lkml.org 
[lkml]   [2019]   [Nov]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 5/5] PCI: Allow building PCIe things without PCIEPORTBUS
On Wed, Nov 06, 2019 at 04:24:21PM -0600, Bjorn Helgaas wrote:
> From: Bjorn Helgaas <bhelgaas@google.com>
>
> Some things in drivers/pci/pcie (aspm.c and ptm.c) do not depend on the
> PCIe portdrv, so we should be able to build them even if PCIEPORTBUS is not
> selected. Remove the PCIEPORTBUS guard from building pcie/.
>
> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
> ---
> drivers/pci/Makefile | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
> index 28cdd8c0213a..522d2b974e91 100644
> --- a/drivers/pci/Makefile
> +++ b/drivers/pci/Makefile
> @@ -7,6 +7,8 @@ obj-$(CONFIG_PCI) += access.o bus.o probe.o host-bridge.o \
> pci-sysfs.o rom.o setup-res.o irq.o vpd.o \
> setup-bus.o vc.o mmap.o setup-irq.o
>
> +obj-$(CONFIG_PCI) += pcie/
> +
> ifdef CONFIG_PCI
> obj-$(CONFIG_PROC_FS) += proc.o
> obj-$(CONFIG_SYSFS) += slot.o
> @@ -15,7 +17,6 @@ endif
>
> obj-$(CONFIG_OF) += of.o
> obj-$(CONFIG_PCI_QUIRKS) += quirks.o
> -obj-$(CONFIG_PCIEPORTBUS) += pcie/
> obj-$(CONFIG_HOTPLUG_PCI) += hotplug/
> obj-$(CONFIG_PCI_MSI) += msi.o
> obj-$(CONFIG_PCI_ATS) += ats.o

Reviewed-by: Andrew Murray <andrew.murray@arm.com>

> --
> 2.24.0.rc1.363.gb1bccd3e3d-goog
>

\
 
 \ /
  Last update: 2019-11-07 10:43    [W:0.060 / U:0.880 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site