stable */
> > > > + usleep_range(100, 200);
> > > > +
> > > > + /* Grab the PCIe hw revision number */
> > > > + tmp = bcm_readl(base + PCIE_MISC_REVISION);
> > > > + pcie->rev = EXTRACT_FIELD(tmp, PCIE_MISC_REVISION, MAJMIN);
> > >
> > > This isn't used anywhere
> > >
> > > > +
> > > > + /* Set SCB_MAX_BURST_SIZE, CFG_READ_UR_MODE, SCB_ACCESS_EN */
> > > > + tmp = INSERT_FIELD(0, PCIE_MISC_MISC_CTRL, SCB_ACCESS_EN, 1);
> > > > + tmp = INSERT_FIELD(tmp, PCIE_MISC_MISC_CTRL, CFG_READ_UR_MODE, 1);
> > > > + tmp = INSERT_FIELD(tmp, PCIE_MISC_MISC_CTRL, MAX_BURST_SIZE,
> > > > + BURST_SIZE_128);
> > > > + bcm_writel(tmp, base + PCIE_MISC_MISC_CTRL);
> > > > +
> > > > + ret = brcm_pcie_get_rc_bar2_size_and_offset(pcie, &rc_bar2_size,
> > > > + &rc_bar2_offset);
> > > > + if (ret)
> > > > + return ret;
> > > > +
> > > > + tmp = lower_32_bits(rc_bar2_offset);
> > > > + tmp = INSERT_FIELD(tmp, PCIE_MISC_RC_BAR2_CONFIG_LO, SIZE,
> > > > + encode_ibar_size(rc_bar2_size));
> > > > + bcm_writel(tmp, base + PCIE_MISC_RC_BAR2_CONFIG_LO);
> > > > + bcm_writel(upper_32_bits(rc_bar2_offset),
> > > > + base + PCIE_MISC_RC_BAR2_CONFIG_HI);
> > > > +
> > > > + scb_size_val = rc_bar2_size ?
> > > > + ilog2(rc_bar2_size) - 15 : 0xf; /* 0xf is 1GB */
> > > > + WR_FLD(base, PCIE_MISC_MISC_CTRL, SCB0_SIZE, scb_size_val);
> > > > +
> > > > + /* disable the PCIe->GISB memory window (RC_BAR1) */
> > > > + WR_FLD(base, PCIE_MISC_RC_BAR1_CONFIG_LO, SIZE, 0);
> > > > +
> > > > + /* disable the PCIe->SCB memory window (RC_BAR3) */
> > > > + WR_FLD(base, PCIE_MISC_RC_BAR3_CONFIG_LO, SIZE, 0);
> > > > +
> > > > + if (!pcie->suspended) {
> > > > + /* clear any interrupts we find on boot */
> > > > + bcm_writel(0xffffffff, base + PCIE_INTR2_CPU_BASE + CLR);
> > > > + (void)bcm_readl(base + PCIE_INTR2_CPU_BASE + CLR);
> > > > + }
> > > > +
> > > > + /* Mask all interrupts since we are not handling any yet */
> > > > + bcm_writel(0xffffffff, base + PCIE_INTR2_CPU_BASE + MASK_SET);
> > > > + (void)bcm_readl(base + PCIE_INTR2_CPU_BASE + MASK_SET);
> > > > +
> > > > + if (pcie->gen)
> > > > + set_gen(base, pcie->gen);
> > > > +
> > > > + /* Unassert the fundamental reset */
> > > > + brcm_pcie_perst_set(pcie, 0);
> > > > +
> > > > + /*
> > > > + * Give the RC/EP time to wake up, before trying to configure RC.
> > > > + * Intermittently check status for link-up, up to a total of 100ms
> > > > + * when we don't know if the device is there, and up to 1000ms if
> > > > + * we do know the device is there.
> > > > + */
> > > > + limit = pcie->suspended ? 1000 : 100;
> > > > + for (i = 1, j = 0; j < limit && !brcm_pcie_link_up(pcie);
> > > > + j += i, i = i * 2)
> > > > + msleep(i + j > limit ? limit - j : i);
> > >
> > > Does it need to be this complex? Also waiting a second during resume seems
> > > like a long delay.
> >
> > Agree on the complexity issue. But we've had EP chips that required
> > this much time on a resume for reasons unknown. Code could be
> > changed to something like
> > for (i = 0; i <= limit; i += 100)
> > if (brcm_pcie_link_up(pcie)
> > break;
> > else
> > msleep(100);
>
> This is an improvement. If the reasons are unknown how are you confident that
> 1 second is enough?

IIRC, the biggest delay I ever observed on resume was ~600ms, so 1sec
seemed a reasonable compromise.. Sometimes customers select the
cheapest/oldest EP to do the job and their choice occasionally comes
with atypical behavior.

