lkml.org 
[lkml]   [2019]   [Nov]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.3 131/140] net: phy: bcm7xxx: define soft_reset for 40nm EPHY
Date
From: Doug Berger <opendmb@gmail.com>

[ Upstream commit fe586b823372a9f43f90e2c6aa0573992ce7ccb7 ]

The internal 40nm EPHYs use a "Workaround for putting the PHY in
IDDQ mode." These PHYs require a soft reset to restore functionality
after they are powered back up.

This commit defines the soft_reset function to use genphy_soft_reset
during phy_init_hw to accommodate this.

Fixes: 6e2d85ec0559 ("net: phy: Stop with excessive soft reset")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/phy/bcm7xxx.c | 1 +
1 file changed, 1 insertion(+)

--- a/drivers/net/phy/bcm7xxx.c
+++ b/drivers/net/phy/bcm7xxx.c
@@ -572,6 +572,7 @@ static int bcm7xxx_28nm_probe(struct phy
.name = _name, \
/* PHY_BASIC_FEATURES */ \
.flags = PHY_IS_INTERNAL, \
+ .soft_reset = genphy_soft_reset, \
.config_init = bcm7xxx_config_init, \
.suspend = bcm7xxx_suspend, \
.resume = bcm7xxx_config_init, \

\
 
 \ /
  Last update: 2019-11-08 20:11    [W:0.401 / U:2.800 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site