lkml.org 
[lkml]   [2019]   [Nov]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v7 03/11] iommu/vt-d: Add custom allocator for IOASID
Date
Hi Jacob,

On 10/24/19 9:54 PM, Jacob Pan wrote:
> When VT-d driver runs in the guest, PASID allocation must be
> performed via virtual command interface. This patch registers a
> custom IOASID allocator which takes precedence over the default
> XArray based allocator. The resulting IOASID allocation will always
> come from the host. This ensures that PASID namespace is system-
> wide.
>
> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
> Signed-off-by: Liu, Yi L <yi.l.liu@intel.com>
> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
> ---
> drivers/iommu/Kconfig | 1 +
> drivers/iommu/intel-iommu.c | 67 +++++++++++++++++++++++++++++++++++++++++++++
> include/linux/intel-iommu.h | 2 ++
> 3 files changed, 70 insertions(+)
>
> diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
> index fd50ddffffbf..961fe5795a90 100644
> --- a/drivers/iommu/Kconfig
> +++ b/drivers/iommu/Kconfig
> @@ -211,6 +211,7 @@ config INTEL_IOMMU_SVM
> bool "Support for Shared Virtual Memory with Intel IOMMU"
> depends on INTEL_IOMMU && X86
> select PCI_PASID
> + select IOASID
> select MMU_NOTIFIER
> help
> Shared Virtual Memory (SVM) provides a facility for devices
> diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c
> index 3f974919d3bd..ced1d89ef977 100644
> --- a/drivers/iommu/intel-iommu.c
> +++ b/drivers/iommu/intel-iommu.c
> @@ -1706,6 +1706,9 @@ static void free_dmar_iommu(struct intel_iommu *iommu)
> if (ecap_prs(iommu->ecap))
> intel_svm_finish_prq(iommu);
> }
> + if (ecap_vcs(iommu->ecap) && vccap_pasid(iommu->vccap))
> + ioasid_unregister_allocator(&iommu->pasid_allocator);
> +
> #endif
> }
>
> @@ -4910,6 +4913,44 @@ static int __init probe_acpi_namespace_devices(void)
> return 0;
> }
>
> +#ifdef CONFIG_INTEL_IOMMU_SVM
> +static ioasid_t intel_ioasid_alloc(ioasid_t min, ioasid_t max, void *data)
> +{
> + struct intel_iommu *iommu = data;
> + ioasid_t ioasid;
> +
> + /*
> + * VT-d virtual command interface always uses the full 20 bit
> + * PASID range. Host can partition guest PASID range based on
> + * policies but it is out of guest's control.
> + */
> + if (min < PASID_MIN || max > intel_pasid_max_id)> + return INVALID_IOASID;

> +
> + if (vcmd_alloc_pasid(iommu, &ioasid))
> + return INVALID_IOASID;
> +
> + return ioasid;
> +}
> +
> +static void intel_ioasid_free(ioasid_t ioasid, void *data)
> +{
> + struct intel_iommu *iommu = data;
> +
> + if (!iommu)
> + return;
> + /*
> + * Sanity check the ioasid owner is done at upper layer, e.g. VFIO
> + * We can only free the PASID when all the devices are unbond.
> + */
> + if (ioasid_find(NULL, ioasid, NULL)) {
> + pr_alert("Cannot free active IOASID %d\n", ioasid);
> + return;
> + }
> + vcmd_free_pasid(iommu, ioasid);
> +}
> +#endif
> +
> int __init intel_iommu_init(void)
> {
> int ret = -ENODEV;
> @@ -5020,6 +5061,32 @@ int __init intel_iommu_init(void)
> "%s", iommu->name);
> iommu_device_set_ops(&iommu->iommu, &intel_iommu_ops);
> iommu_device_register(&iommu->iommu);
> +#ifdef CONFIG_INTEL_IOMMU_SVM
> + if (ecap_vcs(iommu->ecap) && vccap_pasid(iommu->vccap)) {
> + pr_info("Register custom PASID allocator\n");
> + /*
> + * Register a custom ASID allocator if we are running
> + * in a guest, the purpose is to have a system wide PASID
> + * namespace among all PASID users.
> + * There can be multiple vIOMMUs in each guest but only
> + * one allocator is active. All vIOMMU allocators will
> + * eventually be calling the same host allocator.
> + */
> + iommu->pasid_allocator.alloc = intel_ioasid_alloc;
> + iommu->pasid_allocator.free = intel_ioasid_free;
> + iommu->pasid_allocator.pdata = (void *)iommu;
> + ret = ioasid_register_allocator(&iommu->pasid_allocator);
> + if (ret) {
> + pr_warn("Custom PASID allocator registeration failed\n");
nit: registration
> + /*
> + * Disable scalable mode on this IOMMU if there
> + * is no custom allocator. Mixing SM capable vIOMMU
> + * and non-SM vIOMMU are not supported:
nit; is not supported. But I guess you will reshape it according to
previous comments.
> + */
> + intel_iommu_sm = 0;
> + }
> + }
> +#endif
> }
>
> bus_set_iommu(&pci_bus_type, &intel_iommu_ops);
> diff --git a/include/linux/intel-iommu.h b/include/linux/intel-iommu.h
> index 1d4b8dcdc5d8..c624733cb2e6 100644
> --- a/include/linux/intel-iommu.h
> +++ b/include/linux/intel-iommu.h
> @@ -19,6 +19,7 @@
> #include <linux/iommu.h>
> #include <linux/io-64-nonatomic-lo-hi.h>
> #include <linux/dmar.h>
> +#include <linux/ioasid.h>
>
> #include <asm/cacheflush.h>
> #include <asm/iommu.h>
> @@ -546,6 +547,7 @@ struct intel_iommu {
> #ifdef CONFIG_INTEL_IOMMU_SVM
> struct page_req_dsc *prq;
> unsigned char prq_name[16]; /* Name for PRQ interrupt */
> + struct ioasid_allocator_ops pasid_allocator; /* Custom allocator for PASIDs */
> #endif
> struct q_inval *qi; /* Queued invalidation info */
> u32 *iommu_state; /* Store iommu states between suspend and resume.*/
>

Thanks

Eric

\
 
 \ /
  Last update: 2019-11-08 11:41    [W:0.324 / U:31.776 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site