lkml.org 
[lkml]   [2019]   [Nov]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v9 11/22] clk: tegra: clk-dfll: Add suspend and resume support
Date
Quoting Sowjanya Komatineni (2019-08-16 12:41:56)
> diff --git a/drivers/clk/tegra/clk-dfll.c b/drivers/clk/tegra/clk-dfll.c
> index f8688c2ddf1a..c051d92c2bbf 100644
> --- a/drivers/clk/tegra/clk-dfll.c
> +++ b/drivers/clk/tegra/clk-dfll.c
> @@ -1487,6 +1487,7 @@ static int dfll_init(struct tegra_dfll *td)
> td->last_unrounded_rate = 0;
>
> pm_runtime_enable(td->dev);
> + pm_runtime_irq_safe(td->dev);

Why irq_safe? It would be good to mention it in the commit text or
something.

> pm_runtime_get_sync(td->dev);
>
> dfll_set_mode(td, DFLL_DISABLED);
> @@ -1513,6 +1514,61 @@ static int dfll_init(struct tegra_dfll *td)
> return ret;
> }
>
> +/**
> + * tegra_dfll_suspend - check DFLL is disabled
> + * @dev: DFLL device *
> + *
> + * DFLL clock should be disabled by the CPUFreq driver. So, make
> + * sure it is disabled and disable all clocks needed by the DFLL.
> + */
> +int tegra_dfll_suspend(struct device *dev)
> +{
> + struct tegra_dfll *td = dev_get_drvdata(dev);
> +
> + if (dfll_is_running(td)) {
> + dev_err(td->dev, "DFLL still enabled while suspending\n");
> + return -EBUSY;
> + }
> +
> + reset_control_assert(td->dvco_rst);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(tegra_dfll_suspend);
> +
> +/**
> + * tegra_dfll_resume - reinitialize DFLL on resume
> + * @dev: DFLL instance

I prefer this description for tegra_dfll_suspend's 'dev' argument.

> + *
> + * DFLL is disabled and reset during suspend and resume.
> + * So, reinitialize the DFLL IP block back for use.
> + * DFLL clock is enabled later in closed loop mode by CPUFreq
> + * driver before switching its clock source to DFLL output.
> + */
> +int tegra_dfll_resume(struct device *dev)
> +{
> + struct tegra_dfll *td = dev_get_drvdata(dev);
> +
> + reset_control_deassert(td->dvco_rst);
> +
> + pm_runtime_get_sync(td->dev);
> +
> + dfll_set_mode(td, DFLL_DISABLED);
> + dfll_set_default_params(td);

\
 
 \ /
  Last update: 2019-11-08 22:20    [W:0.148 / U:1.092 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site