lkml.org 
[lkml]   [2019]   [Nov]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 1/2] dt-bindings: drm/bridge: anx7625: MIPI to DP transmitter binding
Date
The ANX7625 is an ultra-low power 4K Mobile HD Transmitter designed
for portable device. It converts MIPI to DisplayPort 1.3 4K.

You can add support to your board with binding.

Example:
anx7625_bridge: encoder@58 {
compatible = "analogix,anx7625";
reg = <0x58>;
status = "okay";
panel-flags = <1>;
enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>;
reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>;
#address-cells = <1>;
#size-cells = <0>;

port@0 {
reg = <0>;
anx_1_in: endpoint {
remote-endpoint = <&mipi_dsi>;
};
};

port@2 {
reg = <2>;
anx_1_out: endpoint {
remote-endpoint = <&panel_in>;
};
};
};

Signed-off-by: Xin Ji <xji@analogixsemi.com>
---
.../bindings/display/bridge/anx7625.yaml | 91 ++++++++++++++++++++++
1 file changed, 91 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/bridge/anx7625.yaml

diff --git a/Documentation/devicetree/bindings/display/bridge/anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/anx7625.yaml
new file mode 100644
index 0000000..1149ebb
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/anx7625.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 Analogix Semiconductor, Inc.
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/display/bridge/anx7625.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Analogix ANX7625 SlimPort (4K Mobile HD Transmitter)
+
+maintainers:
+ - Xin Ji <xji@analogixsemi.com>
+
+description: |
+ The ANX7625 is an ultra-low power 4K Mobile HD Transmitter
+ designed for portable devices.
+
+properties:
+ "#address-cells": true
+ "#size-cells": true
+
+ compatible:
+ items:
+ - const: analogix,anx7625
+
+ reg:
+ maxItems: 1
+
+ panel-flags:
+ description: indicate the panel is internal or external.
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ enable-gpios:
+ description: used for power on chip control, POWER_EN pin D2.
+ maxItems: 1
+
+ reset-gpios:
+ description: used for reset chip control, RESET_N pin B7.
+ maxItems: 1
+
+ port@0:
+ type: object
+ description:
+ A port node pointing to MIPI DSI host port node.
+
+ port@1:
+ type: object
+ description:
+ A port node pointing to MIPI DPI host port node.
+
+ port@2:
+ type: object
+ description:
+ A port node pointing to panel port node.
+
+required:
+ - "#address-cells"
+ - "#size-cells"
+ - compatible
+ - reg
+ - port@0
+ - port@2
+
+example:
+ - |
+ anx7625_bridge: encoder@58 {
+ compatible = "analogix,anx7625";
+ reg = <0x58>;
+ status = "okay";
+ panel-flags = <1>;
+ enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ anx_1_in: endpoint {
+ remote-endpoint = <&mipi_dsi>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ anx_1_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
--
2.7.4
\
 
 \ /
  Last update: 2019-11-08 10:00    [W:0.043 / U:4.172 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site