lkml.org 
[lkml]   [2019]   [Nov]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [Patch v2 3/5] ARM: dts: dra7: add vpe clkctrl node
Hi,

* Benoit Parrot <bparrot@ti.com> [191104 20:39]:
> Add clkctrl nodes for VPE module.

Can you please add a comment describing that we currently need to
use custom node names here instead of the standard naming?

I can queue this and other dts change once I have an immutable clock
changes branch from Tero.

Or if Tero wants to also pick up the clock node dtsi patch I can ack it,
up to Tero.

Regards,

Tony


> Signed-off-by: Benoit Parrot <bparrot@ti.com>
> ---
> arch/arm/boot/dts/dra7xx-clocks.dtsi | 18 ++++++++++++++++--
> 1 file changed, 16 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi
> index 93e1eb83bed9..d1c2406ec71c 100644
> --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi
> +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi
> @@ -1591,10 +1591,10 @@
>
> rtc_cm: rtc-cm@700 {
> compatible = "ti,omap4-cm";
> - reg = <0x700 0x100>;
> + reg = <0x700 0x60>;
> #address-cells = <1>;
> #size-cells = <1>;
> - ranges = <0 0x700 0x100>;
> + ranges = <0 0x700 0x60>;
>
> rtc_clkctrl: rtc-clkctrl@20 {
> compatible = "ti,clkctrl";
> @@ -1603,6 +1603,20 @@
> };
> };
>
> + vpe_cm: vpe-cm@760 {
> + compatible = "ti,omap4-cm";
> + reg = <0x760 0xc>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0x760 0xc>;
> +
> + vpe_clkctrl: vpe-clkctrl@0 {
> + compatible = "ti,clkctrl";
> + reg = <0x0 0xc>;
> + #clock-cells = <2>;
> + };
> + };
> +
> };
>
> &cm_core {
> --
> 2.17.1
>

\
 
 \ /
  Last update: 2019-11-08 17:56    [W:0.082 / U:4.088 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site