lkml.org 
[lkml]   [2019]   [Nov]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] dt-bindings: net: dwmac: Convert stm32 dwmac to DT schema
Date
Convert stm32 dwmac to DT schema.

Signed-off-by: Christophe Roullier <christophe.roullier@st.com>
---
.../devicetree/bindings/net/stm32-dwmac.txt | 44 -----
.../devicetree/bindings/net/stm32-dwmac.yaml | 161 ++++++++++++++++++
2 files changed, 161 insertions(+), 44 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/net/stm32-dwmac.txt
create mode 100644 Documentation/devicetree/bindings/net/stm32-dwmac.yaml

diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.txt b/Documentation/devicetree/bindings/net/stm32-dwmac.txt
deleted file mode 100644
index a90eef11dc46..000000000000
--- a/Documentation/devicetree/bindings/net/stm32-dwmac.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-STMicroelectronics STM32 / MCU DWMAC glue layer controller
-
-This file documents platform glue layer for stmmac.
-Please see stmmac.txt for the other unchanged properties.
-
-The device node has following properties.
-
-Required properties:
-- compatible: For MCU family should be "st,stm32-dwmac" to select glue, and
- "snps,dwmac-3.50a" to select IP version.
- For MPU family should be "st,stm32mp1-dwmac" to select
- glue, and "snps,dwmac-4.20a" to select IP version.
-- clocks: Must contain a phandle for each entry in clock-names.
-- clock-names: Should be "stmmaceth" for the host clock.
- Should be "mac-clk-tx" for the MAC TX clock.
- Should be "mac-clk-rx" for the MAC RX clock.
- For MPU family need to add also "ethstp" for power mode clock
-- interrupt-names: Should contain a list of interrupt names corresponding to
- the interrupts in the interrupts property, if available.
- Should be "macirq" for the main MAC IRQ
- Should be "eth_wake_irq" for the IT which wake up system
-- st,syscon : Should be phandle/offset pair. The phandle to the syscon node which
- encompases the glue register, and the offset of the control register.
-
-Optional properties:
-- clock-names: For MPU family "eth-ck" for PHY without quartz
-- st,eth-clk-sel (boolean) : set this property in RGMII PHY when you want to select RCC clock instead of ETH_CLK125.
-- st,eth-ref-clk-sel (boolean) : set this property in RMII mode when you have PHY without crystal 50MHz and want to select RCC clock instead of ETH_REF_CLK.
-
-Example:
-
- ethernet@40028000 {
- compatible = "st,stm32-dwmac", "snps,dwmac-3.50a";
- reg = <0x40028000 0x8000>;
- reg-names = "stmmaceth";
- interrupts = <0 61 0>, <0 62 0>;
- interrupt-names = "macirq", "eth_wake_irq";
- clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx";
- clocks = <&rcc 0 25>, <&rcc 0 26>, <&rcc 0 27>;
- st,syscon = <&syscfg 0x4>;
- snps,pbl = <8>;
- snps,mixed-burst;
- dma-ranges;
- };
diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
new file mode 100644
index 000000000000..eb0fd831f59d
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
@@ -0,0 +1,161 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 BayLibre, SAS
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/net/stm32-dwmac.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: STMicroelectronics STM32 / MCU DWMAC glue layer controller
+
+maintainers:
+ - Alexandre Torgue <alexandre.torgue@st.com>
+ - Christophe Roullier <christophe.roullier@st.com>
+
+description:
+ This file documents platform glue layer for stmmac.
