lkml.org 
[lkml]   [2019]   [Nov]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.3 047/140] arm64: dts: imx8mq: Use correct clock for usdhcs ipg clk
Date
From: Anson Huang <Anson.Huang@nxp.com>

[ Upstream commit b0759297f2c8dda455ff78a1d1ac95e261300ae3 ]

On i.MX8MQ, usdhc's ipg clock is from IMX8MQ_CLK_IPG_ROOT,
assign it explicitly instead of using IMX8MQ_CLK_DUMMY.

Fixes: 748f908cc882 ("arm64: add basic DTS for i.MX8MQ")
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/freescale/imx8mq.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index d1f4eb197af26..32c270c4c22b8 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -782,7 +782,7 @@
"fsl,imx7d-usdhc";
reg = <0x30b40000 0x10000>;
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MQ_CLK_DUMMY>,
+ clocks = <&clk IMX8MQ_CLK_IPG_ROOT>,
<&clk IMX8MQ_CLK_NAND_USDHC_BUS>,
<&clk IMX8MQ_CLK_USDHC1_ROOT>;
clock-names = "ipg", "ahb", "per";
@@ -799,7 +799,7 @@
"fsl,imx7d-usdhc";
reg = <0x30b50000 0x10000>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MQ_CLK_DUMMY>,
+ clocks = <&clk IMX8MQ_CLK_IPG_ROOT>,
<&clk IMX8MQ_CLK_NAND_USDHC_BUS>,
<&clk IMX8MQ_CLK_USDHC2_ROOT>;
clock-names = "ipg", "ahb", "per";
--
2.20.1


\
 
 \ /
  Last update: 2019-11-08 20:15    [W:0.346 / U:2.300 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site