Thanks, Jim
>
> >
> > >
> > > > +
> > > > + if (!brcm_pcie_link_up(pcie)) {
> > > > + dev_info(dev, "link down\n");
> > > > + return -ENODEV;
> > > > + }
> > > > +
> > > > + if (!brcm_pcie_rc_mode(pcie)) {
> > > > + dev_err(dev, "PCIe misconfigured; is in EP mode\n");
> > > > + return -EINVAL;
> > > > + }
> > > > +
> > > > + resource_list_for_each_entry(entry, &bridge->windows) {
> > > > + res = entry->res;
> > > > +
> > > > + if (resource_type(res) != IORESOURCE_MEM)
> > > > + continue;
> > > > +
> > > > + if (num_out_wins >= BRCM_NUM_PCIE_OUT_WINS) {
> > > > + dev_err(pcie->dev, "too many outbound wins\n");
> > > > + return -EINVAL;
> > > > + }
> > > > +
> > > > + brcm_pcie_set_outbound_win(pcie, num_out_wins, res->start,
> > > > + res->start - entry->offset,
> > > > + res->end - res->start + 1);
> > > > + num_out_wins++;
> > > > + }
> > > > +
> > > > + /*
> > > > + * For config space accesses on the RC, show the right class for
> > > > + * a PCIe-PCIe bridge (the default setting is to be EP mode).
> > > > + */
> > > > + WR_FLD_RB(base, PCIE_RC_CFG_PRIV1_ID_VAL3, CLASS_CODE, 0x060400);
> > > > +
> > > > + if (pcie->ssc) {
> > > > + ret = set_ssc(base);
> > > > + if (ret == 0)
> > > > + ssc_good = true;
> > > > + else
> > > > + dev_err(dev, "failed attempt to enter ssc mode\n");
> > > > + }
> > > > +
> > > > + lnksta = bcm_readw(base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKSTA);
> > > > + cls = lnksta & PCI_EXP_LNKSTA_CLS;
> > > > + nlw = (lnksta & PCI_EXP_LNKSTA_NLW) >> PCI_EXP_LNKSTA_NLW_SHIFT;
> > > > + dev_info(dev, "link up, %s Gbps x%u %s\n", link_speed_to_str(cls),
> > > > + nlw, ssc_good ? "(SSC)" : "(!SSC)");
> > > > +
> > > > + /* PCIe->SCB endian mode for BAR */
> > > > + /* field ENDIAN_MODE_BAR2 = DATA_ENDIAN */
> > > > + WR_FLD_RB(base, PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1,
> > > > + ENDIAN_MODE_BAR2, DATA_ENDIAN);
> > > > +
> > > > + /*
> > > > + * Refclk from RC should be gated with CLKREQ# input when ASPM L0s,L1
> > > > + * is enabled => setting the CLKREQ_DEBUG_ENABLE field to 1.
> > > > + */
> > > > + WR_FLD_RB(base, PCIE_MISC_HARD_PCIE_HARD_DEBUG, CLKREQ_DEBUG_ENABLE, 1);
> > > > +
> > > > + return 0;
> > > > +}
> > > > +
> > > > +/* L23 is a low-power PCIe link state */
> > > > +static void enter_l23(struct brcm_pcie *pcie)
> > > > +{
> > > > + void __iomem *base = pcie->base;
> > > > + int l23, i;
> > > > +
> > > > + /* assert request for L23 */
> > > > + WR_FLD_RB(base, PCIE_MISC_PCIE_CTRL, PCIE_L23_REQUEST, 1);
> > > > +
> > > > + /* Wait up to 30 msec for L23 */
> > > > + l23 = RD_FLD(base, PCIE_MISC_PCIE_STATUS, PCIE_LINK_IN_L23);
> > > > + for (i = 0; i < 15 && !l23; i++) {
> > > > + usleep_range(2000, 2400);
> > > > + l23 = RD_FLD(base, PCIE_MISC_PCIE_STATUS, PCIE_LINK_IN_L23);
> > > > + }
> > > > +
> > > > + if (!l23)
> > > > + dev_err(pcie->dev, "failed to enter L23\n");
> > > > +}
> > > > +
> > > > +static void turn_off(struct brcm_pcie *pcie)
> > > > +{
> > > > + void __iomem *base = pcie->base;
> > > > +
> > > > + if (brcm_pcie_link_up(pcie))
> > > > + enter_l23(pcie);
> > > > + /* Assert fundamental reset */
> > > > + brcm_pcie_perst_set(pcie, 1);
> > > > + /* Deassert request for L23 in case it was asserted */
> > > > + WR_FLD_RB(base, PCIE_MISC_PCIE_CTRL, PCIE_L23_REQUEST, 0);
> > > > + /* Turn off SerDes */
> > > > + WR_FLD_RB(base, PCIE_MISC_HARD_PCIE_HARD_DEBUG, SERDES_IDDQ, 1);
> > > > + /* Shutdown PCIe bridge */
> > > > + brcm_pcie_bridge_sw_init_set(pcie, 1);
> > > > +}
> > > > +
