lkml.org 
[lkml]   [2019]   [Nov]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH AUTOSEL 4.19 029/205] ath10k: limit available channels via DT ieee80211-freq-limit
Date
From: Sven Eckelmann <sven.eckelmann@openmesh.com>

[ Upstream commit 34d5629d2ca89d847b7040762b87964c696c14da ]

Tri-band devices (1x 2.4GHz + 2x 5GHz) often incorporate special filters in
the RX and TX path. These filtered channel can in theory still be used by
the hardware but the signal strength is reduced so much that it makes no
sense.

There is already a DT property to limit the available channels but ath10k
has to manually call this functionality to limit the currrently set wiphy
channels further.

Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath10k/mac.c | 2 ++
1 file changed, 2 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 1419f9d1505fe..9d033da46ec2e 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -18,6 +18,7 @@

#include "mac.h"

+#include <net/cfg80211.h>
#include <net/mac80211.h>
#include <linux/etherdevice.h>
#include <linux/acpi.h>
@@ -8363,6 +8364,7 @@ int ath10k_mac_register(struct ath10k *ar)
ar->hw->wiphy->bands[NL80211_BAND_5GHZ] = band;
}

+ wiphy_read_of_freq_limits(ar->hw->wiphy);
ath10k_mac_setup_ht_vht_cap(ar);

ar->hw->wiphy->interface_modes =
--
2.20.1
\
 
 \ /
  Last update: 2019-11-08 13:14    [W:0.159 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site