lkml.org 
[lkml]   [2019]   [Nov]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH AUTOSEL 4.4 40/44] pinctrl: at91: don't use the same irqchip with multiple gpiochips
Date
From: Ludovic Desroches <ludovic.desroches@microchip.com>

[ Upstream commit 0c3dfa176912b5f87732545598200fb55e9c1978 ]

Sharing the same irqchip with multiple gpiochips is not a good
practice. For instance, when installing hooks, we change the state
of the irqchip. The initial state of the irqchip for the second
gpiochip to register is then disrupted.

Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pinctrl/pinctrl-at91.c | 28 ++++++++++++++--------------
1 file changed, 14 insertions(+), 14 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
index 0d2fc0cff35ee..52bbd34f7d0d9 100644
--- a/drivers/pinctrl/pinctrl-at91.c
+++ b/drivers/pinctrl/pinctrl-at91.c
@@ -1556,16 +1556,6 @@ void at91_pinctrl_gpio_resume(void)
#define gpio_irq_set_wake NULL
#endif /* CONFIG_PM */

-static struct irq_chip gpio_irqchip = {
- .name = "GPIO",
- .irq_ack = gpio_irq_ack,
- .irq_disable = gpio_irq_mask,
- .irq_mask = gpio_irq_mask,
- .irq_unmask = gpio_irq_unmask,
- /* .irq_set_type is set dynamically */
- .irq_set_wake = gpio_irq_set_wake,
-};
-
static void gpio_irq_handler(struct irq_desc *desc)
{
struct irq_chip *chip = irq_desc_get_chip(desc);
@@ -1608,12 +1598,22 @@ static int at91_gpio_of_irq_setup(struct platform_device *pdev,
struct gpio_chip *gpiochip_prev = NULL;
struct at91_gpio_chip *prev = NULL;
struct irq_data *d = irq_get_irq_data(at91_gpio->pioc_virq);
+ struct irq_chip *gpio_irqchip;
int ret, i;

+ gpio_irqchip = devm_kzalloc(&pdev->dev, sizeof(*gpio_irqchip), GFP_KERNEL);
+ if (!gpio_irqchip)
+ return -ENOMEM;
+
at91_gpio->pioc_hwirq = irqd_to_hwirq(d);

- /* Setup proper .irq_set_type function */
- gpio_irqchip.irq_set_type = at91_gpio->ops->irq_type;
+ gpio_irqchip->name = "GPIO";
+ gpio_irqchip->irq_ack = gpio_irq_ack;
+ gpio_irqchip->irq_disable = gpio_irq_mask;
+ gpio_irqchip->irq_mask = gpio_irq_mask;
+ gpio_irqchip->irq_unmask = gpio_irq_unmask;
+ gpio_irqchip->irq_set_wake = gpio_irq_set_wake,
+ gpio_irqchip->irq_set_type = at91_gpio->ops->irq_type;

/* Disable irqs of this PIO controller */
writel_relaxed(~0, at91_gpio->regbase + PIO_IDR);
@@ -1624,7 +1624,7 @@ static int at91_gpio_of_irq_setup(struct platform_device *pdev,
* interrupt.
*/
ret = gpiochip_irqchip_add(&at91_gpio->chip,
- &gpio_irqchip,
+ gpio_irqchip,
0,
handle_edge_irq,
IRQ_TYPE_EDGE_BOTH);
@@ -1642,7 +1642,7 @@ static int at91_gpio_of_irq_setup(struct platform_device *pdev,
if (!gpiochip_prev) {
/* Then register the chain on the parent IRQ */
gpiochip_set_chained_irqchip(&at91_gpio->chip,
- &gpio_irqchip,
+ gpio_irqchip,
at91_gpio->pioc_virq,
gpio_irq_handler);
return 0;
--
2.20.1
\
 
 \ /
  Last update: 2019-11-08 12:50    [W:0.123 / U:23.144 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site