lkml.org 
[lkml]   [2019]   [Nov]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH AUTOSEL 4.19 040/205] ARM: dts: exynos: Use i2c-gpio for HDMI-DDC on Arndale
Date
From: Andrzej Hajda <a.hajda@samsung.com>

[ Upstream commit 620375c8fdf2f9f5110ed48d6c407cc4b7554f86 ]

HDMI-DDC for unknown reasons doesn't work with Exynos I2C controllers.
Fortunately i2c-gpio comes to the rescue.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/exynos5250-arndale.dts | 28 ++++++++++++++++-------
arch/arm/boot/dts/exynos5250-pinctrl.dtsi | 6 +++++
2 files changed, 26 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index 7a8a5c55701a8..bb3fcd652b5d7 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -150,7 +150,7 @@

&hdmi {
status = "okay";
- ddc = <&i2c_2>;
+ ddc = <&i2c_ddc>;
hpd-gpios = <&gpx3 7 GPIO_ACTIVE_LOW>;
vdd_osc-supply = <&ldo10_reg>;
vdd_pll-supply = <&ldo8_reg>;
@@ -452,13 +452,6 @@
};
};

-&i2c_2 {
- status = "okay";
- /* used by HDMI DDC */
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
-};
-
&i2c_3 {
status = "okay";

@@ -547,3 +540,22 @@
status = "okay";
samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
};
+
+&soc {
+ /*
+ * For unknown reasons HDMI-DDC does not work with Exynos I2C
+ * controllers. Lets use software I2C over GPIO pins as a workaround.
+ */
+ i2c_ddc: i2c-gpio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_gpio_bus>;
+ status = "okay";
+ compatible = "i2c-gpio";
+ gpios = <&gpa0 6 0 /* sda */
+ &gpa0 7 0 /* scl */
+ >;
+ i2c-gpio,delay-us = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+};
diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
index 6ff6dea29d449..b25d520393b8b 100644
--- a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
@@ -225,6 +225,12 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};

+ i2c2_gpio_bus: i2c2-gpio-bus {
+ samsung,pins = "gpa0-6", "gpa0-7";
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ };
+
uart2_data: uart2-data {
samsung,pins = "gpa1-0", "gpa1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
--
2.20.1
\
 
 \ /
  Last update: 2019-11-08 13:13    [W:0.546 / U:0.612 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site