+
+# We need a select here so we don't match all nodes with 'snps,dwmac'
+select:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - st,stm32-dwmac
+ - st,stm32mp1-dwmac
+ required:
+ - compatible
+
+allOf:
+ - $ref: "snps,dwmac.yaml#"
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - st,stm32-dwmac
+ - st,stm32mp1-dwmac
+ then:
+ properties:
+ clocks:
+ minItems: 3
+ maxItems: 5
+ items:
+ - description: GMAC main clock
+ - description: MAC TX clock
+ - description: MAC RX clock
+ - description: For MPU family, used for power mode
+ - description: For MPU family, used for PHY without quartz
+
+ clock-names:
+ minItems: 3
+ maxItems: 5
+ contains:
+ enum:
+ - stmmaceth
+ - mac-clk-tx
+ - mac-clk-rx
+ - ethstp
+ - eth-ck
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - st,stm32mp1-dwmac
+ - const: snps,dwmac-4.20a
+ - items:
+ - enum:
+ - st,stm32-dwmac
+ - const: snps,dwmac-4.10a
+ - items:
+ - enum:
+ - st,stm32-dwmac
+ - const: snps,dwmac-3.50a
+
+ st,syscon:
+ allOf:
+ - $ref: "/schemas/types.yaml#/definitions/phandle-array"
+ description:
+ Should be phandle/offset pair. The phandle to the syscon node which
+ encompases the glue register, and the offset of the control register
+
+ st,eth-clk-sel:
+ description:
+ set this property in RGMII PHY when you want to select RCC clock instead of ETH_CLK125.
+ type: boolean
+
+ st,eth-ref-clk-sel:
+ description:
+ set this property in RMII mode when you have PHY without crystal 50MHz and want to select RCC clock instead of ETH_REF_CLK.
+ type: boolean
+
+required:
+ - compatible
+ - clocks
+ - clock-names
+ - st,syscon
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/stm32mp1-clks.h>
+ #include <dt-bindings/reset/stm32mp1-resets.h>
+ #include <dt-bindings/mfd/stm32h7-rcc.h>
+ //Example 1
+ ethernet0: ethernet@5800a000 {
+ compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a";
+ reg = <0x5800a000 0x2000>;
+ reg-names = "stmmaceth";
+ interrupts = <&intc GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ clock-names = "stmmaceth",
+ "mac-clk-tx",
+ "mac-clk-rx",
+ "ethstp",
+ "eth-ck";
+ clocks = <&rcc ETHMAC>,
+ <&rcc ETHTX>,
+ <&rcc ETHRX>,
+ <&rcc ETHSTP>,
+ <&rcc ETHCK_K>;
+ st,syscon = <&syscfg 0x4>;
+ snps,pbl = <2>;
+ snps,axi-config = <&stmmac_axi_config_0>;
+ snps,tso;
+ status = "disabled";
+ phy-mode = "rgmii";
+ };
+
+ //Example 1 (MCU example)
+ ethernet1: ethernet@40028000 {
+ compatible = "st,stm32-dwmac", "snps,dwmac-3.50a";
+ reg = <0x40028000 0x8000>;
+ reg-names = "stmmaceth";
+ interrupts = <0 61 0>, <0 62 0>;
+ interrupt-names = "macirq", "eth_wake_irq";
+ clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx";
+ clocks = <&rcc 0 25>, <&rcc 0 26>, <&rcc 0 27>;
+ st,syscon = <&syscfg 0x4>;
+ snps,pbl = <8>;
+ snps,mixed-burst;
+ dma-ranges;
+ phy-mode = "mii";
+ };
+
+ //Example 2
+ ethernet2: ethernet@40027000 {
+ compatible = "st,stm32-dwmac", "snps,dwmac-4.10a";
+ reg = <0x40028000 0x8000>;
+ reg-names = "stmmaceth";
+ interrupts = <61>;
+ interrupt-names = "macirq";
+ clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx";
+ clocks = <&rcc 62>, <&rcc 61>, <&rcc 60>;
+ st,syscon = <&syscfg 0x4>;
+ snps,pbl = <8>;
+ status = "disabled";
+ phy-mode = "mii";
+ };
+
+
--
2.17.1
\
 
 \ /
  Last update: 2019-11-08 11:36    [W:0.087 / U:1.940 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site