lkml.org 
[lkml]   [2019]   [Nov]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 6/7] arm64: dts: allwinner: h6: Add PWM node
Date
From: Jernej Skrabec <jernej.skrabec@siol.net>

Allwinner H6 PWM is similar to that in A20 except that it has additional
bus clock and reset line.

Note that first PWM channel is connected to output pin and second
channel is used internally, as a clock source to AC200 co-packaged chip.
This means that any combination of these two channels can be used and
thus it doesn't make sense to add pinctrl nodes at this point.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
---
arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index 0d5ea19336a1..b0d9ee1ead13 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -222,6 +222,16 @@
status = "disabled";
};

+ pwm: pwm@300a000 {
+ compatible = "allwinner,sun50i-h6-pwm";
+ reg = <0x0300a000 0x400>;
+ clocks = <&osc24M>, <&ccu CLK_BUS_PWM>;
+ clock-names = "mod", "bus";
+ resets = <&ccu RST_BUS_PWM>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
pio: pinctrl@300b000 {
compatible = "allwinner,sun50i-h6-pinctrl";
reg = <0x0300b000 0x400>;
--
2.20.1
\
 
 \ /
  Last update: 2019-11-08 09:46    [W:0.117 / U:7.868 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site