lkml.org 
[lkml]   [2019]   [Nov]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH AUTOSEL 4.19 175/205] soc: qcom: geni: geni_se_clk_freq_match() should always accept multiples
Date
From: Douglas Anderson <dianders@chromium.org>

[ Upstream commit 867d4aa7013fdee8b962cde1711f96c8dd86d926 ]

The geni_se_clk_freq_match() has some strange semantics. Specifically
it is defined with two modes:
1. It can find a clock that's an exact multiple of the requested rate
2. It can find a non-exact match but it can't handle multiples then

...but callers should always be able to handle a clock that is a
multiple of the requested clock so mode #2 doesn't really make sense.
Let's change the semantics so that the non-exact match can also accept
multiples and then change the code to handle that.

The only caller of this code is the unlanded SPI driver [1] which
currently passes "exact = True", thus it should be safe to change the
semantics in this way. ...and, in fact, the SPI driver should likely
be modified to pass "exact = False" (with the new semantics) since
that will allow it to work with SPI devices that request a clock rate
that doesn't exactly match a rate we can make.

[1] https://lkml.kernel.org/r/1535107336-2214-1-git-send-email-dkota@codeaurora.org

Fixes: eddac5af0654 ("soc: qcom: Add GENI based QUP Wrapper driver")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/soc/qcom/qcom-geni-se.c | 37 ++++++++++++++++++++-------------
1 file changed, 22 insertions(+), 15 deletions(-)

diff --git a/drivers/soc/qcom/qcom-geni-se.c b/drivers/soc/qcom/qcom-geni-se.c
index 1b19b8428c4ac..ee89ffb6dde84 100644
--- a/drivers/soc/qcom/qcom-geni-se.c
+++ b/drivers/soc/qcom/qcom-geni-se.c
@@ -544,16 +544,17 @@ EXPORT_SYMBOL(geni_se_clk_tbl_get);
* @se: Pointer to the concerned serial engine.
* @req_freq: Requested clock frequency.
* @index: Index of the resultant frequency in the table.
- * @res_freq: Resultant frequency which matches or is closer to the
- * requested frequency.
+ * @res_freq: Resultant frequency of the source clock.
* @exact: Flag to indicate exact multiple requirement of the requested
* frequency.
*
- * This function is called by the protocol drivers to determine the matching
- * or exact multiple of the requested frequency, as provided by the serial
- * engine clock in order to meet the performance requirements. If there is
- * no matching or exact multiple of the requested frequency found, then it
- * selects the closest floor frequency, if exact flag is not set.
+ * This function is called by the protocol drivers to determine the best match
+ * of the requested frequency as provided by the serial engine clock in order
+ * to meet the performance requirements.
+ *
+ * If we return success:
+ * - if @exact is true then @res_freq / <an_integer> == @req_freq
+ * - if @exact is false then @res_freq / <an_integer> <= @req_freq
*
* Return: 0 on success, standard Linux error codes on failure.
*/
@@ -564,6 +565,9 @@ int geni_se_clk_freq_match(struct geni_se *se, unsigned long req_freq,
unsigned long *tbl;
int num_clk_levels;
int i;
+ unsigned long best_delta;
+ unsigned long new_delta;
+ unsigned int divider;

num_clk_levels = geni_se_clk_tbl_get(se, &tbl);
if (num_clk_levels < 0)
@@ -572,18 +576,21 @@ int geni_se_clk_freq_match(struct geni_se *se, unsigned long req_freq,
if (num_clk_levels == 0)
return -EINVAL;

- *res_freq = 0;
+ best_delta = ULONG_MAX;
for (i = 0; i < num_clk_levels; i++) {
- if (!(tbl[i] % req_freq)) {
+ divider = DIV_ROUND_UP(tbl[i], req_freq);
+ new_delta = req_freq - tbl[i] / divider;
+ if (new_delta < best_delta) {
+ /* We have a new best! */
*index = i;
*res_freq = tbl[i];
- return 0;
- }

- if (!(*res_freq) || ((tbl[i] > *res_freq) &&
- (tbl[i] < req_freq))) {
- *index = i;
- *res_freq = tbl[i];
+ /* If the new best is exact then we're done */
+ if (new_delta == 0)
+ return 0;
+
+ /* Record how close we got */
+ best_delta = new_delta;
}
}

--
2.20.1
\
 
 \ /
  Last update: 2019-11-08 13:04    [W:0.441 / U:0.648 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site