lkml.org 
[lkml]   [2019]   [Nov]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [EXT] RE: [v6 2/2] clk: ls1028a: Add clock driver for Display output interface
On Thu, Nov 7, 2019 at 8:21 PM Wen He <wen.he_1@nxp.com> wrote:
>
>
>
> > -----Original Message-----
> > From: Stephen Boyd <sboyd@kernel.org>
> > Sent: 2019年11月8日 6:58
> > To: Leo Li <leoyang.li@nxp.com>; Mark Rutland <mark.rutland@arm.com>;
> > Michael Turquette <mturquette@baylibre.com>; Rob Herring
> > <robh+dt@kernel.org>; Wen He <wen.he_1@nxp.com>;
> > devicetree@vger.kernel.org; linux-clk@vger.kernel.org;
> > linux-devel@linux.nxdi.nxp.com; linux-kernel@vger.kernel.org
> > Subject: [EXT] RE: [v6 2/2] clk: ls1028a: Add clock driver for Display output
> > interface
> >
> > Caution: EXT Email
> >
> > Quoting Wen He (2019-11-06 19:13:48)
> > >
> > > > > diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index
> > > > > 0138fb14e6f8..d23b7464aba8 100644
> > > > > --- a/drivers/clk/Makefile
> > > > > +++ b/drivers/clk/Makefile
> > > > > @@ -45,6 +45,7 @@ obj-$(CONFIG_COMMON_CLK_OXNAS)
> > +=
> > > > > clk-oxnas.o
> > > > > obj-$(CONFIG_COMMON_CLK_PALMAS) += clk-palmas.o
> > > > > obj-$(CONFIG_COMMON_CLK_PWM) += clk-pwm.o
> > > > > obj-$(CONFIG_CLK_QORIQ) += clk-qoriq.o
> > > > > +obj-$(CONFIG_CLK_LS1028A_PLLDIG) += clk-plldig.o
> > > >
> > > > Wrong ordering. This section of Makefile requires ordering by
> > > > driver file
> > > > name:
> > > >
> > > > # hardware specific clock types
> > > > # please keep this section sorted lexicographically by file path
> > > > name
> > > >
> > >
> > > Hi Leo,
> > >
> > > Stephen once suggest the Kconfig variable name should be given a more
> > > specific name like CLK_LS1028A_PLLDIG, so I have to changed it.
> > >
> > > Hi Stephen,
> > >
> > > How do you think?
> > >
> >
> >
> > Config name looks fine to me, but you haven't sorted this based on the file
> > name, i.e. clk-plldig.o, so please insert this in the right place in this file.
>
> Wow, Understand now..
>
> Should be sort this file like below, right?
> obj-$(CONFIG_COMMON_CLK_PWM) += clk-pwm.o
> obj-$(CONFIG_CLK_LS1028A_PLLDIG) += clk-plldig.o
> obj-$(CONFIG_CLK_QORIQ) += clk-qoriq.o

No. The correct order should be:
clk-plldig.o
clk-pwm.o
clk-qoriq.o

Regards,
Leo

\
 
 \ /
  Last update: 2019-11-08 21:22    [W:0.079 / U:3.244 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site