lkml.org 
[lkml]   [2019]   [Nov]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH AUTOSEL 4.19 119/205] ARM: dts: exynos: Disable pull control for PMIC IRQ line on Artik5 board
Date
From: Marek Szyprowski <m.szyprowski@samsung.com>

[ Upstream commit 62623718fd31d08b26ebea6c8b40f24924153ab7 ]

S2MPS14 PMIC interrupt line on Exynos3250-based Artik5 evaluation board
has external pull-up resistors, so disable any pull control for it in
controller node. This fixes support for S2MPS14 PMIC interrupts and
enables operation of wakeup from S2MPS14 RTC alarm.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/exynos3250-artik5.dtsi | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi
index 620b50c19ead9..7c22cbf6f3d41 100644
--- a/arch/arm/boot/dts/exynos3250-artik5.dtsi
+++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi
@@ -69,6 +69,8 @@
compatible = "samsung,s2mps14-pmic";
interrupt-parent = <&gpx3>;
interrupts = <5 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&s2mps14_irq>;
reg = <0x66>;

s2mps14_osc: clocks {
@@ -350,6 +352,11 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV3>;
samsung,pin-val = <1>;
};
+
+ s2mps14_irq: s2mps14-irq {
+ samsung,pins = "gpx3-5";
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
};

&rtc {
--
2.20.1
\
 
 \ /
  Last update: 2019-11-08 12:41    [W:0.477 / U:5.888 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site