> > > > +static int brcm_pcie_suspend(struct device *dev)
> > > > +{
> > > > + struct brcm_pcie *pcie = dev_get_drvdata(dev);
> > > > +
> > > > + turn_off(pcie);
> > > > + clk_disable_unprepare(pcie->clk);
> > > > + pcie->suspended = true;
> > > > +
> > > > + return 0;
> > > > +}
> > > > +
> > > > +static int brcm_pcie_resume(struct device *dev)
> > > > +{
> > > > + struct brcm_pcie *pcie = dev_get_drvdata(dev);
> > > > + void __iomem *base;
> > > > + int ret;
> > > > +
> > > > + base = pcie->base;
> > > > + clk_prepare_enable(pcie->clk);
> > > > +
> > > > + /* Take bridge out of reset so we can access the SerDes reg */
> > > > + brcm_pcie_bridge_sw_init_set(pcie, 0);
> > > > +
> > > > + /* Turn on SerDes */
> > > > + WR_FLD_RB(base, PCIE_MISC_HARD_PCIE_HARD_DEBUG, SERDES_IDDQ, 0);
> > > > + /* Wait for SerDes to be stable */
> > > > + usleep_range(100, 200);
> > > > +
> > > > + ret = brcm_pcie_setup(pcie);
> > > > + if (ret)
> > > > + return ret;
> > > > +
> > > > + pcie->suspended = false;
> > > > +
> > > > + return 0;
> > > > +}
> > > > +
> > > > +static void _brcm_pcie_remove(struct brcm_pcie *pcie)
> > >
> > > I don't see the value in the first underscore here.
> > We have a function _brcm_pcie_remove() and a function
> > brcm_pciie_remove(). The former is invoked by the latter, but the
> > former is also invoked later in the code as well.
>
> That's OK, missed this.
>
> Thanks,
>
> Andrew Murray
>
> >
> > Jim Quinlan
> > Broadcom
> >
> > >
> > > > +{
> > > > + turn_off(pcie);
> > > > + clk_disable_unprepare(pcie->clk);
> > > > + clk_put(pcie->clk);
> > > > +}
> > > > +
> > > > +static int brcm_pcie_remove(struct platform_device *pdev)
> > > > +{
> > > > + struct brcm_pcie *pcie = platform_get_drvdata(pdev);
> > > > +
> > > > + pci_stop_root_bus(pcie->root_bus);
> > > > + pci_remove_root_bus(pcie->root_bus);
> > > > + _brcm_pcie_remove(pcie);
> > > > +
> > > > + return 0;
> > > > +}
> > > > +
> > > > +static const struct of_device_id brcm_pcie_match[] = {
> > > > + { .compatible = "brcm,bcm2711-pcie", .data = &bcm2711_cfg },
> > > > + {},
> > > > +};
> > > > +MODULE_DEVICE_TABLE(of, brcm_pcie_match);
> > > > +
> > > > +static int brcm_pcie_probe(struct platform_device *pdev)
> > > > +{
> > > > + struct device_node *dn = pdev->dev.of_node;
> > > > + const struct of_device_id *of_id;
> > > > + const struct pcie_cfg_data *data;
> > > > + struct resource *res;
> > > > + int ret;
> > > > + struct brcm_pcie *pcie;
> > > > + void __iomem *base;
> > > > + struct pci_host_bridge *bridge;
> > > > + struct pci_bus *child;
> > > > +
> > > > + bridge = devm_pci_alloc_host_bridge(&pdev->dev, sizeof(*pcie));
> > > > + if (!bridge)
> > > > + return -ENOMEM;
> > > > +
> > > > + pcie = pci_host_bridge_priv(bridge);
> > > > +
> > > > + of_id = of_match_node(brcm_pcie_match, dn);
> > > > + if (!of_id) {
> > > > + dev_err(&pdev->dev, "failed to look up compatible string\n");
> > > > + return -EINVAL;
> > > > + }
> > > > +
> > > > + data = of_id->data;
> > >
> > > Can you replace the above (from of_match_node to here) with the following?
> > >
> > > data = of_device_get_match_data(pdev->dev)
> > >
> > > > + pcie->reg_offsets = data->offsets;
> > > > + pcie->reg_field_info = data->reg_field_info;
> > > > + pcie->type = data->type;
> > > > + pcie->dn = dn;
> > > > + pcie->dev = &pdev->dev;
> > > > +
> > > > + /* We use the domain number as our controller number */
> > > > + pcie->id = of_get_pci_domain_nr(dn);
> > > > + if (pcie->id < 0)
> > > > + return pcie->id;
> > >
> > > We don't do anything with this, so you can remove this.
> > >
> > > > +
> > > > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > > > + if (!res)
> > > > + return -EINVAL;
> > >
> > > The majority of controller drivers don't bother to check the return value
> > > here and just pass res into devm_ioremap_resource.
> > >
> > > > +
> > > > + base = devm_ioremap_resource(&pdev->dev, res);
> > > > + if (IS_ERR(base))
> > > > + return PTR_ERR(base);
> > > > +
> > > > + pcie->clk = of_clk_get_by_name(dn, "sw_pcie");
> > > > + if (IS_ERR(pcie->clk)) {
> > > > + dev_err(&pdev->dev, "could not get clock\n");
> > > > + pcie->clk = NULL;
> > > > + }
> > >
> > > Is this a good use-case for devm_clk_get_optional?
> > >
> > > > + pcie->base = base;
> > > > +
> > > > + ret = of_pci_get_max_link_speed(dn);
> > > > + pcie->gen = (ret < 0) ? 0 : ret;
> > >
> > > There is no checking that gen isn't too large here, given that we pass
> > > this into a register later we probably want to check it here.
> > >
> > > > +
> > > > + pcie->ssc = of_property_read_bool(dn, "brcm,enable-ssc");
> > > > +
> > > > + ret = irq_of_parse_and_map(pdev->dev.of_node, 0);
> > > > + if (ret == 0)
> > > > + /* keep going, as we don't use this intr yet */
> > > > + dev_warn(pcie->dev, "cannot get PCIe interrupt\n");
> > > > + else
> > > > + pcie->irq = ret;
> > >
> > > Given we don't use it yet, please remove it from this patch.
> > >
> > > > +
> > > > + ret = pci_parse_request_of_pci_ranges(pcie->dev, &bridge->windows,
> > > > + &bridge->dma_ranges, NULL);
> > > > + if (ret)
> > > > + return ret;
> > > > +
> > > > + ret = clk_prepare_enable(pcie->clk);
> > > > + if (ret) {
> > > > + dev_err(&pdev->dev, "could not enable clock\n");
> > > > + return ret;
> > > > + }
> > > > +
> > > > + ret = brcm_pcie_setup(pcie);
> > > > + if (ret)
> > > > + goto fail;
> > > > +
> > > > + bridge->dev.parent = &pdev->dev;
> > > > + bridge->busnr = 0;
> > > > + bridge->ops = &brcm_pcie_ops;
> > > > + bridge->sysdata = pcie;
> > > > + bridge->map_irq = of_irq_parse_and_map_pci;
> > > > + bridge->swizzle_irq = pci_common_swizzle;
> > > > +
> > > > + ret = pci_scan_root_bus_bridge(bridge);
> > > > + if (ret < 0) {
> > > > + dev_err(pcie->dev, "Scanning root bridge failed\n");
> > > > + goto fail;
> > > > + }
> > > > +
> > > > + pci_assign_unassigned_bus_resources(bridge->bus);
> > > > + list_for_each_entry(child, &bridge->bus->children, node)
> > > > + pcie_bus_configure_settings(child);
> > > > + pci_bus_add_devices(bridge->bus);
> > > > + platform_set_drvdata(pdev, pcie);
> > > > + pcie->root_bus = bridge->bus;
> > > > +
> > > > + return 0;
> > > > +
> > > > +fail:
> > > > + _brcm_pcie_remove(pcie);
> > > > + return ret;
> > > > +}
> > > > +
> > > > +static const struct dev_pm_ops brcm_pcie_pm_ops = {
> > > > + .suspend_noirq = brcm_pcie_suspend,
> > > > + .resume_noirq = brcm_pcie_resume,
> > > > +};
> > > > +
> > > > +static struct platform_driver brcm_pcie_driver = {
> > > > + .probe = brcm_pcie_probe,
> > > > + .remove = brcm_pcie_remove,
> > > > + .driver = {
> > > > + .name = "brcm-pcie",
> > > > + .owner = THIS_MODULE,
> > > > + .of_match_table = brcm_pcie_match,
> > > > + .pm = &brcm_pcie_pm_ops,
> > > > + },
> > > > +};
> > > > +
> > > > +module_platform_driver(brcm_pcie_driver);
> > > > +
> > > > +MODULE_LICENSE("GPL v2");
> > > > +MODULE_DESCRIPTION("Broadcom STB PCIe RC driver");
> > > > +MODULE_AUTHOR("Broadcom");
> > > > --
> > > > 2.23.0
> > > >

\
 
 \ /
  Last update: 2019-11-08 17:34    [W:0.091 / U:24.184 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site